[PATCH] platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8DD6)

[Krishna Chomal <krishna.chomal108@gmail.com>]

The HP OMEN MAX 16-ak0xxx (board ID: 8DD6) has the same WMI interface
as other Victus S boards, but requires quirks for correctly switching
thermal profile.

After testing we know that (similar to another HP Omen Max 16 device,
board ID 8D87), the embedded controller on this board does not expose
thermal profile which means we have to intentionally disable EC readback.

Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_no_ec_thermal_params.

Testing on board 8DD6 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.

Tested-by: Yahia Ahmed <yahmedd043@gmail.com>
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
---
Based on review-ilpo-next branch.
---
 drivers/platform/x86/hp/hp-wmi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c
index 8ba286ed8721..94147102cca4 100644
--- a/drivers/platform/x86/hp/hp-wmi.c
+++ b/drivers/platform/x86/hp/hp-wmi.c
@@ -265,6 +265,10 @@ static const struct dmi_system_id victus_s_thermal_profile_boards[] __initconst
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8D87") },
 		.driver_data = (void *)&omen_v1_no_ec_thermal_params,
 	},
+	{
+		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8DD6") },
+		.driver_data = (void *)&omen_v1_no_ec_thermal_params,
+	},
 	{
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8E35") },
 		.driver_data = (void *)&omen_v1_legacy_thermal_params,
-- 
2.54.0