From: bugzilla-daemon@kernel.org
To: platform-driver-x86@vger.kernel.org
Subject: [Bug 203191] The fan speed reports to 65535, despite the fan is stopped
Date: Mon, 04 Dec 2023 00:52:01 +0000 [thread overview]
Message-ID: <bug-203191-215701-W4kMYGJUvk@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-203191-215701@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=203191
--- Comment #18 from antony.gelberg@gmail.com ---
Apologies for the "spam". I noticed I have a `sensors` output before and after
the issue, and there are some other differences.
1. GPU went from reporting a temperature to N/A.
2. ucsi_source_psy_USBC000:002-isa-0000 went from reporting a voltage to zero.
Could this be related? Could it indicate a more widespread failure e.g.
motherboard fault than "just" the fan? Where would be a good place to get
further community insight before shipping it off for repair and waiting for the
possible "there is no hardware fault"?
Before:
$ sensors [156/156]
thinkpad-isa-0000
Adapter: ISA adapter
fan1: 4815 RPM
CPU: +51.0°C
GPU: +50.0°C
temp3: +33.0°C
temp4: +0.0°C
temp5: +42.0°C
temp6: +51.0°C
temp7: +51.0°C
temp8: N/A
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +54.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +54.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +52.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +51.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +48.0°C (high = +100.0°C, crit = +100.0°C)
ucsi_source_psy_USBC000:001-isa-0000
Adapter: ISA adapter
in0: 0.00 V (min = +0.00 V, max = +0.00 V)
curr1: 0.00 A (max = +0.00 A)
BAT0-acpi-0
Adapter: ACPI interface
in0: 12.91 V
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: +58.0°C
ucsi_source_psy_USBC000:002-isa-0000
Adapter: ISA adapter
in0: 5.00 V (min = +5.00 V, max = +20.00 V)
curr1: 3.00 A (max = +3.25 A)
nvme-pci-0400
Adapter: PCI adapter
Composite: +37.9°C (low = -0.1°C, high = +79.8°C)
(crit = +82.8°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +51.0°C (crit = +128.0°C)
After:
$ sensors
thinkpad-isa-0000
Adapter: ISA adapter
fan1: 65535 RPM
CPU: +47.0°C
GPU: N/A
temp3: +34.0°C
temp4: +0.0°C
temp5: +42.0°C
temp6: +47.0°C
temp7: +47.0°C
temp8: N/A
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +47.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +46.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +46.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +46.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +45.0°C (high = +100.0°C, crit = +100.0°C)
ucsi_source_psy_USBC000:001-isa-0000
Adapter: ISA adapter
in0: 0.00 V (min = +0.00 V, max = +0.00 V)
curr1: 0.00 A (max = +0.00 A)
BAT0-acpi-0
Adapter: ACPI interface
in0: 12.08 V
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: +44.0°C
ucsi_source_psy_USBC000:002-isa-0000
Adapter: ISA adapter
in0: 0.00 V (min = +0.00 V, max = +0.00 V)
curr1: 0.00 A (max = +0.00 A)
nvme-pci-0400
Adapter: PCI adapter
Composite: +32.9°C (low = -0.1°C, high = +79.8°C)
(crit = +82.8°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +47.0°C (crit = +128.0°C)
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are watching the assignee of the bug.
next prev parent reply other threads:[~2023-12-04 0:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-203191-215701@https.bugzilla.kernel.org/>
2021-03-18 16:39 ` [Bug 203191] The fan speed reports to 65535, despite the fan is stopped bugzilla-daemon
2022-09-26 11:42 ` bugzilla-daemon
2022-10-24 14:49 ` bugzilla-daemon
2022-10-24 15:16 ` bugzilla-daemon
2023-03-29 22:19 ` bugzilla-daemon
2023-04-17 20:41 ` bugzilla-daemon
2023-11-22 12:02 ` bugzilla-daemon
2023-11-22 12:33 ` bugzilla-daemon
2023-12-04 0:41 ` bugzilla-daemon
2023-12-04 0:52 ` bugzilla-daemon [this message]
2023-12-04 1:03 ` bugzilla-daemon
2024-01-04 13:47 ` bugzilla-daemon
2025-12-22 9:55 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-203191-215701-W4kMYGJUvk@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox