From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
markgross@kernel.org, basavaraj.natikar@amd.com,
jikos@kernel.org, benjamin.tissoires@redhat.com,
alexander.deucher@amd.com, christian.koenig@amd.com,
Xinhui.Pan@amd.com, airlied@gmail.com, daniel@ffwll.ch,
Patil.Reddy@amd.com, mario.limonciello@amd.com,
platform-driver-x86@vger.kernel.org, linux-input@vger.kernel.org,
amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v2 01/16] platform/x86/amd/pmf: Add PMF TEE interface
Date: Wed, 4 Oct 2023 13:50:01 +0300 (EEST) [thread overview]
Message-ID: <584aebd-5c89-d085-275-bb79f93429f@linux.intel.com> (raw)
In-Reply-To: <20230930083715.2050863-2-Shyam-sundar.S-k@amd.com>
On Sat, 30 Sep 2023, Shyam Sundar S K wrote:
> AMD PMF driver loads the PMF TA (Trusted Application) into the AMD
> ASP's (AMD Security Processor) TEE (Trusted Execution Environment).
>
> PMF Trusted Application is a secured firmware placed under
> /lib/firmware/amdtee gets loaded only when the TEE environment is
> initialized. Add the initial code path to build these pipes.
>
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> ---
> drivers/platform/x86/amd/pmf/Makefile | 3 +-
> drivers/platform/x86/amd/pmf/core.c | 11 ++-
> drivers/platform/x86/amd/pmf/pmf.h | 16 ++++
> drivers/platform/x86/amd/pmf/tee-if.c | 112 ++++++++++++++++++++++++++
> 4 files changed, 138 insertions(+), 4 deletions(-)
> create mode 100644 drivers/platform/x86/amd/pmf/tee-if.c
>
> diff --git a/drivers/platform/x86/amd/pmf/Makefile b/drivers/platform/x86/amd/pmf/Makefile
> index fdededf54392..d2746ee7369f 100644
> --- a/drivers/platform/x86/amd/pmf/Makefile
> +++ b/drivers/platform/x86/amd/pmf/Makefile
> @@ -6,4 +6,5 @@
>
> obj-$(CONFIG_AMD_PMF) += amd-pmf.o
> amd-pmf-objs := core.o acpi.o sps.o \
> - auto-mode.o cnqf.o
> + auto-mode.o cnqf.o \
> + tee-if.o
> diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c
> index 78ed3ee22555..68f1389dda3e 100644
> --- a/drivers/platform/x86/amd/pmf/core.c
> +++ b/drivers/platform/x86/amd/pmf/core.c
> @@ -309,8 +309,11 @@ static void amd_pmf_init_features(struct amd_pmf_dev *dev)
> dev_dbg(dev->dev, "SPS enabled and Platform Profiles registered\n");
> }
>
> - /* Enable Auto Mode */
> - if (is_apmf_func_supported(dev, APMF_FUNC_AUTO_MODE)) {
> + if (amd_pmf_init_smart_pc(dev)) {
> + /* Enable Smart PC Solution builder */
> + dev_dbg(dev->dev, "Smart PC Solution Enabled\n");
> + } else if (is_apmf_func_supported(dev, APMF_FUNC_AUTO_MODE)) {
> + /* Enable Auto Mode */
I'm pretty certain neither of these two comments add any information to
what's readily visible from the code itself so they can be dropped.
> amd_pmf_init_auto_mode(dev);
> dev_dbg(dev->dev, "Auto Mode Init done\n");
> } else if (is_apmf_func_supported(dev, APMF_FUNC_DYN_SLIDER_AC) ||
> @@ -330,7 +333,9 @@ static void amd_pmf_deinit_features(struct amd_pmf_dev *dev)
> amd_pmf_deinit_sps(dev);
> }
>
> - if (is_apmf_func_supported(dev, APMF_FUNC_AUTO_MODE)) {
> + if (dev->smart_pc_enabled) {
> + amd_pmf_deinit_smart_pc(dev);
> + } else if (is_apmf_func_supported(dev, APMF_FUNC_AUTO_MODE)) {
> amd_pmf_deinit_auto_mode(dev);
> } else if (is_apmf_func_supported(dev, APMF_FUNC_DYN_SLIDER_AC) ||
> is_apmf_func_supported(dev, APMF_FUNC_DYN_SLIDER_DC)) {
> diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
> index deba88e6e4c8..02460c2a31ea 100644
> --- a/drivers/platform/x86/amd/pmf/pmf.h
> +++ b/drivers/platform/x86/amd/pmf/pmf.h
> @@ -179,6 +179,12 @@ struct amd_pmf_dev {
> bool cnqf_enabled;
> bool cnqf_supported;
> struct notifier_block pwr_src_notifier;
> + /* Smart PC solution builder */
> + struct tee_context *tee_ctx;
> + struct tee_shm *fw_shm_pool;
> + u32 session_id;
> + void *shbuf;
> + bool smart_pc_enabled;
> };
>
> struct apmf_sps_prop_granular {
> @@ -389,6 +395,13 @@ struct apmf_dyn_slider_output {
> struct apmf_cnqf_power_set ps[APMF_CNQF_MAX];
> } __packed;
>
> +struct ta_pmf_shared_memory {
> + int command_id;
> + int resp_id;
> + u32 pmf_result;
> + u32 if_version;
> +};
> +
> /* Core Layer */
> int apmf_acpi_init(struct amd_pmf_dev *pmf_dev);
> void apmf_acpi_deinit(struct amd_pmf_dev *pmf_dev);
> @@ -433,4 +446,7 @@ void amd_pmf_deinit_cnqf(struct amd_pmf_dev *dev);
> int amd_pmf_trans_cnqf(struct amd_pmf_dev *dev, int socket_power, ktime_t time_lapsed_ms);
> extern const struct attribute_group cnqf_feature_attribute_group;
>
> +/* Smart PC builder Layer*/
Missing space.
> +int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev);
> +void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev);
> #endif /* PMF_H */
> diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
> new file mode 100644
> index 000000000000..4db80ca59a11
> --- /dev/null
> +++ b/drivers/platform/x86/amd/pmf/tee-if.c
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * AMD Platform Management Framework Driver - TEE Interface
> + *
> + * Copyright (c) 2023, Advanced Micro Devices, Inc.
> + * All Rights Reserved.
> + *
> + * Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> + */
> +
> +#include <linux/tee_drv.h>
> +#include <linux/uuid.h>
> +#include "pmf.h"
> +
> +#define MAX_TEE_PARAM 4
> +static const uuid_t amd_pmf_ta_uuid = UUID_INIT(0x6fd93b77, 0x3fb8, 0x524d,
> + 0xb1, 0x2d, 0xc5, 0x29, 0xb1, 0x3d, 0x85, 0x43);
> +
> +static int amd_pmf_amdtee_ta_match(struct tee_ioctl_version_data *ver, const void *data)
> +{
> + return ver->impl_id == TEE_IMPL_ID_AMDTEE;
> +}
> +
> +static int amd_pmf_ta_open_session(struct tee_context *ctx, u32 *id)
> +{
> + struct tee_ioctl_open_session_arg sess_arg = {};
> + int rc;
> +
> + export_uuid(sess_arg.uuid, &amd_pmf_ta_uuid);
> + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
> + sess_arg.num_params = 0;
> +
> + rc = tee_client_open_session(ctx, &sess_arg, NULL);
> + if (rc < 0 || sess_arg.ret != 0) {
> + pr_err("Failed to open TEE session err:%#x, ret:%#x\n", sess_arg.ret, rc);
Print normal -Exx error codes as %d, not %x (rc). I don't know what would
be best to do with sess_arg.ret, TEEC_ERROR_* look like errnos (negative
values) manually converted into u32.
> + rc = -EINVAL;
If rc < 0, I think you should just pass the error code on.
> + } else {
> + *id = sess_arg.session;
> + }
> +
> + return rc;
> +}
> +
> +static int amd_pmf_tee_init(struct amd_pmf_dev *dev)
> +{
> + int ret;
> + u32 size;
> +
> + /* Open context with TEE driver */
Too obvious comment to stay, it's what the code already says on the next
line so there's little point to repeat something this obvious in the
comments.
> + dev->tee_ctx = tee_client_open_context(NULL, amd_pmf_amdtee_ta_match, NULL, NULL);
> + if (IS_ERR(dev->tee_ctx)) {
> + dev_err(dev->dev, "Failed to open TEE context\n");
> + return PTR_ERR(dev->tee_ctx);
> + }
> +
> + /* Open session with PMF Trusted App */
Remove this one too.
> + ret = amd_pmf_ta_open_session(dev->tee_ctx, &dev->session_id);
> + if (ret) {
> + dev_err(dev->dev, "Failed to open TA session (%d)\n", ret);
> + ret = -EINVAL;
> + goto out_ctx;
> + }
> +
> + size = sizeof(struct ta_pmf_shared_memory);
> + dev->fw_shm_pool = tee_shm_alloc_kernel_buf(dev->tee_ctx, size);
> + if (IS_ERR(dev->fw_shm_pool)) {
> + dev_err(dev->dev, "Failed to alloc TEE shared memory\n");
> + ret = PTR_ERR(dev->fw_shm_pool);
> + goto out_sess;
> + }
> +
> + dev->shbuf = tee_shm_get_va(dev->fw_shm_pool, 0);
> + if (IS_ERR(dev->shbuf)) {
> + dev_err(dev->dev, "Failed to get TEE virtual address\n");
> + ret = PTR_ERR(dev->shbuf);
> + goto out_shm;
> + }
> + dev_dbg(dev->dev, "TEE init done\n");
> +
> + return 0;
> +
> +out_shm:
> + tee_shm_free(dev->fw_shm_pool);
> +out_sess:
> + tee_client_close_session(dev->tee_ctx, dev->session_id);
> +out_ctx:
> + tee_client_close_context(dev->tee_ctx);
> +
> + return ret;
> +}
> +
> +static void amd_pmf_tee_deinit(struct amd_pmf_dev *dev)
> +{
> + /* Free the shared memory pool */
> + tee_shm_free(dev->fw_shm_pool);
> +
> + /* close the existing session with PMF TA*/
Missing space.
> + tee_client_close_session(dev->tee_ctx, dev->session_id);
> +
> + /* close the context with TEE driver */
> + tee_client_close_context(dev->tee_ctx);
> +}
> +
> +int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev)
> +{
> + return amd_pmf_tee_init(dev);
> +}
> +
> +void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev)
> +{
> + amd_pmf_tee_deinit(dev);
> +}
>
--
i.
next prev parent reply other threads:[~2023-10-04 10:50 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-30 8:36 [PATCH v2 00/16] Introduce PMF Smart PC Solution Builder Feature Shyam Sundar S K
2023-09-30 8:37 ` [PATCH v2 01/16] platform/x86/amd/pmf: Add PMF TEE interface Shyam Sundar S K
2023-10-04 10:50 ` Ilpo Järvinen [this message]
2023-10-09 4:58 ` Shyam Sundar S K
2023-10-09 10:29 ` Ilpo Järvinen
2023-10-04 11:27 ` Ilpo Järvinen
2023-09-30 8:37 ` [PATCH v2 02/16] platform/x86/amd/pmf: Add support PMF-TA interaction Shyam Sundar S K
2023-10-04 10:56 ` Ilpo Järvinen
2023-10-04 12:02 ` Ilpo Järvinen
2023-09-30 8:37 ` [PATCH v2 03/16] platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr() Shyam Sundar S K
2023-10-04 11:03 ` Ilpo Järvinen
2023-09-30 8:37 ` [PATCH v2 04/16] platform/x86/amd/pmf: Add support for PMF Policy Binary Shyam Sundar S K
2023-10-04 12:00 ` Ilpo Järvinen
2023-10-09 5:15 ` Shyam Sundar S K
2023-10-09 10:49 ` Ilpo Järvinen
2023-09-30 8:37 ` [PATCH v2 05/16] platform/x86/amd/pmf: change amd_pmf_init_features() call sequence Shyam Sundar S K
2023-09-30 8:37 ` [PATCH v2 06/16] platform/x86/amd/pmf: Add support to get inputs from other subsystems Shyam Sundar S K
2023-10-04 12:14 ` Ilpo Järvinen
2023-10-09 5:20 ` Shyam Sundar S K
2023-10-09 10:26 ` Ilpo Järvinen
2023-09-30 8:37 ` [PATCH v2 07/16] platform/x86/amd/pmf: Add support update p3t limit Shyam Sundar S K
2023-09-30 8:37 ` [PATCH v2 08/16] platform/x86/amd/pmf: Add support to update system state Shyam Sundar S K
2023-10-04 12:23 ` Ilpo Järvinen
2023-10-09 5:44 ` Shyam Sundar S K
2023-09-30 8:37 ` [PATCH v2 09/16] platform/x86/amd/pmf: Add facility to dump TA inputs Shyam Sundar S K
2023-10-04 12:27 ` Ilpo Järvinen
2023-09-30 8:37 ` [PATCH v2 10/16] platform/x86/amd/pmf: Add capability to sideload of policy binary Shyam Sundar S K
2023-09-30 8:37 ` [PATCH v2 11/16] platform/x86/amd/pmf: dump policy binary data Shyam Sundar S K
2023-10-04 12:32 ` Ilpo Järvinen
2023-09-30 8:37 ` [PATCH v2 12/16] platform/x86/amd/pmf: Add PMF-AMDGPU get interface Shyam Sundar S K
2023-10-04 12:49 ` Ilpo Järvinen
2023-10-09 5:56 ` Shyam Sundar S K
2023-10-09 11:02 ` Ilpo Järvinen
2023-09-30 8:37 ` [PATCH v2 13/16] platform/x86/amd/pmf: Add PMF-AMDGPU set interface Shyam Sundar S K
2023-09-30 8:37 ` [PATCH v2 14/16] HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int() Shyam Sundar S K
2023-09-30 8:37 ` [PATCH v2 15/16] platform/x86/amd/pmf: Add PMF-AMDSFH interface for HPD Shyam Sundar S K
2023-09-30 8:37 ` [PATCH v2 16/16] platform/x86/amd/pmf: Add PMF-AMDSFH interface for ALS Shyam Sundar S K
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=584aebd-5c89-d085-275-bb79f93429f@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=Patil.Reddy@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=airlied@gmail.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=basavaraj.natikar@amd.com \
--cc=benjamin.tissoires@redhat.com \
--cc=christian.koenig@amd.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=hdegoede@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=markgross@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox