[Bug 221569] Laptop fan too loud (spinning nearly always) hp-wmi 7.1-rc4 kerenel

[bugzilla-daemon@kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=221569

--- Comment #45 from Milan Oravec (moravec@ukf.sk) ---
Hello, when is laptop idle fan stops spinning for a while sometimes. But that
fan trigger point is set very conservatively and fan is spinning nearly always
when not idling. Is there something I can do about it? Thank you!

migo@migo-HP:~$ sudo sensors
[sudo] password for migo: 
hp-isa-0000
Adapter: ISA adapter
fan1:           0 RPM
fan2:           0 RPM
pwm1:             N/A

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +46.4°C  

mt7925_phy0-pci-6200
Adapter: PCI adapter
temp1:        +47.0°C  

nvme-pci-6000
Adapter: PCI adapter
Composite:    +36.9°C  (low  = -273.1°C, high = +81.8°C)
                       (crit = +84.8°C)
Sensor 1:     +36.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +38.9°C  (low  = -273.1°C, high = +65261.8°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +43.0°C  

ucsi_source_psy_USBC000:001-isa-0000
Adapter: ISA adapter
in0:           5.00 V  (min =  +5.00 V, max = +15.00 V)
curr1:         3.00 A  (max =  +5.00 A)

ucsi_source_psy_USBC000:002-isa-0000
Adapter: ISA adapter
in0:           0.00 V  (min =  +0.00 V, max =  +0.00 V)
curr1:         0.00 A  (max =  +0.00 A)

amdgpu-pci-6300
Adapter: PCI adapter
vddgfx:        0.00 V  
vddnb:         0.00 V  
edge:         +44.0°C  
PPT:           4.01 W  (avg =   4.01 W)
sclk:         806 MHz 

BAT0-acpi-0
Adapter: ACPI interface
in0:           8.26 V  
power1:        0.00 W  

acpi_fan-isa-0000
Adapter: ISA adapter
fan1:           0 RPM



migo@migo-HP:~$ sudo sensors
hp-isa-0000
Adapter: ISA adapter
fan1:           0 RPM
fan2:           0 RPM
pwm1:             N/A

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +45.4°C  

mt7925_phy0-pci-6200
Adapter: PCI adapter
temp1:        +47.0°C  

nvme-pci-6000
Adapter: PCI adapter
Composite:    +36.9°C  (low  = -273.1°C, high = +81.8°C)
                       (crit = +84.8°C)
Sensor 1:     +36.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +39.9°C  (low  = -273.1°C, high = +65261.8°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +44.0°C  

ucsi_source_psy_USBC000:001-isa-0000
Adapter: ISA adapter
in0:           5.00 V  (min =  +5.00 V, max = +15.00 V)
curr1:         3.00 A  (max =  +5.00 A)

ucsi_source_psy_USBC000:002-isa-0000
Adapter: ISA adapter
in0:           0.00 V  (min =  +0.00 V, max =  +0.00 V)
curr1:         0.00 A  (max =  +0.00 A)

amdgpu-pci-6300
Adapter: PCI adapter
vddgfx:        0.00 V  
vddnb:         0.00 V  
edge:         +44.0°C  
PPT:           4.07 W  (avg =   4.07 W)
sclk:         973 MHz 

BAT0-acpi-0
Adapter: ACPI interface
in0:           8.26 V  
power1:        0.00 W  

acpi_fan-isa-0000
Adapter: ISA adapter
fan1:        2100 RPM

migo@migo-HP:~$ 

migo@migo-HP:~$ w
 11:05:31 up 2 days, 18 min,  1 user,  load average: 0,27, 0,36, 0,41

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.