Poky Project Discussions
 help / color / mirror / Atom feed
From: Mark Hatle <mark.hatle@windriver.com>
To: Gary Thomas <gary@mlbassoc.com>
Cc: Poky <poky@lists.pokylinux.org>
Subject: Re: eglibc configurability
Date: Mon, 07 Feb 2011 10:29:48 -0600	[thread overview]
Message-ID: <4D501DFC.6020206@windriver.com> (raw)
In-Reply-To: <4D501B82.4080505@mlbassoc.com>

Could you find the related init script and point me to the contents.  I don't
see any initscripts in the eglibc integration.  The only thing I see is a switch
in the locale generation between on target, on host and via QEMU.  I'm wondering
if maybe this is being triggered?

--Mark

On 2/7/11 10:19 AM, Gary Thomas wrote:
> On 02/07/2011 09:06 AM, Richard Purdie wrote:
>> On Mon, 2011-02-07 at 07:44 -0700, Gary Thomas wrote:
>>> I often run small (slow) embedded systems with only a ramdisk
>>> based file system.  When I use Poky for this, one side effect
>>> is that some packages need to be "configured" on bootup, which
>>> in the case of a ramdisk based operation means every time.
>>>
>>> I notice that the eglibc package brings in a couple of these
>>> which are problematic (mostly in how long they take to run)
>>> Looking at meta/conf/distro/include/poky-eglibc.inc:
>>>
>>> LIBC_DEPENDENCIES = "libsegfault \
>>>                        eglibc \
>>>                        eglibc-dbg \
>>>                        eglibc-dev \
>>>                        eglibc-utils \
>>>                        eglibc-thread-db \
>>>                        eglibc-localedata-i18n \
>>>                        eglibc-gconv-ibm850 \
>>>                        eglibc-gconv-cp1252 \
>>>                        eglibc-gconv-iso8859-1 \
>>>                        eglibc-gconv-iso8859-15 \
>>>                        locale-base-en-us \
>>>                        locale-base-en-gb "
>>>
>>> On my OMAP-L138 target, configuring locale-base-* takes
>>> a long time, upwards of 35 seconds each.
>>>
>>> Are multiple locale-base packages really necessary?
>>> How could I best (in the Poky spirit) limit this?  In the
>>> minimum, I'd like to only have one locale, saving at least
>>> 35 seconds of boot time.
>>>
>>> Ideas?  Comments?
>>
>> Shouldn't the cross locale generation be generating the locales at build
>> time meaning the locales shouldn't be generated on the device?
> 
> I'm not sure the details, I just know that it prints these
> messages on boot:
>    Configuring dbus-1.
>     Adding system startup for /etc/init.d/dbus-1.
>    Configuring locale-base-en-gb.
>    Configuring locale-base-en-us.
> 
> The last two are my concern since they take 35 seconds each to run.
> It's a deeply embedded system and does not need multi-locale support
> at any level.
> 
> In any case, my comment was that there doesn't seem to be any way
> to control/configure this at initial build time.  Per the previous
> reply, I don't see how LIMIT_BUILT_LOCALES affects this at all.
> 
> 



  reply	other threads:[~2011-02-07 16:30 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-07 14:44 eglibc configurability Gary Thomas
2011-02-07 15:45 ` Kamble, Nitin A
2011-02-07 15:54   ` Gary Thomas
2011-02-07 16:06 ` Richard Purdie
2011-02-07 16:19   ` Gary Thomas
2011-02-07 16:29     ` Mark Hatle [this message]
2011-02-07 16:54       ` Gary Thomas
2011-02-07 16:57         ` Richard Purdie
2011-02-07 17:04           ` Mark Hatle
2011-02-07 17:57             ` Gary Thomas
2011-02-07 19:09               ` Mark Hatle
2011-02-07 16:55       ` Richard Purdie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D501DFC.6020206@windriver.com \
    --to=mark.hatle@windriver.com \
    --cc=gary@mlbassoc.com \
    --cc=poky@lists.pokylinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox