From: Tom Zanussi <tom.zanussi@intel.com>
To: v sailaja <vsailub4u@gmail.com>
Cc: "poky@yoctoproject.org" <poky@yoctoproject.org>
Subject: Re: Problem in linux-yocto kernel 2.6.37 configuration while building with sugarbay machine
Date: Tue, 05 Apr 2011 09:10:04 -0500 [thread overview]
Message-ID: <1302012604.23110.374.camel@elmorro> (raw)
In-Reply-To: <BANLkTi=bhCcOF6Mr3v79s3aZ9Ae=+pKRLA@mail.gmail.com>
On Tue, 2011-04-05 at 03:06 -0700, v sailaja wrote:
>
> Hi,
>
> I am trying to build poky image "piky-image-minimal-live" for
> "sugarbay" machine with linux-yocto kernel 2.6.37 kernel which
> supports the sandy-bridge.
>
> I clone poky source as git clone git://git.pokylinux.org/poky.git
>
> And cloned for meta-intel from
> http://git.pokylinux.org/cgit/cgit.cgi/meta-intel
>
> Also made entries in bblayers.conf as "meta-intel /meta-sugarbay"
>
> My machine is 64bit one.
>
> I made changes in sugarbay.conf, for building "i586" , as follows
>
> TARGET_ARCH = "i586"
> TARGET_CC_ARCH = "-m32"
> #TARGET_CC_ARCH = "-m64"
>
> I tried to build it for both 32 and 64 bit.
>
> I got the common error both time.
>
> Error log:1
>
>
> ---------------------------------------------*********************************************-----------------------------------
> This BSP sets 24 kernel options that are possibly non-hardware
> related.
> The full list can be found in your workspace at:
> /home/sailaja/new-poky/x86_64/
> poky/build/tmp/work/sugarbay-poky-linux/linux-yocto-2.6.37+git1
> +e2cabadc059ad8d91f7e4a023106620d93abd23a_1
> +2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux/meta/cfg/yocto/standard/common-pc-64/sugarbay/specified_non_hdw.cfg
>
> WARNING: There were 103 hardware options requested that do not
> have a corresponding value present in the final ".config"
> file.
> This probably means you aren't getting the config you wanted.
> The full list can be found in your workspace at:
> /home/sailaja/new-poky/x86_64/poky/build/tmp/work/sugarbay-poky-linux/linux-yocto-2.6.37+git1+e2cabadc059ad8d91f7e4a023106620d93abd23a_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux/meta/cfg/yocto/standard/common-pc-64/sugarbay/mismatch.cfg
>
> Waiting a second to make sure you get a chance to see this...
> NOTE: package linux-yocto-2.6.37+git1
> +e2cabadc059ad8d91f7e4a023106620d93abd23a_1
> +2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16: task
> do_kernel_configcheck: Succeeded
> NOTE: Running task 960 of 1998 (ID:
> 857, /home/sailaja/new-poky/poky/meta/recipes-kernel/linux/linux-yocto_git.bb, do_compile)
> NOTE: package linux-yocto-2.6.37+git1
> +e2cabadc059ad8d91f7e4a023106620d93abd23a_1
> +2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16: task do_compile:
> Started
> ERROR:
> '/home/sailaja/new-poky/poky/meta/recipes-kernel/linux/linux-yocto_git.bb' failed
>
>
> | /home/sailaja/new-poky/poky/build/tmp/work/sugarbay-poky-linux/linux-yocto-2.6.37+git1+e2cabadc059ad8d91f7e4a023106620d93abd23a_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux/kernel/bounds.c:1:0: error: code model 'kernel' not supported in the 32 bit mode
> | /home/sailaja/new-poky/poky/build/tmp/work/sugarbay-poky-linux/linux-yocto-2.6.37+git1+e2cabadc059ad8d91f7e4a023106620d93abd23a_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux/kernel/bounds.c:1:0: sorry, unimplemented: 64-bit mode not compiled in
> | make[3]: *** [kernel/bounds.s] Error 1
> | make[2]: *** [prepare0] Error 2
> | make[2]: *** Waiting for unfinished jobs....
> | make[2]: *** [scripts] Error 2
> | make[1]: *** [sub-make] Error 2
> | make: *** [all] Error 2
> | FATAL: oe_runmake failed
> | ERROR: Function 'do_compile' failed
> (see /home/sailaja/new-poky/poky/build/tmp/work/sugarbay-poky-linux/linux-yocto-2.6.37+git1+e2cabadc059ad8d91f7e4a023106620d93abd23a_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/temp/log.do_compile.29452 for further information)
> NOTE: package linux-yocto-2.6.37+git1
> +e2cabadc059ad8d91f7e4a023106620d93abd23a_1
> +2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16: task do_compile: Failed
> ERROR: Task 857
> (/home/sailaja/new-poky/poky/meta/recipes-kernel/linux/linux-yocto_git.bb, do_compile) failed with exit code '1'
> ---------------******************************-------------------
>
> I thought, the reason for this error is
> As My machine is 64 bit one. It is configured for the default
> configurations i.e., it is using the x86_64_defconfig and 64 bit is
> enabled in the .config file.
> This is because of misconfiguration.
>
> I configured my kernel.
>
> My build is done. But I am getting an error while building the rootfs.
>
> Error log:2
>
> ---------------------------------------********************************************-------------------------------------------------
> NOTE: package poky-image-minimal-live-1.0-r0: task do_bootimg: Started
> ERROR:
> '/home/sailaja/new-poky/poky/meta/recipes-core/images/poky-image-minimal-live.bb' failed
> ERROR: Function 'build_boot_bin' failed
> (see /home/sailaja/new-poky/poky/build/tmp/work/snb-poky-linux/poky-image-minimal-live-1.0-r0/temp/log.do_bootimg.32052 for further information)
> ERROR: Logfile of failure stored
> in: /home/sailaja/new-poky/poky/build/tmp/work/snb-poky-linux/poky-image-minimal-live-1.0-r0/temp/log.do_bootimg.32052
> Log data follows:
> | install: cannot stat
> `/home/sailaja/new-poky/poky/build/tmp/sysroots/sugarbay/kernel/bzImage': No such file or directory
> | ERROR: Function 'build_boot_bin' failed
> (see /home/sailaja/new-poky/poky/build/tmp/work/snb-poky-linux/poky-image-minimal-live-1.0-r0/temp/log.do_bootimg.32052 for further information)
> NOTE: package poky-image-minimal-live-1.0-r0: task do_bootimg: Failed
> ERROR: Task 8
> (/home/sailaja/new-poky/poky/meta/recipes-core/images/poky-image-minimal-live.bb, do_bootimg) failed with exit code '1' Error
>
> -------------------------------------------------************************************************------------------------------
>
>
> Why it is happening?
> Please Can anyone help me in finding the solution.
>
I've seen this too with master - bzImage is built ok and exists, but
doesn't get copied or linked to in sysroots and fails.
I would suggest using poky/bernard instead of poky/master. Using
meta-intel/master should still be ok.
FYI, I've put a transcript of a successful build, from git checkout to
image, here:
https://wiki.yoctoproject.org/wiki/Transcript:_from_git_checkout_to_meta-intel_BSP
You should be able to just substitute 'sugarbay' for 'fishriver' to
build for sugarbay...
hth,
Tom
>
>
>
>
>
>
> --
> Thanks & Regards,
> SAI
>
prev parent reply other threads:[~2011-04-05 14:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-31 10:28 Problem in linux-yocto kernel 2.6.37 configuration while building with sugarbay machine v sailaja
2011-03-31 12:37 ` Bruce Ashfield
2011-03-31 12:55 ` v sailaja
2011-03-31 12:58 ` Bruce Ashfield
[not found] ` <AANLkTinWqFSqg8KOy1WVZHEpvqcsraZPna8JUdDLeXqy@mail.gmail.com>
[not found] ` <AANLkTi=z3FRBiLs2iCLLDhU3q6AvnbXiEGbsbNczykMN@mail.gmail.com>
2011-04-01 12:01 ` v sailaja
2011-04-05 10:06 ` v sailaja
2011-04-05 14:10 ` Tom Zanussi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302012604.23110.374.camel@elmorro \
--to=tom.zanussi@intel.com \
--cc=poky@yoctoproject.org \
--cc=vsailub4u@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox