From: Hans de Goede <hdegoede@redhat.com>
To: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>, markgross@kernel.org
Cc: Sanket.Goswami@amd.com, mario.limonciello@amd.com,
platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH v2 1/2] platform/x86/amd: pmc: Get STB DRAM size from PMFW
Date: Mon, 17 Apr 2023 11:31:26 +0200 [thread overview]
Message-ID: <bedeca01-2e1c-65a5-dc88-56ca678ef569@redhat.com> (raw)
In-Reply-To: <20230412102156.2592318-1-Shyam-sundar.S-k@amd.com>
Hi Shyam,
On 4/12/23 12:21, Shyam Sundar S K wrote:
> Recent PMFW's have support for querying the STB DRAM size. Add this
> support to the driver.
>
> Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
> Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Please prepare a new version of this series addressing
Ilpo's review remarks.
Regards,
Hans
> ---
> v2:
> - Based on review-hans branch
> - Add a switch for cpu-id check based on feedback from Mario.
>
> drivers/platform/x86/amd/pmc.c | 32 +++++++++++++++++++++++++++++++-
> 1 file changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/x86/amd/pmc.c b/drivers/platform/x86/amd/pmc.c
> index 877b629e5cae..9f8bc6711413 100644
> --- a/drivers/platform/x86/amd/pmc.c
> +++ b/drivers/platform/x86/amd/pmc.c
> @@ -114,6 +114,7 @@ enum s2d_arg {
> S2D_PHYS_ADDR_LOW,
> S2D_PHYS_ADDR_HIGH,
> S2D_NUM_SAMPLES,
> + S2D_DRAM_SIZE,
> };
>
> struct amd_pmc_bit_map {
> @@ -146,6 +147,7 @@ struct amd_pmc_dev {
> u32 base_addr;
> u32 cpu_id;
> u32 active_ips;
> + u32 dram_size;
> /* SMU version information */
> u8 smu_program;
> u8 major;
> @@ -888,11 +890,34 @@ static const struct pci_device_id pmc_pci_ids[] = {
> { }
> };
>
> +static int amd_pmc_get_dram_size(struct amd_pmc_dev *dev)
> +{
> + switch (dev->cpu_id) {
> + case AMD_CPU_ID_YC:
> + if (!(dev->major > 90 || (dev->major == 90 && dev->minor > 39)))
> + goto err_dram_size;
> + break;
> + default:
> + goto err_dram_size;
> + }
> +
> + amd_pmc_send_cmd(dev, S2D_DRAM_SIZE, &dev->dram_size, STB_SPILL_TO_DRAM, 1);
> + if (!dev->dram_size)
> + goto err_dram_size;
> +
> + return 0;
> +
> +err_dram_size:
> + dev_err(dev->dev, "DRAM size command not supported for this platform\n");
> + return -EINVAL;
> +}
> +
> static int amd_pmc_s2d_init(struct amd_pmc_dev *dev)
> {
> u32 phys_addr_low, phys_addr_hi;
> u64 stb_phys_addr;
> u32 size = 0;
> + int ret;
>
> /* Spill to DRAM feature uses separate SMU message port */
> dev->msg_port = 1;
> @@ -901,6 +926,11 @@ static int amd_pmc_s2d_init(struct amd_pmc_dev *dev)
> if (size != S2D_TELEMETRY_BYTES_MAX)
> return -EIO;
>
> + /* Get DRAM size */
> + ret = amd_pmc_get_dram_size(dev);
> + if (ret)
> + dev->dram_size = S2D_TELEMETRY_DRAMBYTES_MAX;
> +
> /* Get STB DRAM address */
> amd_pmc_send_cmd(dev, S2D_PHYS_ADDR_LOW, &phys_addr_low, STB_SPILL_TO_DRAM, 1);
> amd_pmc_send_cmd(dev, S2D_PHYS_ADDR_HIGH, &phys_addr_hi, STB_SPILL_TO_DRAM, 1);
> @@ -910,7 +940,7 @@ static int amd_pmc_s2d_init(struct amd_pmc_dev *dev)
> /* Clear msg_port for other SMU operation */
> dev->msg_port = 0;
>
> - dev->stb_virt_addr = devm_ioremap(dev->dev, stb_phys_addr, S2D_TELEMETRY_DRAMBYTES_MAX);
> + dev->stb_virt_addr = devm_ioremap(dev->dev, stb_phys_addr, dev->dram_size);
> if (!dev->stb_virt_addr)
> return -ENOMEM;
>
prev parent reply other threads:[~2023-04-17 9:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-12 10:21 [PATCH v2 1/2] platform/x86/amd: pmc: Get STB DRAM size from PMFW Shyam Sundar S K
2023-04-12 10:21 ` [PATCH v2 2/2] platform/x86/amd: pmc: update metrics table info for Pink Sardine Shyam Sundar S K
2023-04-12 11:03 ` Ilpo Järvinen
2023-04-12 10:46 ` [PATCH v2 1/2] platform/x86/amd: pmc: Get STB DRAM size from PMFW Ilpo Järvinen
2023-04-17 9:31 ` Hans de Goede [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bedeca01-2e1c-65a5-dc88-56ca678ef569@redhat.com \
--to=hdegoede@redhat.com \
--cc=Sanket.Goswami@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=mario.limonciello@amd.com \
--cc=markgross@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).