From: Gary Thomas <gary@mlbassoc.com>
To: "Zhang, Jessica" <jessica.zhang@intel.com>
Cc: "poky@yoctoproject.org" <poky@yoctoproject.org>
Subject: Re: FW: Eclipse plugin question
Date: Thu, 02 Dec 2010 15:16:39 -0700 [thread overview]
Message-ID: <4CF81AC7.7040305@mlbassoc.com> (raw)
In-Reply-To: <9AFCD584B0B67B48AE8D8585BE30BA9502086966@orsmsx504.amr.corp.intel.com>
On 12/02/2010 12:40 PM, Zhang, Jessica wrote:
> OK, can you try this to ensure your tcf terminal etc. is behaving...
> 1. Window->Open Perspective->Other->Remote system Explorer
> 2. In the RSE window, you should see local and below it should have the
> remote host/board, there should be "Terminals", can you right click
> "Terminals" and select connect, it'll prompt you to login, after you login,
> in the right pane of IDE, it should open a remote TCF terminal to the board
> and do some thing in the remote terminal, e.g. run your program there, etc.
> 3. Once you've connected, you can also select "Shells"->"Launch Shell", this
> will open a remote shell tab in the IDE and do something there...
>
> Let us know you findings and we'll debug your issue from there.
Interestingly, when I right-click on Terminals, I only have the option
to _disconnect_, not connect.
I went ahead and disconnected, then reconnected. More messages like
before on my host console. No remote TCF terminal. See
http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-connect.png
Then I tried to explicitly open a terminal, no luck either
http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-open-terminal.png
I also tried to open a shell, still no joy
http://www.mlbassoc.com/poky/EclipsePlugin/TCF-after-launch-shell.png
Anything else I can try?
> Gary Thomas wrote:
>> On 11/25/2010 07:13 PM, Ke, Liping wrote:
>>> Seems I use wrong mail list and lost the mail.
>>>
>>> Yes. Indeed we need to document this considering the code will
>>> be finally in the TCF upstream, more users might need it.
>>
>> I've tried these, but still can't run any programs.
>>
>> When I'm in the RSE browser mode, I can talk to the board, view
>> processes, files, etc.
>>
>> However, when I try to run code, it just sits there. I see the
>> attached messages on the host console where I started eclipse. Does
>> this help?
>> I can see on my target machine that my program was downloaded (I told
>> it to go to /tmp/yocto_app), but it just doesn't seem to run via the
>> remote connection.
>>
>> Ideas?
>>
>>>> -----Original Message-----
>>>> From: Ke, Liping
>>>> Sent: Friday, November 26, 2010 9:35 AM
>>>> To: 'Gary Thomas'; Poky
>>>> Subject: RE: [poky] Eclipse plugin question
>>>>
>>>> Hi, Gary
>>>>
>>>> Thanks for the trying. I have seen your screenshot. Just one more
>>>> question. You have set up an connection 192.168.12.177. Can you
>>>> tell us which connection type you are created? If you're creating
>>>> TCF connection(Please fill the properties of your connection, such
>>>> as prompt char [$ or # or>, default is #, it depends on the host
>>>> environment]), yes, you need to have a agent running on your
>>>> target. The details are: For CDT remote debugger, it depends on
>>>> shell/terminal services. If no response back, it will wait for the
>>>> input ( Current tcf shell/terminal service is similar as telnet
>>>> shell/terminal service, so both of them will not exist but wait for
>>>> the new input stream of target, that's why you see the no-response
>>>> problem.).
>>>>
>>>> One validation style is that you switch your eclipse perspective ->
>>>> RSE browser, there, you will see the connection name 192.168.12.177
>>>> you have created. And in that view, you can use RSE browser to view
>>>> your target. If RSE viewer works fine, they your debugger
>>>> connection will just be fine.
>>>>
>>>>
>>>> Paste a screenshot of tcf connection property settings in the
>>>> attachment. At the same time, an agent will be run in the target.
>>>>
>>>> Command.Prompt: $ (in my target machine ubuntu, for normal user, it
>>>> is $. If logged in as root user in target unbuntu, I will change it
>>>> to #. If you are using normal user, please run agent as normal user.
>>>> Otherwise, please run it as $sudo ./agent -Llog)
>>>> Login.Prompt: never change it.
>>>> Login.Required: true (in normal case, we need to login)
>>>> Password.Prompt: never change it.
>>>> Pwd.Required: false If your target permit no password and could be
>>>> directly login, leave it as "false"
>>>>
>>>> Hope above information is useful to you:) Any problem, just let us
>>>> know!
>>>>
>>>> Thanks a lot!
>>>> criping
>>>>
>>>>> -----Original Message-----
>>>>> From: poky-bounces@yoctoproject.org [mailto:poky-
>>>>> bounces@yoctoproject.org] On Behalf Of Gary Thomas
>>>>> Sent: Friday, November 26, 2010 12:12 AM
>>>>> To: Poky
>>>>> Subject: [poky] Eclipse plugin question
>>>>>
>>>>> I have the eclipse plugin working fairly well now - I can build an
>>>>> application, etc. I tried manually downloading the code to my
>>>>> board (I have real hardware, not QEMU) and it runs fine.
>>>>>
>>>>> Next, I wanted to try running/debugging from eclipse. I set up the
>>>>> run configuration and the code was downloaded to the board. The
>>>>> last indication said it was starting the debugger.
>>>>> This window stayed up a long time and then nothing more.
>>>>>
>>>>> Note: I did figure out that I needed tcf-agent running on my board
>>>>> (this is not documented). I also have GDB server on the board.
>>>>>
>>>>> You can see my setup at http://www.mlbassoc.com/poky/eclipse_plugin
>>>>>
>>>>> Thanks for any ideas/pointers
>>>>>
>>>>> --
>>>>> ------------------------------------------------------------
>>>>> Gary Thomas | Consulting for the
>>>>> MLB Associates | Embedded world
>>>>> ------------------------------------------------------------
>>>>> _______________________________________________
>>>>> poky mailing list
>>>>> poky@yoctoproject.org
>>>>> https://lists.yoctoproject.org/listinfo/poky
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
next prev parent reply other threads:[~2010-12-02 22:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <789F9655DD1B8F43B48D77C5D30659732FF051D3@shsmsx501.ccr.corp.intel.com>
2010-12-02 18:26 ` FW: Eclipse plugin question Gary Thomas
2010-12-02 19:40 ` Zhang, Jessica
2010-12-02 22:16 ` Gary Thomas [this message]
2010-12-02 23:32 ` Zhang, Jessica
2010-12-02 23:53 ` Gary Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CF81AC7.7040305@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=jessica.zhang@intel.com \
--cc=poky@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox