From: Hans de Goede <hdegoede@redhat.com>
To: Orlando Chamberlain <orlandoch.dev@gmail.com>,
platform-driver-x86@vger.kernel.org,
amd-gfx@lists.freedesktop.org, linux-kernel@vger.kernel.org,
alsa-devel@alsa-project.org
Cc: "Alex Deucher" <alexander.deucher@amd.com>,
"Christian König" <christian.koenig@amd.com>,
"Pan, Xinhui" <Xinhui.Pan@amd.com>,
"David Airlie" <airlied@gmail.com>,
"Daniel Vetter" <daniel@ffwll.ch>,
"Mark Gross" <markgross@kernel.org>,
"Jaroslav Kysela" <perex@perex.cz>,
"Takashi Iwai" <tiwai@suse.com>,
"Hawking Zhang" <Hawking.Zhang@amd.com>,
"Andrey Grodzovsky" <andrey.grodzovsky@amd.com>,
"Lijo Lazar" <lijo.lazar@amd.com>,
"YiPeng Chai" <YiPeng.Chai@amd.com>,
"Somalapuram Amaranath" <Amaranath.Somalapuram@amd.com>,
"Mario Limonciello" <mario.limonciello@amd.com>,
"Bokun Zhang" <Bokun.Zhang@amd.com>,
"Jack Xiao" <Jack.Xiao@amd.com>,
"Kai Vehmanen" <kai.vehmanen@linux.intel.com>,
"Pierre-Louis Bossart" <pierre-louis.bossart@linux.intel.com>,
"Rander Wang" <rander.wang@intel.com>,
"Ranjani Sridharan" <ranjani.sridharan@linux.intel.com>,
"Amadeusz Sławiński" <amadeuszx.slawinski@linux.intel.com>,
"Yong Zhi" <yong.zhi@intel.com>, "Evan Quan" <evan.quan@amd.com>,
"Kerem Karabay" <kekrby@gmail.com>,
"Aditya Garg" <gargaditya08@live.com>,
"Aun-Ali Zaidi" <admin@kodeit.net>
Subject: Re: [RFC PATCH 7/9] apple-gmux: add sysfs interface
Date: Fri, 10 Feb 2023 21:15:50 +0100 [thread overview]
Message-ID: <3e6c6cba-ad53-d380-a028-840fb19dbfcb@redhat.com> (raw)
In-Reply-To: <20230210044826.9834-8-orlandoch.dev@gmail.com>
Hi,
On 2/10/23 05:48, Orlando Chamberlain wrote:
> Allow reading gmux ports from userspace. When the unsafe module
> parameter allow_user_writes is true, writing 1 byte
> values is also allowed.
>
> For example:
>
> cd /sys/bus/acpi/devices/APP000B:00/physical_node/
> echo 4 > gmux_selected_port
> cat gmux_selected_port_data | xxd -p
>
> Will show the gmux version information (00000005 in this case)
Please use debugfs for this and as part of the conversion
drop the #ifdef-s (debugfs has stubs for when not enabled)
and drop all the error checking of creating the files, debugfs
is deliberately designed to not have any error checking in
the setup / teardown code.
This also removes the need for the allow_user_writes parameter
replacing it with the new kernel lockdown mechanism. debugfs
will automatically block access to writable files when
the kernel is in lockdown mode.
Regards,
Hans
> Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
> ---
> drivers/platform/x86/apple-gmux.c | 129 ++++++++++++++++++++++++++++++
> 1 file changed, 129 insertions(+)
>
> diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c
> index c38d6ef0c15a..756059d48393 100644
> --- a/drivers/platform/x86/apple-gmux.c
> +++ b/drivers/platform/x86/apple-gmux.c
> @@ -66,6 +66,11 @@ struct apple_gmux_data {
> enum vga_switcheroo_client_id switch_state_external;
> enum vga_switcheroo_state power_state;
> struct completion powerchange_done;
> +
> +#ifdef CONFIG_SYSFS
> + /* sysfs data */
> + int selected_port;
> +#endif /* CONFIG_SYSFS */
> };
>
> static struct apple_gmux_data *apple_gmux_data;
> @@ -651,6 +656,121 @@ static void gmux_notify_handler(acpi_handle device, u32 value, void *context)
> complete(&gmux_data->powerchange_done);
> }
>
> +/**
> + * DOC: Sysfs Interface
> + *
> + * gmux ports can be read from userspace as a sysfs interface. For example:
> + *
> + * # echo 4 > /sys/bus/acpi/devices/APP000B:00/physical_node/gmux_selected_port
> + * # cat /sys/bus/acpi/devices/APP000B:00/physical_node/gmux_selected_port_data | xxd -p
> + * 00000005
> + *
> + * Reads 4 bytes from port 4 (GMUX_PORT_VERSION_MAJOR).
> + *
> + * Single byte writes are also supported, however this must be enabled with the
> + * unsafe allow_user_writes module parameter.
> + *
> + */
> +
> +#ifdef CONFIG_SYSFS
> +
> +static bool allow_user_writes;
> +module_param_unsafe(allow_user_writes, bool, 0);
> +MODULE_PARM_DESC(allow_user_writes, "Allow userspace to write to gmux ports (default: false) (bool)");
> +
> +static ssize_t gmux_selected_port_store(struct device *dev,
> + struct device_attribute *attr, const char *sysfsbuf, size_t count)
> +{
> + struct apple_gmux_data *gmux_data = dev_get_drvdata(dev);
> + u8 port;
> +
> + if (kstrtou8(sysfsbuf, 10, &port) < 0)
> + return -EINVAL;
> +
> + /* On pio gmux's, make sure the user doesn't access too high of a port. */
> + if ((gmux_data->config == &apple_gmux_pio) &&
> + port > (gmux_data->iolen - 4))
> + return -EINVAL;
> +
> + gmux_data->selected_port = port;
> + return count;
> +}
> +
> +static ssize_t gmux_selected_port_show(struct device *dev,
> + struct device_attribute *attr, char *sysfsbuf)
> +{
> + struct apple_gmux_data *gmux_data = dev_get_drvdata(dev);
> +
> + return sysfs_emit(sysfsbuf, "%d\n", gmux_data->selected_port);
> +}
> +
> +DEVICE_ATTR_RW(gmux_selected_port);
> +
> +static ssize_t gmux_selected_port_data_store(struct device *dev,
> + struct device_attribute *attr, const char *sysfsbuf, size_t count)
> +{
> + struct apple_gmux_data *gmux_data = dev_get_drvdata(dev);
> +
> + if (count == 1)
> + gmux_write8(gmux_data, gmux_data->selected_port, *sysfsbuf);
> + else
> + return -EINVAL;
> +
> + return count;
> +}
> +
> +static ssize_t gmux_selected_port_data_show(struct device *dev,
> + struct device_attribute *attr, char *sysfsbuf)
> +{
> + struct apple_gmux_data *gmux_data = dev_get_drvdata(dev);
> + u32 data;
> +
> + data = gmux_read32(gmux_data, gmux_data->selected_port);
> + memcpy(sysfsbuf, &data, sizeof(data));
> +
> + return sizeof(data);
> +}
> +
> +struct device_attribute dev_attr_gmux_selected_port_data_rw = __ATTR_RW(gmux_selected_port_data);
> +struct device_attribute dev_attr_gmux_selected_port_data_ro = __ATTR_RO(gmux_selected_port_data);
> +
> +static int gmux_init_sysfs(struct pnp_dev *pnp)
> +{
> + int ret;
> +
> + ret = device_create_file(&pnp->dev, &dev_attr_gmux_selected_port);
> + if (ret)
> + return ret;
> + if (allow_user_writes)
> + ret = device_create_file(&pnp->dev, &dev_attr_gmux_selected_port_data_rw);
> + else
> + ret = device_create_file(&pnp->dev, &dev_attr_gmux_selected_port_data_ro);
> + if (ret)
> + device_remove_file(&pnp->dev, &dev_attr_gmux_selected_port);
> + return ret;
> +}
> +
> +static void gmux_fini_sysfs(struct pnp_dev *pnp)
> +{
> + device_remove_file(&pnp->dev, &dev_attr_gmux_selected_port);
> + if (allow_user_writes)
> + device_remove_file(&pnp->dev, &dev_attr_gmux_selected_port_data_rw);
> + else
> + device_remove_file(&pnp->dev, &dev_attr_gmux_selected_port_data_ro);
> +}
> +
> +#else
> +
> +static int gmux_init_sysfs(struct pnp_dev *pnp)
> +{
> + return 0;
> +}
> +static void gmux_fini_sysfs(struct pnp_dev *pnp)
> +{
> +}
> +
> +#endif /* CONFIG_SYSFS */
> +
> static int gmux_suspend(struct device *dev)
> {
> struct pnp_dev *pnp = to_pnp_dev(dev);
> @@ -846,8 +966,16 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
> goto err_register_handler;
> }
>
> + ret = gmux_init_sysfs(pnp);
> + if (ret) {
> + pr_err("Failed to register gmux sysfs entries\n");
> + goto err_sysfs;
> + }
> +
> return 0;
>
> +err_sysfs:
> + vga_switcheroo_unregister_handler();
> err_register_handler:
> gmux_disable_interrupts(gmux_data);
> apple_gmux_data = NULL;
> @@ -877,6 +1005,7 @@ static void gmux_remove(struct pnp_dev *pnp)
> {
> struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp);
>
> + gmux_fini_sysfs(pnp);
> vga_switcheroo_unregister_handler();
> gmux_disable_interrupts(gmux_data);
> if (gmux_data->gpe >= 0) {
next prev parent reply other threads:[~2023-02-10 20:16 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-10 4:48 [RFC PATCH 0/9] apple-gmux: support MMIO gmux type on T2 Macs Orlando Chamberlain
2023-02-10 4:48 ` [RFC PATCH 1/9] apple-gmux: use cpu_to_be32 instead of manual reorder Orlando Chamberlain
2023-02-10 19:09 ` Hans de Goede
2023-02-10 19:19 ` Hans de Goede
2023-02-10 23:30 ` Orlando Chamberlain
2023-02-11 11:27 ` Hans de Goede
2023-02-10 19:33 ` Hans de Goede
2023-02-10 22:52 ` David Laight
2023-02-10 4:48 ` [RFC PATCH 2/9] apple-gmux: consolidate version reading Orlando Chamberlain
2023-02-10 19:41 ` Hans de Goede
2023-02-10 23:36 ` Orlando Chamberlain
2023-02-10 4:48 ` [RFC PATCH 3/9] apple-gmux: use first bit to check switch state Orlando Chamberlain
2023-02-10 4:48 ` [RFC PATCH 4/9] apple-gmux: refactor gmux types Orlando Chamberlain
2023-02-10 4:48 ` [RFC PATCH 5/9] apple-gmux: Use GMSP acpi method for interrupt clear Orlando Chamberlain
2023-02-10 19:43 ` Hans de Goede
2023-02-10 23:40 ` Orlando Chamberlain
2023-02-10 4:48 ` [RFC PATCH 6/9] apple-gmux: support MMIO gmux on T2 Macs Orlando Chamberlain
2023-02-10 4:48 ` [RFC PATCH 7/9] apple-gmux: add sysfs interface Orlando Chamberlain
2023-02-10 20:15 ` Hans de Goede [this message]
2023-02-10 20:23 ` Hans de Goede
2023-02-10 23:44 ` Orlando Chamberlain
2023-02-10 4:48 ` [RFC PATCH 8/9] hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks Orlando Chamberlain
2023-02-10 4:48 ` [RFC PATCH 9/9] drm/amdgpu: register a vga_switcheroo client for all GPUs that are not thunderbolt attached Orlando Chamberlain
2023-02-10 15:53 ` Alex Deucher
2023-02-10 16:07 ` Hans de Goede
2023-02-10 16:37 ` Alex Deucher
2023-02-10 23:54 ` Orlando Chamberlain
2023-02-10 16:30 ` [RFC PATCH 0/9] apple-gmux: support MMIO gmux type on T2 Macs Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3e6c6cba-ad53-d380-a028-840fb19dbfcb@redhat.com \
--to=hdegoede@redhat.com \
--cc=Amaranath.Somalapuram@amd.com \
--cc=Bokun.Zhang@amd.com \
--cc=Hawking.Zhang@amd.com \
--cc=Jack.Xiao@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=YiPeng.Chai@amd.com \
--cc=admin@kodeit.net \
--cc=airlied@gmail.com \
--cc=alexander.deucher@amd.com \
--cc=alsa-devel@alsa-project.org \
--cc=amadeuszx.slawinski@linux.intel.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=andrey.grodzovsky@amd.com \
--cc=christian.koenig@amd.com \
--cc=daniel@ffwll.ch \
--cc=evan.quan@amd.com \
--cc=gargaditya08@live.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=kekrby@gmail.com \
--cc=lijo.lazar@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=markgross@kernel.org \
--cc=orlandoch.dev@gmail.com \
--cc=perex@perex.cz \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rander.wang@intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=tiwai@suse.com \
--cc=yong.zhi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox