From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Suma Hegde <suma.hegde@amd.com>
Cc: platform-driver-x86@vger.kernel.org,
Hans de Goede <hdegoede@redhat.com>,
Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Subject: Re: [PATCH] platform/x86/amd/hsmp: Add support for HSMP protocol version 7 messages
Date: Wed, 13 Nov 2024 15:40:39 +0200 (EET) [thread overview]
Message-ID: <9fc854a6-8e22-e2b1-3101-17c6858b5389@linux.intel.com> (raw)
In-Reply-To: <20241113044654.2925058-1-suma.hegde@amd.com>
On Wed, 13 Nov 2024, Suma Hegde wrote:
> Following new HSMP messages are available on family 0x1A, model 0x00-0x1F
> platforms with protocol version 7. Add support for them in the driver.
> - SetXgmiPstateRange(26h)
> - CpuRailIsoFreqPolicy(27h)
> - DfcEnable(28h)
> - GetRaplUnit(30h)
> - GetRaplCoreCounter(31h)
> - GetRaplPackageCounter(32h)
>
> Also update HSMP message PwrEfficiencyModeSelection-21h. This message is
> updated to include GET option in recent firmware.
>
> Signed-off-by: Suma Hegde <suma.hegde@amd.com>
> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
> ---
> This patch is rebased on
> https://lore.kernel.org/platform-driver-x86/20241112120450.2407125-1-suma.hegde@amd.com/T/#t
>
> arch/x86/include/uapi/asm/amd_hsmp.h | 64 +++++++++++++++++++++++++++-
> drivers/platform/x86/amd/hsmp/hsmp.c | 46 ++++++++++++++++----
> 2 files changed, 99 insertions(+), 11 deletions(-)
>
> diff --git a/arch/x86/include/uapi/asm/amd_hsmp.h b/arch/x86/include/uapi/asm/amd_hsmp.h
> index e5d182c7373c..c83a5a7103b5 100644
> --- a/arch/x86/include/uapi/asm/amd_hsmp.h
> +++ b/arch/x86/include/uapi/asm/amd_hsmp.h
> @@ -50,6 +50,12 @@ enum hsmp_message_ids {
> HSMP_GET_METRIC_TABLE_VER, /* 23h Get metrics table version */
> HSMP_GET_METRIC_TABLE, /* 24h Get metrics table */
> HSMP_GET_METRIC_TABLE_DRAM_ADDR,/* 25h Get metrics table dram address */
> + HSMP_SET_XGMI_PSTATE_RANGE, /* 26h Set xGMI P-state range */
> + HSMP_CPU_RAIL_ISO_FREQ_POLICY, /* 27h Get/Set Cpu Iso frequency policy */
> + HSMP_DFC_ENABLE_CTRL, /* 28h Enable/Disable DF C-state */
> + HSMP_GET_RAPL_UNITS = 0x30, /* 30h Get scaling factor for energy */
> + HSMP_GET_RAPL_CORE_COUNTER, /* 31h Get core energy counter value */
> + HSMP_GET_RAPL_PACKAGE_COUNTER, /* 32h Get package energy counter value */
> HSMP_MSG_ID_MAX,
> };
>
> @@ -65,6 +71,7 @@ enum hsmp_msg_type {
> HSMP_RSVD = -1,
> HSMP_SET = 0,
> HSMP_GET = 1,
> + HSMP_SET_GET = 2,
> };
>
> enum hsmp_proto_versions {
> @@ -72,7 +79,8 @@ enum hsmp_proto_versions {
> HSMP_PROTO_VER3,
> HSMP_PROTO_VER4,
> HSMP_PROTO_VER5,
> - HSMP_PROTO_VER6
> + HSMP_PROTO_VER6,
> + HSMP_PROTO_VER7
> };
>
> struct hsmp_msg_desc {
> @@ -299,7 +307,7 @@ static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
> * HSMP_SET_POWER_MODE, num_args = 1, response_sz = 0
> * input: args[0] = power efficiency mode[2:0]
> */
> - {1, 0, HSMP_SET},
> + {1, 1, HSMP_SET_GET},
>
> /*
> * HSMP_SET_PSTATE_MAX_MIN, num_args = 1, response_sz = 0
> @@ -324,6 +332,58 @@ static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
> * output: args[1] = upper 32 bits of the address
> */
> {0, 2, HSMP_GET},
> +
> + /*
> + * HSMP_SET_XGMI_PSTATE_RANGE, num_args = 1, response_sz = 0
> + * input: args[0] = min xGMI p-state[15:8] + max xGMI p-state[7:0]
> + */
> + {1, 0, HSMP_SET},
> +
> + /*
> + * HSMP_CPU_RAIL_ISO_FREQ_POLICY, num_args = 1, response_sz = 1
> + * input: args[0] = set/get policy[31] +
> + * disable/enable independent control[0]
> + * output: args[0] = current policy[0]
> + */
> + {1, 1, HSMP_SET_GET},
> +
> + /*
> + * HSMP_DFC_ENABLE_CTRL, num_args = 1, response_sz = 1
> + * input: args[0] = set/get policy[31] + enable/disable DFC[0]
> + * output: args[0] = current policy[0]
> + */
> + {1, 1, HSMP_SET_GET},
> +
> + /* RESERVED(0x29-0x2f) */
> + {0, 0, HSMP_RSVD},
> + {0, 0, HSMP_RSVD},
> + {0, 0, HSMP_RSVD},
> + {0, 0, HSMP_RSVD},
> + {0, 0, HSMP_RSVD},
> + {0, 0, HSMP_RSVD},
> + {0, 0, HSMP_RSVD},
> +
> + /*
> + * HSMP_GET_RAPL_UNITS, response_sz = 1
> + * output: args[0] = tu value[19:16] + esu value[12:8]
> + */
> + {0, 1, HSMP_GET},
> +
> + /*
> + * HSMP_GET_RAPL_CORE_COUNTER, num_args = 1, response_sz = 1
> + * input: args[0] = apic id[15:0]
> + * output: args[0] = lower 32 bits of energy
> + * output: args[1] = upper 32 bits of energy
> + */
> + {1, 2, HSMP_GET},
> +
> + /*
> + * HSMP_GET_RAPL_PACKAGE_COUNTER, num_args = 0, response_sz = 1
> + * output: args[0] = lower 32 bits of energy
> + * output: args[1] = upper 32 bits of energy
> + */
> + {0, 2, HSMP_GET},
> +
> };
>
> /* Metrics table (supported only with proto version 6) */
> diff --git a/drivers/platform/x86/amd/hsmp/hsmp.c b/drivers/platform/x86/amd/hsmp/hsmp.c
> index f29dd93fbf0b..3108eaec61ec 100644
> --- a/drivers/platform/x86/amd/hsmp/hsmp.c
> +++ b/drivers/platform/x86/amd/hsmp/hsmp.c
> @@ -33,7 +33,7 @@
> #define HSMP_WR true
> #define HSMP_RD false
>
> -#define DRIVER_VERSION "2.3"
> +#define DRIVER_VERSION "2.4"
>
> static struct hsmp_plat_device hsmp_pdev;
>
> @@ -166,12 +166,23 @@ static int validate_message(struct hsmp_message *msg)
> /* msg_id is a reserved message ID */
> if (hsmp_msg_desc_table[msg->msg_id].type == HSMP_RSVD)
> return -ENOMSG;
> -
> - /* num_args and response_sz against the HSMP spec */
> - if (msg->num_args != hsmp_msg_desc_table[msg->msg_id].num_args ||
> - msg->response_sz != hsmp_msg_desc_table[msg->msg_id].response_sz)
> - return -EINVAL;
> -
> + /*
> + * Some older HSMP SET messages are updated to add GET in the same message.
> + * In these messages, GET returns the current value and SET also returns
> + * the successfully set value. To support this GET and SET in same message
> + * while maintaining backward compatibility for the HSMP users,
> + * hsmp_msg_desc_table indicates only maximum allowed response_sz.
> + */
> + if (hsmp_msg_desc_table[msg->msg_id].type == HSMP_SET_GET) {
> + if (msg->num_args != hsmp_msg_desc_table[msg->msg_id].num_args ||
> + msg->response_sz > hsmp_msg_desc_table[msg->msg_id].response_sz)
> + return -EINVAL;
> + } else {
> + /* only SET or GET messages go through this strict check */
> + if (msg->num_args != hsmp_msg_desc_table[msg->msg_id].num_args ||
> + msg->response_sz != hsmp_msg_desc_table[msg->msg_id].response_sz)
> + return -EINVAL;
Please do the common check outside the if.
--
i.
> + }
> return 0;
> }
>
> @@ -239,6 +250,23 @@ int hsmp_test(u16 sock_ind, u32 value)
> }
> EXPORT_SYMBOL_NS_GPL(hsmp_test, AMD_HSMP);
>
> +static bool is_get_msg(struct hsmp_message *msg)
> +{
> + if (hsmp_msg_desc_table[msg->msg_id].type == HSMP_GET)
> + return true;
> +
> + if (hsmp_msg_desc_table[msg->msg_id].type == HSMP_SET_GET) {
> + /*
> + * When same message numbers are used for both GET and SET operation,
> + * bit:31 indicates whether its SET or GET operation.
> + */
> + if (msg->args[0] & BIT(31))
> + return true;
> + }
> +
> + return false;
> +}
> +
> long hsmp_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
> {
> int __user *arguser = (int __user *)arg;
> @@ -261,7 +289,7 @@ long hsmp_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
> * Device is opened in O_WRONLY mode
> * Execute only set/configure commands
> */
> - if (hsmp_msg_desc_table[msg.msg_id].type != HSMP_SET)
> + if (is_get_msg(&msg))
> return -EPERM;
> break;
> case FMODE_READ:
> @@ -269,7 +297,7 @@ long hsmp_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
> * Device is opened in O_RDONLY mode
> * Execute only get/monitor commands
> */
> - if (hsmp_msg_desc_table[msg.msg_id].type != HSMP_GET)
> + if (!is_get_msg(&msg))
> return -EPERM;
> break;
> case FMODE_READ | FMODE_WRITE:
>
prev parent reply other threads:[~2024-11-13 13:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-13 4:46 [PATCH] platform/x86/amd/hsmp: Add support for HSMP protocol version 7 messages Suma Hegde
2024-11-13 13:40 ` Ilpo Järvinen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9fc854a6-8e22-e2b1-3101-17c6858b5389@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=hdegoede@redhat.com \
--cc=naveenkrishna.chatradhi@amd.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=suma.hegde@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox