From: Mario Limonciello <mario.limonciello@amd.com>
To: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>,
hdegoede@redhat.com, markgross@kernel.org,
ilpo.jarvinen@linux.intel.com, basavaraj.natikar@amd.com,
jikos@kernel.org, benjamin.tissoires@redhat.com
Cc: Patil.Reddy@amd.com, platform-driver-x86@vger.kernel.org,
linux-input@vger.kernel.org
Subject: Re: [PATCH v5 16/17] platform/x86/amd/pmf: Add PMF-AMDSFH interface for HPD
Date: Fri, 17 Nov 2023 12:18:06 -0600 [thread overview]
Message-ID: <fddfbc8a-1848-4c19-93ec-ced5c0f9ca0b@amd.com> (raw)
In-Reply-To: <20231117080747.3643990-17-Shyam-sundar.S-k@amd.com>
On 11/17/2023 02:07, Shyam Sundar S K wrote:
> From: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
>
> AMDSFH has information about the User presence information via the Human
> Presence Detection (HPD) sensor which is part of the AMD sensor fusion hub.
> Add PMF and AMDSFH interface to get this information.
>
> Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
> ---
> drivers/hid/amd-sfh-hid/amd_sfh_common.h | 5 ++
> drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c | 11 +++++
> .../amd-sfh-hid/sfh1_1/amd_sfh_interface.c | 28 +++++++++++
> drivers/platform/x86/amd/pmf/Kconfig | 1 +
> drivers/platform/x86/amd/pmf/spc.c | 22 +++++++++
> include/linux/amd-pmf-io.h | 46 +++++++++++++++++++
> 6 files changed, 113 insertions(+)
> create mode 100644 include/linux/amd-pmf-io.h
>
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_common.h b/drivers/hid/amd-sfh-hid/amd_sfh_common.h
> index 2643bb14fee2..cd57037bf217 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_common.h
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_common.h
> @@ -37,6 +37,10 @@ struct amd_mp2_sensor_info {
> dma_addr_t dma_address;
> };
>
> +struct sfh_dev_status {
> + bool is_hpd_present;
> +};
> +
> struct amd_mp2_dev {
> struct pci_dev *pdev;
> struct amdtp_cl_data *cl_data;
> @@ -47,6 +51,7 @@ struct amd_mp2_dev {
> struct amd_input_data in_data;
> /* mp2 active control status */
> u32 mp2_acs;
> + struct sfh_dev_status dev_en;
> };
>
> struct amd_mp2_ops {
> diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
> index e9c6413af24a..3dc652d41d7d 100644
> --- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
> +++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
> @@ -73,6 +73,12 @@ static int amd_sfh_hid_client_deinit(struct amd_mp2_dev *privdata)
> int i, status;
>
> for (i = 0; i < cl_data->num_hid_devices; i++) {
> + switch (cl_data->sensor_idx[i]) {
> + case HPD_IDX:
> + privdata->dev_en.is_hpd_present = false;
> + break;
> + }
> +
> if (cl_data->sensor_sts[i] == SENSOR_ENABLED) {
> privdata->mp2_ops->stop(privdata, cl_data->sensor_idx[i]);
> status = amd_sfh_wait_for_response
> @@ -178,6 +184,11 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata)
> rc = amdtp_hid_probe(i, cl_data);
> if (rc)
> goto cleanup;
> + switch (cl_data->sensor_idx[i]) {
> + case HPD_IDX:
> + privdata->dev_en.is_hpd_present = true;
> + break;
> + }
> }
> dev_dbg(dev, "sid 0x%x (%s) status 0x%x\n",
> cl_data->sensor_idx[i], get_sensor_name(cl_data->sensor_idx[i]),
> diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c
> index 4f81ef2d4f56..c0f31efe4927 100644
> --- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c
> +++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c
> @@ -7,11 +7,14 @@
> *
> * Author: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
> */
> +#include <linux/amd-pmf-io.h>
> #include <linux/io-64-nonatomic-lo-hi.h>
> #include <linux/iopoll.h>
>
> #include "amd_sfh_interface.h"
>
> +static struct amd_mp2_dev *emp2;
> +
> static int amd_sfh_wait_response(struct amd_mp2_dev *mp2, u8 sid, u32 cmd_id)
> {
> struct sfh_cmd_response cmd_resp;
> @@ -76,4 +79,29 @@ static struct amd_mp2_ops amd_sfh_ops = {
> void sfh_interface_init(struct amd_mp2_dev *mp2)
> {
> mp2->mp2_ops = &amd_sfh_ops;
> + emp2 = mp2;
How about when SFH is destroyed? I think you want to explicitly set
emp2 to NULL;
> +}
> +
> +static int amd_sfh_hpd_info(u8 *user_present)
> +{
> + struct hpd_status hpdstatus;
> +
> + if (!emp2 || !emp2->dev_en.is_hpd_present)
> + return -ENODEV;
> +
> + hpdstatus.val = readl(emp2->mmio + AMD_C2P_MSG(4));
> + *user_present = hpdstatus.shpd.presence;
> + return 0;
> +}
> +
> +int amd_get_sfh_info(struct amd_sfh_info *sfh_info, enum sfh_message_type op)
> +{
> + if (sfh_info) {
> + switch (op) {
> + case MT_HPD:
> + return amd_sfh_hpd_info(&sfh_info->user_present);
> + }
> + }
> + return -EINVAL;
> }
> +EXPORT_SYMBOL_GPL(amd_get_sfh_info);
> diff --git a/drivers/platform/x86/amd/pmf/Kconfig b/drivers/platform/x86/amd/pmf/Kconfig
> index f246252bddd8..f4fa8bd8bda8 100644
> --- a/drivers/platform/x86/amd/pmf/Kconfig
> +++ b/drivers/platform/x86/amd/pmf/Kconfig
> @@ -10,6 +10,7 @@ config AMD_PMF
> depends on AMD_NB
> select ACPI_PLATFORM_PROFILE
> depends on TEE && AMDTEE
> + depends on AMD_SFH_HID
> help
> This driver provides support for the AMD Platform Management Framework.
> The goal is to enhance end user experience by making AMD PCs smarter,
> diff --git a/drivers/platform/x86/amd/pmf/spc.c b/drivers/platform/x86/amd/pmf/spc.c
> index 47ec563088b8..7f63973ab40e 100644
> --- a/drivers/platform/x86/amd/pmf/spc.c
> +++ b/drivers/platform/x86/amd/pmf/spc.c
> @@ -10,6 +10,7 @@
> */
>
> #include <acpi/button.h>
> +#include <linux/amd-pmf-io.h>
> #include <linux/power_supply.h>
> #include <linux/units.h>
> #include "pmf.h"
> @@ -49,6 +50,7 @@ void amd_pmf_dump_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *
> dev_dbg(dev->dev, "Primary Display State: %s\n", in->ev_info.display_state ?
> "Connected" : "disconnected/unknown");
> dev_dbg(dev->dev, "LID State: %s\n", in->ev_info.lid_state ? "close" : "open");
> + dev_dbg(dev->dev, "User Presence: %s\n", in->ev_info.user_present ? "Present" : "Away");
> dev_dbg(dev->dev, "==== TA inputs END ====\n");
> }
> #else
> @@ -185,6 +187,25 @@ static void amd_pmf_get_gpu_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_ta
> in->ev_info.display_state = dev->gfx_data.con_status[0];
> }
>
> +static void amd_pmf_get_sensor_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
> +{
> + struct amd_sfh_info sfh_info;
> +
> + /* get HPD data */
> + amd_get_sfh_info(&sfh_info, MT_HPD);
> + switch (sfh_info.user_present) {
> + case SFH_NOT_DETECTED:
> + in->ev_info.user_present = 0xff; /* assume no sensors connected */
> + break;
> + case SFH_USER_PRESENT:
> + in->ev_info.user_present = 1;
> + break;
> + case SFH_USER_AWAY:
> + in->ev_info.user_present = 0;
> + break;
> + }
> +}
> +
> void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
> {
> /* TA side lid open is 1 and close is 0, hence the ! here */
> @@ -195,4 +216,5 @@ void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_tab
> amd_pmf_get_slider_info(dev, in);
> if (dev->drm_dev)
> amd_pmf_get_gpu_info(dev, in);
> + amd_pmf_get_sensor_info(dev, in);
> }
> diff --git a/include/linux/amd-pmf-io.h b/include/linux/amd-pmf-io.h
> new file mode 100644
> index 000000000000..5b6d29d36922
> --- /dev/null
> +++ b/include/linux/amd-pmf-io.h
> @@ -0,0 +1,46 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * AMD Platform Management Framework Interface
> + *
> + * Copyright (c) 2023, Advanced Micro Devices, Inc.
> + * All Rights Reserved.
> + *
> + * Authors: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> + * Basavaraj Natikar <Basavaraj.Natikar@amd.com>
> + */
> +
> +#ifndef AMD_PMF_IO_H
> +#define AMD_PMF_IO_H
> +
> +#include <linux/types.h>
> +
> +/**
> + * enum sfh_message_type - Query the SFH message type
> + * @MT_HPD: Message ID to know the Human presence info from MP2 FW
> + */
> +enum sfh_message_type {
> + MT_HPD,
> +};
> +
> +/**
> + * enum sfh_hpd_info - Query the Human presence information
> + * @SFH_NOT_DETECTED: Check the HPD connection information from MP2 FW
> + * @SFH_USER_PRESENT: Check if the user is present from HPD sensor
> + * @SFH_USER_AWAY: Check if the user is away from HPD sensor
> + */
> +enum sfh_hpd_info {
> + SFH_NOT_DETECTED,
> + SFH_USER_PRESENT,
> + SFH_USER_AWAY,
> +};
> +
> +/**
> + * struct amd_sfh_info - get HPD sensor info from MP2 FW
> + * @user_present: Populates the user presence information
> + */
> +struct amd_sfh_info {
> + u8 user_present;
> +};
> +
> +int amd_get_sfh_info(struct amd_sfh_info *sfh_info, enum sfh_message_type op);
> +#endif
next prev parent reply other threads:[~2023-11-17 18:18 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-17 8:07 [PATCH v5 00/17] Introduce PMF Smart PC Solution Builder Feature Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 01/17] platform/x86/amd/pmf: Add PMF TEE interface Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 02/17] platform/x86/amd/pmf: Add support for PMF-TA interaction Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 03/17] platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr() Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 04/17] platform/x86/amd/pmf: Add support for PMF Policy Binary Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 05/17] platform/x86/amd/pmf: change amd_pmf_init_features() call sequence Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 06/17] platform/x86/amd/pmf: Add support to get inputs from other subsystems Shyam Sundar S K
2023-11-21 12:02 ` Ilpo Järvinen
2023-11-17 8:07 ` [PATCH v5 07/17] platform/x86/amd/pmf: Add support update p3t limit Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 08/17] platform/x86/amd/pmf: Add support to update system state Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 09/17] platform/x86/amd/pmf: Make source_as_str() as non-static Shyam Sundar S K
2023-11-17 22:52 ` Mario Limonciello
2023-11-17 8:07 ` [PATCH v5 10/17] platform/x86/amd/pmf: Add facility to dump TA inputs Shyam Sundar S K
2023-11-21 12:06 ` Ilpo Järvinen
2023-11-17 8:07 ` [PATCH v5 11/17] platform/x86/amd/pmf: Add capability to sideload of policy binary Shyam Sundar S K
2023-11-21 12:17 ` Ilpo Järvinen
2023-12-01 10:29 ` Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 12/17] platform/x86/amd/pmf: dump policy binary data Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 13/17] platform/x86/amd/pmf: Add PMF-AMDGPU get interface Shyam Sundar S K
2023-11-17 10:48 ` Hans de Goede
2023-11-17 11:08 ` Shyam Sundar S K
2023-11-17 11:31 ` Hans de Goede
2023-11-20 6:42 ` Shyam Sundar S K
2023-11-17 18:13 ` Mario Limonciello
2023-11-20 6:39 ` Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 14/17] platform/x86/amd/pmf: Add PMF-AMDGPU set interface Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 15/17] HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int() Shyam Sundar S K
2023-11-17 8:07 ` [PATCH v5 16/17] platform/x86/amd/pmf: Add PMF-AMDSFH interface for HPD Shyam Sundar S K
2023-11-17 18:18 ` Mario Limonciello [this message]
2023-11-17 8:07 ` [PATCH v5 17/17] platform/x86/amd/pmf: Add PMF-AMDSFH interface for ALS Shyam Sundar S K
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fddfbc8a-1848-4c19-93ec-ced5c0f9ca0b@amd.com \
--to=mario.limonciello@amd.com \
--cc=Patil.Reddy@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=basavaraj.natikar@amd.com \
--cc=benjamin.tissoires@redhat.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox