Re: [PATCH v3 07/14] xhci: Add Intel cherrytrail extended cap / otg phy mux handling

[Mathias Nyman <mathias.nyman@intel.com>]

On 22.09.2017 21:37, Hans de Goede wrote:
> The Intel cherrytrail xhci controller has an extended cap mmio-range
> which contains registers to control the muxing to the xhci (host mode)
> or the dwc3 (device mode) and vbus-detection for the otg usb-phy.
>
> Having a mux driver included in the xhci code (or under drivers/usb/host)
> is not desirable. So this commit adds a simple handler for this extended
> capability, which creates a platform device with the caps mmio region as
> resource, this allows us to write a separate platform mux driver for the
> mux.
>
> Note this commit adds a call to the new xhci_ext_cap_init() function
> to xhci_pci_probe(), it is added here because xhci_ext_cap_init() must
> be called only once. If in the future we also want to handle ext-caps
> on non pci XHCI HCDs from xhci_ext_cap_init() a call to it should also
> be added to other bus probe paths.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -Check xHCI controller PCI device-id instead of only checking for the
>   Intel Extended capability ID, as the Extended capability ID is used on
>   other model Intel xHCI controllers too
>
> Changes in v3:
> -Add a new generic xhci_ext_cap_init() function and handle the new
>   XHCI_INTEL_CHT_USB_MUX quirk there.
> ---

Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>