Re: hp-wmi: Fix thermal profile board classification for HP Omen Max 16 (8D41)

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

[-- Attachment #1: Type: text/plain, Size: 1332 bytes --]

Hi Krishna,

Could please take a look what's going on here. It seems 8D41 was in 
victus_s_thermal_profile_boards[] even before the dmi_system_id 
conversion in the commit 8ca7515d3c76 ("platform/x86: hp-wmi: fix 
platform profile values for Omen 16-wf1xxx").

On Wed, 22 Apr 2026, Ben Young wrote:

> Unfortunately - the fans do not change speed upon terminal commands. The 
> HP-WMI is properly loaded and recognizes the board, but appears to not 
> allow any level of fan change. Do you have any recommendations? This is 
> important to HP laptop owners.  
> 
> Thank you!
> 
> Sent from my iPhone
> 
> > On Apr 21, 2026, at 8:18 PM, Benjamin Young <benj.n.yng@gmail.com> wrote:
> > 
> > Subject: hp-wmi: Fix thermal profile board classification for HP Omen Max 16 (8D41)
> > 
> > Board 8D41 (HP Omen MAX Gaming Laptop 16t-ah000) was incorrectly added
> > to victus_s_thermal_profile_boards in kernel 7.0, causing hp-wmi probe
> > to fail with -EINVAL.
> > 
> > The fix is to remove 8D41 from victus_s_thermal_profile_boards and add
> > it to omen_thermal_profile_boards whitelist instead.
> > 
> > Tested on HP Omen MAX Gaming Laptop 16t-ah000, BIOS F.21, kernel
> > 7.0.0-1-cachyos-bore. After the fix, hp_wmi registers successfully as
> > a platform profile handler.
> > 
> 

-- 
 i.