From: Tom Zanussi <tom.zanussi@intel.com>
To: "poky@yoctoproject.org" <poky@yoctoproject.org>
Subject: [PATCH] meta-crownbay: update README
Date: Fri, 17 Dec 2010 17:23:46 -0600 [thread overview]
Message-ID: <1292628226.2104.506.camel@elmorro> (raw)
Update the crownbay README with information explaining the available
machine configurations.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
---
meta-crownbay/README | 36 +++++++++++++++++++++++++++++++++---
1 files changed, 33 insertions(+), 3 deletions(-)
diff --git a/meta-crownbay/README b/meta-crownbay/README
index f0a710b..be842d6 100644
--- a/meta-crownbay/README
+++ b/meta-crownbay/README
@@ -1,5 +1,27 @@
This README file contains information on building the meta-crownbay
-BSP layer, and booting the images contained in the /binary directory.
+BSP layer using any of the supported machine configurations, and
+booting the images contained in the /binary directory.
+
+The meta-crownbay layer contains support for 2 different machine
+configurations, identical except for the fact that one ('crownbay')
+makes use of the Intel-proprietary EMGD 1.5 graphics driver, and the
+other ('crownbay-noemgd') does not.
+
+The default 'crownbay' configuration requires an extra manual step
+before building in order for the build to complete. Please see
+section II below for details.
+
+The 'crownbay-noemgd' configuration doesn't require any special setup,
+but since it uses generic vesa, the graphics aren't as nice and don't
+perform as well as the 'crownbay', which does make use of the EMGD
+graphics driver.
+
+If you're only interested in booting the images in the /binary
+directory of a BSP tarball you've downloaded, there's nothing special
+to do - the appropriate images (for either normal or -noemgd) are
+already in the /binary directory depending on which BSP tarball you
+downloaded.
+
Please see the corresponding sections below for details.
@@ -7,7 +29,8 @@ Table of Contents
=================
I. Building the meta-crownbay BSP layer
- II. Special notes for building the meta-crownbay BSP layer
+ II. Special notes for building the meta-crownbay BSP layer (with EMGD
+ graphics)
III. Booting the images in /binary
@@ -31,10 +54,16 @@ bblayers.conf e.g.:
yocto/meta-intel/meta-crownbay \
-To enable the crownbay layer, add the crownbay MACHINE to local.conf:
+To enable the crownbay (with EMGD graphics) layer, add the crownbay
+MACHINE to local.conf:
MACHINE ?= "crownbay"
+To enable the crownbay-noemgd layer, add the crownbay-noemgd MACHINE
+to local.conf:
+
+ MACHINE ?= "crownbay-noemgd"
+
You should then be able to build a crownbay image as such:
$ source poky-init-build-env
@@ -46,6 +75,7 @@ that below, in the section 'Booting the images from /binary').
II. Special notes for building the meta-crownbay BSP layer
+ (with EMGD graphics)
==========================================================
The meta-crownbay layer makes use of the proprietary Intel EMGD
--
1.7.0.4
reply other threads:[~2010-12-17 23:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292628226.2104.506.camel@elmorro \
--to=tom.zanussi@intel.com \
--cc=poky@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox