[Bug 221441] asus-wmi/asus-armoury warnings on ASUS FX608LP: no matching power limits, fan_curve_get_factory_default failed

[bugzilla-daemon@kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=221441

--- Comment #1 from fxzxaxon@outlook.com ---
Additional information: I also noticed several firmware thermal zones failing
to report temperature and being disabled on the same boot.

Relevant kernel log:

  thermal_sys: Registered thermal governor 'fair_share'
  thermal_sys: Registered thermal governor 'bang_bang'
  thermal_sys: Registered thermal governor 'step_wise'
  thermal_sys: Registered thermal governor 'user_space'
  thermal LNXTHERM:00: registered as thermal_zone0
  ACPI: thermal: Thermal Zone [TZ00] (28 C)
  thermal thermal_zone2: Temperature check failed (-5)
  thermal thermal_zone4: Temperature check failed (-5)
  thermal thermal_zone5: Temperature check failed (-5)
  asus-nb-wmi asus-nb-wmi: Using throttle_thermal_policy for platform_profile
support
  proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
  Consider using thermal netlink events interface
  thermal thermal_zone5: Unable to get temperature, disabling!
  thermal thermal_zone5: Disabled thermal zone with critical trip point
  thermal thermal_zone4: Unable to get temperature, disabling!
  thermal thermal_zone4: Disabled thermal zone with critical trip point
  thermal thermal_zone2: Unable to get temperature, disabling!
  thermal thermal_zone2: Disabled thermal zone with critical trip point

/sys/class/thermal summary:

  thermal_zone2:
    type: SEN2
    temp: unreadable
    mode: disabled
    trips:
      passive: -274000
      passive: -274000
      critical: 80050
      hot: 75050
      passive: 65050
      active: 60050
      active: 50050
      active: 40050

  thermal_zone3:
    type: SEN3
    temp: 45050
    mode: enabled
    trips:
      passive: -274000
      passive: -274000
      critical: 80050
      hot: 75050
      passive: 65050
      active: 60050
      active: 50050
      active: 40050

  thermal_zone4:
    type: SEN4
    temp: unreadable
    mode: disabled
    trips:
      passive: -274000
      passive: -274000
      critical: 80050
      hot: 75050
      passive: 65050
      active: 60050
      active: 50050
      active: 40050

  thermal_zone5:
    type: SEN5
    temp: unreadable
    mode: disabled
    trips:
      passive: -274000
      passive: -274000
      critical: 80050
      hot: 75050
      passive: 65050
      active: 60050
      active: 50050
      active: 40050

SEN3 appears to work and reports temperature, while SEN2/SEN4/SEN5 have the
same trip layout but fail to report temperature and are later disabled.

I am not sure whether this is related to the ASUS WMI / Armoury warnings, but I
am adding it here because the same boot also reports:

  asus-nb-wmi asus-nb-wmi: Using throttle_thermal_policy for platform_profile
support

No clear user-visible malfunction has been observed so far.

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.