Poky Project Discussions
 help / color / mirror / Atom feed
From: Darren Hart <dvhart@linux.intel.com>
To: Gary Thomas <gary@mlbassoc.com>
Cc: poky@yoctoproject.org
Subject: Re: [PATCH 1/2] module: build and clean hostprogs for each module
Date: Fri, 04 Mar 2011 12:33:01 -0800	[thread overview]
Message-ID: <4D714C7D.2060300@linux.intel.com> (raw)
In-Reply-To: <4D70D0B9.3020902@mlbassoc.com>

On 03/04/2011 03:44 AM, Gary Thomas wrote:
> On 03/03/2011 09:39 PM, Darren Hart wrote:
>> On 03/03/2011 08:59 AM, Gary Thomas wrote:
>>> On 03/03/2011 09:50 AM, Gary Thomas wrote:
>>>> On 03/02/2011 11:00 AM, Darren Hart wrote:
>>>>> From: Darren Hart<dvhart@linux.intel.com>
>>>>>
>>>>> This fixes [BUGID #241]
>>>>>
>>>>> The kernel hostprogs are built for the host architecture. They should
>>>>> not
>>>>> be deployed with to the target, and they should not be included in an
>>>>> sstate
>>>>> package which might get reused on a host of a different architecture.
>>>>>
>>>>> As we don't build many out-of-tree modules, this patch takes the
>>>>> approach
>>>>> of building the hostprogs as part of the module compile process with a
>>>>> do_compile_prepend() routine in module.bbclass. To ensure the
>>>>> hostprogs
>>>>> don't contaminate the build, they are removed in do_install_append().
>>>>>
>>>>> Signed-off-by: Darren Hart<dvhart@linux.intel.com>
>>>>> CC: Gary Thomas<gary@mlbassoc.com>
>>>>
>>>> Sadly, this doesn't seem to work for me. I don't see any indication in
>>>> run.do_compile that the extra steps were added at all.
>>>>
>>>> Will it matter if my recipe overrides the do_compile() method?
>>>>
>>>
>>> Also, when you tested this, what was your target MACHINE (in particular,
>>> was the target a different architecture than the build host?) I ask
>>> because
>>> I tried to just manually insert the compile_prepend() functions into my
>>> recipe and it ended up trying to build host tools (that's what the fuss
>>> is all about) using the target toolchain.
>>
>> I made some modifications to avoid a Race that RP pointed out (just
>> removed the cleans from the module.bbclass since they weren't
>> necessary anyway). With this, I set my MACHINE to
>> beagleboard and built minimal. You can see from the following that
>> hostprogs were build for the host and the module for the target:
>>
>> dvhart@rage:build-beagleboard$ file
>> ./tmp/work/beagleboard-poky-linux-gnueabi/linux-yocto-2.6.37+git1+e2737075b79e4fc682e41051cf1c0bc47a47d502_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux-beagleboard-standard-build/scripts/basic/fixdep
>>
>>
>> ./tmp/work/beagleboard-poky-linux-gnueabi/linux-yocto-2.6.37+git1+e2737075b79e4fc682e41051cf1c0bc47a47d502_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux-beagleboard-standard-build/scripts/basic/fixdep:
>>
>> ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically
>> linked (uses shared libs), for GNU/Linux 2.6.15, not stripped
>
> Why are you looking in ${KERNEL_SRC}? It may not exist (think rm_work)
> when your module gets built.
>
> The example recipe I have uses ${STAGING_KERNEL_DIR} something like this:
> make -C ${STAGING_KERNEL_DIR} M=src
>

module.bbclass passes KERNEL_SRC=${STAGING_KERNEL_DIR} to the module's 
Makefile.

I don't use STAGING_KERNEL_DIR in the hello-mod Makefile as I wanted the 
Makefile to exemplary of external modules, and not poky specific.


> Also, if you look at the run.do_compile script for your module recipe, is
> there any indication that the compile_prepend() stuff was even added?

I do see the compile_prepend() code prepended to the do_compile code:

         unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
         oe_runmake CC="arm-poky-linux-gnueabi-gcc " 
LD="arm-poky-linux-gnueabi-ld 
--sysroot=/home/dvhart/source/poky.git/build-beagleboard/tmp/sysroots/beagleboard 
" AR="arm-poky-linux-gnueabi-ar " \
                    -C 
/home/dvhart/source/poky.git/build-beagleboard/tmp/sysroots/beagleboard/kernel 
scripts

Hrm.... but looking at that, that's the target compiler... not the host 
compiler... so why on earth did this work.... grumble. Some more 
investigation remains it seems...


 > I don't see it in mine (yes, it inherits module)

Even though there is something up with the script build above, you 
should be seeing it in run.do_compile. Is this recipe something you can 
share? Also, have you tried from a clean build? I ran into various 
(strange) problems because I wasn't cleaning the right 
tasks/recipes/etc. I think your problem is different, but might have a 
similar cause.

--
Darren

>
>>
>> dvhart@rage:build-beagleboard$ file
>> ./tmp/work/beagleboard-poky-linux-gnueabi/hello-world-mod-1.0-r0/package/lib/modules/2.6.37.2-yocto-standard+/extra/hello_world.ko
>>
>> ./tmp/work/beagleboard-poky-linux-gnueabi/hello-world-mod-1.0-r0/package/lib/modules/2.6.37.2-yocto-standard+/extra/hello_world.ko:
>> ELF 32-bit LSB relocatable, ARM, version 1
>> (SYSV), not stripped
>>
>> I'm going to do a beagleboard boot test, but if that works I'll be
>> resending these changes to close BUG 241 as they work on both qemux86
>> and beagleboard using hello-world-mod which
>> uses a very typical out-of-tree kernel module Make setup.
>>
>


-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel


  reply	other threads:[~2011-03-04 20:33 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-02 18:00 [PATCH 1/2] module: build and clean hostprogs for each module Darren Hart
2011-03-03 16:50 ` Gary Thomas
2011-03-03 16:59   ` Gary Thomas
2011-03-04  4:39     ` Darren Hart
2011-03-04 11:44       ` Gary Thomas
2011-03-04 20:33         ` Darren Hart [this message]
2011-03-04 21:31           ` Darren Hart
2011-03-06 16:21             ` Gary Thomas
2011-03-07 22:16               ` Darren Hart
2011-03-04  4:36   ` Darren Hart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D714C7D.2060300@linux.intel.com \
    --to=dvhart@linux.intel.com \
    --cc=gary@mlbassoc.com \
    --cc=poky@yoctoproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox