X86 platform drivers
 help / color / mirror / Atom feed
From: "Michał Szczepaniak" <m.szczepaniak.000@gmail.com>
To: Armin Wolf <W_Armin@gmx.de>, Mattia Dongili <malattia@linux.it>
Cc: platform-driver-x86@vger.kernel.org
Subject: Re: [sony-laptop] Hardware keys are not properly mapped on Sony VAIO UX VGN-UX390N
Date: Tue, 18 Jun 2024 15:08:40 +0200	[thread overview]
Message-ID: <bb8ddd94-53e7-4824-94c6-f2ebff7d93ea@gmail.com> (raw)
In-Reply-To: <617b732c-f044-46ca-a7eb-cade979386c7@gmx.de>

On 18/06/2024 13:47, Armin Wolf wrote:
> Am 18.06.24 um 09:09 schrieb Michał Szczepaniak:
> 
>> On 18/06/2024 03:24, Mattia Dongili wrote:
>>> On Mon, Jun 17, 2024 at 12:48:13AM +0200, Armin Wolf wrote:
>>>> Am 16.06.24 um 22:34 schrieb Michał Szczepaniak:
>>>>
>>>>> On 16/06/2024 20:18, Armin Wolf wrote:
>>>>>> Hi,
>>>>>>
>>>>>> can you share the output of "acpidump"? The zoom-out button should
>>>>>> report KEY_ZOOMOUT, can you also share the output of dmesg
>>>>>> after loading the driver with the module parameter "debug=1" and
>>>>>> pressing the buttons?
>>> [...]
>>>>> dmesg:
>>>>> [   19.108393] [  T475] sony_laptop: detected Type3 model
>>>>> [   19.108407] [  T475] sony_laptop: Evaluating _STA
>>>>> [   19.115105] [  T475] sony_laptop: Device disabled
>>>>> [   19.115115] [  T475] sony_laptop: Evaluating _PRS
>>>>> [   19.115145] [  T475] sony_laptop: IO1 at 0xc000 (0x20)
>>>>> [   19.115150] [  T475] sony_laptop: IO1 at 0xc800 (0x20)
>>>>> [   19.115154] [  T475] sony_laptop: IO1 at 0xd000 (0x20)
>>>>> [   19.115157] [  T475] sony_laptop: IO1 at 0xd800 (0x20)
>>>>> [   19.115294] [  T475] input: Sony Vaio Keys as
>>>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/SNY6001:00/input/input6
>>>>>
>>>>> [   19.115631] [  T475] input: Sony Vaio Jogdial as
>>>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/SNY6001:00/input/input7
>>>>>
>>>>> [   19.118777] [  T475] sony_laptop: device allocated minor is 123
>>>>> [   19.118791] [  T475] sony_laptop: I/O port1: 0xc000 (0xc000) + 0x20
>>>>> [   19.118826] [    C0] sony_laptop: event ([ff] [ff]) at port
>>>>> 0xc000(+0x12)
>>>>> [   19.118839] [  T475] sony_laptop: IRQ: 6 - triggering: 1 -
>>>>> polarity: 0 - shr: 0
>>>>> [   19.118844] [  T475] sony_laptop: Evaluating _SRS
>>>>> [   19.128310] [    C0] sony_laptop: event ([ff] [ff]) at port
>>>>> 0xc000(+0x12)
>>>>> [   19.130430] [  T474] input: Power Button as
>>>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
>>>>> [   19.136861] [  T475] sony_laptop: sony_pic_call1(0x82): 0x0e0a
>>>>> [   19.136899] [    C0] sony_laptop: event ([0e] [05]) at port
>>>>> 0xc000(+0x12)
>>>>> [   19.136905] [    C0] sony_laptop: unknown event ([0e] [05]) at port
>>>>> 0xc000(+0x12)
>>>>> [   19.136927] [  T475] sony_laptop: sony_pic_call2(0x81 - 0xff):
>>>>> 0x000e
>>>>> [   19.136949] [    C0] sony_laptop: event ([00] [05]) at port
>>>>> 0xc000(+0x12)
>>>>> [   19.136961] [  T475] sony_laptop: sony_pic_call1(0x82): 0x000b
>>>>> [   19.136988] [    C0] sony_laptop: event ([0e] [05]) at port
>>>>> 0xc000(+0x12)
>>>>> [   19.136993] [    C0] sony_laptop: unknown event ([0e] [05]) at port
>>>>> 0xc000(+0x12)
>>>>> [   19.137161] [  T475] sony_laptop: SPIC setup done.
>>>>> [   19.137261] [  T475] sony_laptop: method: name: GBRT, args 0
>>>>> [   19.137268] [  T475] sony_laptop: method: name: SBRT, args 1
>>>>> [   19.137272] [  T475] sony_laptop: method: name: GPBR, args 0
>>>>> [   19.137276] [  T475] sony_laptop: method: name: SPBR, args 1
>>>>> [   19.137281] [  T475] sony_laptop: method: name: PWAK, args 0
>>>>> [   19.137285] [  T475] sony_laptop: method: name: PWRN, args 0
>>>>> [   19.137289] [  T475] sony_laptop: method: name: CSXB, args 1
>>>>> [   19.137293] [  T475] sony_laptop: method: name: GWDP, args 0
>>>>> [   19.137298] [  T475] sony_laptop: method: name: SLRS, args 1
>>>>> [   19.137302] [  T475] sony_laptop: method: name: RBMF, args 1
>>>>> [   19.137306] [  T475] sony_laptop: method: name: RSBI, args 1
>>>>> [   19.137310] [  T475] sony_laptop: method: name: CBMF, args 1
>>>>> [   19.137314] [  T475] sony_laptop: method: name: LNPW, args 1
>>>>> [   19.137319] [  T475] sony_laptop: method: name: GLNP, args 0
>>>>> [   19.137323] [  T475] sony_laptop: method: name: SCAM, args 1
>>>>> [   19.137327] [  T475] sony_laptop: method: name: GCAM, args 0
>>>>> [   19.137340] [  T475] sony_laptop: Found brightness_default getter:
>>>>> GPBR
>>>>> [   19.137388] [  T475] sony_laptop: Found brightness_default setter:
>>>>> SPBR
>>>>> [   19.137402] [  T475] sony_laptop: Found lanpower getter: GLNP
>>>>> [   19.137406] [  T475] sony_laptop: Found lanpower setter: LNPW
>>>>> [   19.137423] [  T475] sony_laptop: SNC setup done.
>>>>>
>>>>>
>>>>> and the 3 buttons zoomin, zoom out, the third one
>>>>> [  161.975552] [    C0] sony_laptop: event ([5c] [31]) at port
>>>>> 0xc000(+0x12)
>>>>> [  161.975596] [    C0] sony_laptop: sony_pic_call1(0xa0): 0x5c0a
>>>>> [  161.975681] [    C0] sony_laptop: event ([10] [05]) at port
>>>>> 0xc000(+0x12)
>>>>
>>>> Zoom in
>>>>
>>>>> [ 162.154768] [    C0] sony_laptop: event ([5c] [31]) at port
>>>>> 0xc000(+0x12)
>>>>> [  162.154814] [    C0] sony_laptop: sony_pic_call1(0xa0): 0x5c0a
>>>>> [  162.154880] [    C0] sony_laptop: event ([00] [05]) at port
>>>>> 0xc000(+0x12)
>>>>
>>>> Ignored
>>>>
>>>>> [ 163.327457] [    C0] sony_laptop: event ([5c] [31]) at port
>>>>> 0xc000(+0x12)
>>>>> [  163.327511] [    C0] sony_laptop: sony_pic_call1(0xa0): 0x5c0a
>>>>> [  163.327563] [    C0] sony_laptop: event ([20] [05]) at port
>>>>> 0xc000(+0x12)
>>>>
>>>> Zoom out
>>>>
>>>>> [ 163.516819] [    C0] sony_laptop: event ([5c] [31]) at port
>>>>> 0xc000(+0x12)
>>>>> [  163.516856] [    C0] sony_laptop: sony_pic_call1(0xa0): 0x5c0a
>>>>> [  163.517008] [    C0] sony_laptop: event ([00] [05]) at port
>>>>> 0xc000(+0x12)
>>>>
>>>> ignored
>>>>
>>>>> [ 165.206657] [    C0] sony_laptop: event ([5c] [31]) at port
>>>>> 0xc000(+0x12)
>>>>> [  165.206700] [    C0] sony_laptop: sony_pic_call1(0xa0): 0x5c0a
>>>>> [  165.206805] [    C0] sony_laptop: event ([01] [05]) at port
>>>>> 0xc000(+0x12)
>>>>
>>>> Prog 1
>>>>
>>>>> [ 165.365447] [    C0] sony_laptop: event ([5c] [31]) at port
>>>>> 0xc000(+0x12)
>>>>> [  165.365491] [    C0] sony_laptop: sony_pic_call1(0xa0): 0x5c0a
>>>>> [  165.365548] [    C0] sony_laptop: event ([00] [05]) at port
>>>>> 0xc000(+0x12)
>>>>>
>>>> ignored
>>>>
>>>>> Sorry i messed up and didn't use reply all, Im still quite new to this
>>>>>
>>>> That ok, mistakes happen :)
>>>>
>>>> I think the reason for you problem with the zoom-out key is that
>>>> when sony-laptop
>>>> iterates through the list of possible key responses, it first
>>>> matches the definition
>>>> for SONYPI_EVENT_PKEY_P1 (0x20), which has the same key data as
>>>> SONYPI_EVENT_ZOOM_OUT_PRESSED (also 0x20).
>>>>
>>>> This causes SONYPI_EVENT_PKEY_P1 to be picked instead of
>>>> SONYPI_EVENT_ZOOM_OUT_PRESSED.
>>>
>>> That's right. The event mask is the same for programmable and zoom keys,
>>> thus the conflict.
>>>
>>> { 0x05, SONYPI_PKEY_MASK, sonypi_pkeyev },
>>> { 0x05, SONYPI_ZOOM_MASK, sonypi_zoomev },
>>>
>>>> I am sending this mail to the maintainer of the sony-laptop driver,
>>>> maybe he can help us in this case.
>>>
>>> Heh... I actually have a UX ultra portable laptop somewhere (a UX50
>>> IIRC) but I'm not sure it'll even turn on. Those things are like 15~20
>>> years old now.
>>>
>>> I don't quite remember the idiosyncrasies of this particular model v/s
>>> other models to be quite frank. On the other hand the module has a
>>> 'mask' option that you can use to allow-list only certain sets of
>>> events.
>>> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/platform/x86/sony-laptop.c?h=v6.9.5#n94
>>>
>>> (I'm glad the help text says "see doc" because I don't see this option
>>> mentioned in the doc...)
>>>
>>> The bitmasks are here:
>>> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/platform/x86/sony-laptop.c?h=v6.9.5#n3365
>>>
>>>
>> Thanks for response but I'm bit confused now, since they have same
>> event, and i only allow the zoom in/out keys, won't I lose the third
>> key? Am I missing something?
>>
> When using the "mask" module param, you will lose the third key.
> 
> I think the underlying issue could be that support for the problematic 
> 0x20 SONYPI_EVENT_PKEY_P1 was
> added in commit 1cae71032183 ("sony-laptop: VGN-A317M hotkey support"), 
> while support for you VIAO model
> was added in commit 3eb8749a3799 ("sony-laptop: add Type4 model").
> 
> Commit 1cae71032183 was added after commit 3eb8749a3799, so i think it 
> will be enough to introduce a
> separate copy of sonypi_pkeyev[] without the conflicting 0x20 
> SONYPI_EVENT_PKEY_P1 definition.
> This separate copy can then be used by the type3_events[] definition 
> (which is used on you model).
> 
> If the maintainer agrees with this approach, i can create a patch for 
> you to test. Are you able to
> compile kernel modules on your device?
> 
> Thanks,
> Armin Wolf
> 
I am using opensuse on the device, I can just add patch in the obs so 
yeah rebuilding kernel is no issue, I could do the patch myself but I 
don't know how to make it device-specific.

Thanks for help!

  reply	other threads:[~2024-06-18 13:08 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-14 15:06 [sony-laptop] Hardware keys are not properly mapped on Sony VAIO UX VGN-UX390N Michał Szczepaniak
2024-06-16 18:18 ` Armin Wolf
2024-06-16 20:34   ` Michał Szczepaniak
2024-06-16 22:48     ` Armin Wolf
2024-06-18  1:24       ` Mattia Dongili
2024-06-18  7:09         ` Michał Szczepaniak
2024-06-18 11:47           ` Armin Wolf
2024-06-18 13:08             ` Michał Szczepaniak [this message]
2024-06-18 21:18               ` Armin Wolf
2024-06-19  0:08                 ` Michał Szczepaniak
2024-06-19  7:54                 ` Mattia Dongili
2024-06-19  8:00                   ` Michał Szczepaniak
2024-06-19  8:16                     ` Mattia Dongili
2024-06-19 12:02                       ` Armin Wolf
2024-06-29 20:07                         ` Armin Wolf
2024-07-02 12:12                           ` Mattia Dongili

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bb8ddd94-53e7-4824-94c6-f2ebff7d93ea@gmail.com \
    --to=m.szczepaniak.000@gmail.com \
    --cc=W_Armin@gmx.de \
    --cc=malattia@linux.it \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox