From: Gary Thomas <gary@mlbassoc.com>
To: Tom Rini <tom_rini@mentor.com>
Cc: poky@yoctoproject.org
Subject: Re: Native vs not
Date: Fri, 11 Mar 2011 10:32:40 -0700 [thread overview]
Message-ID: <4D7A5CB8.8000701@mlbassoc.com> (raw)
In-Reply-To: <4D7A5AFA.7080107@mentor.com>
On 03/11/2011 10:25 AM, Tom Rini wrote:
> On 03/11/2011 10:20 AM, Gary Thomas wrote:
>> On 03/11/2011 10:13 AM, Richard Purdie wrote:
>>> On Fri, 2011-03-11 at 04:34 -0700, Gary Thomas wrote:
>>>> As pointed out in another thread, I'm trying to build a native
>>>> package which sends "I need native" ripples throughout much of
>>>> the Poky infrastructure.
>>>>
>>>> Does having a native version available for any given package incur a
>>>> cost?
>>>> If not, would patches for [all of] the packages I need be acceptable?
>>>>
>>>> So far, nearly all of the affected packages built fine, just adding
>>>> native
>>>> to BBCLASSEXTEND. Many already build nativesdk versions already.
>>>
>>> There is a cost incurred by doing this since it does increase parse time
>>> and this is something user exposed which we do try and keep under
>>> control.
>>>
>>> Having said that, the BBCLASSEXTEND technology has a lot less overhead
>>> than some of the older approaches to native/sdk recipes.
>>
>> As is, I created a separate layer with a bunch of bbappend files that are
>> only
>> BBCLASSEXTEND += " native "
>> I suppose if I never needed them, I could just not enable that layer.
>>
>>>
>>> The main reason I've been against native everywhere is that having
>>> native versions available makes it far too easy for people to add native
>>> dependencies which encourage feature creep without thinking through the
>>> huge additional dependency chains, the extra build time and other
>>> implications. Often there are slightly more difficult but worthwhile
>>> ways we can avoid the native dependency.
>>
>> Such as? I started down this path needing a native tool (which admittedly
>> came from an OE recipe librsvg) which then cascaded into cairo-native and
>> beyond, totally 22 packages!. If I knew of a short circuit for this, I'd
>> certainly entertain it.
>
> Having just skimmed the OE recipes, yeah, there we just build a ton of stuff in librsvg-native. But I would start by looking at what we can pass to configure to disable things as
> part of the host tool build.
>
> Doing some git grep'ing I see there's just a few things in OE that need librsvg-native so perhaps we can build a much more limited native recipe instead and still generate what we
> need to.
What I really needed was rsvg-convert which is used during the build of
midori. In Poky/Yocto, that tool has to come from librsvg-native. OE
seems to be happy leaning on the host version.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
next prev parent reply other threads:[~2011-03-11 17:32 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-11 11:34 Native vs not Gary Thomas
2011-03-11 17:13 ` Richard Purdie
2011-03-11 17:20 ` Gary Thomas
2011-03-11 17:25 ` Tom Rini
2011-03-11 17:32 ` Gary Thomas [this message]
2011-03-12 0:10 ` Khem Raj
2011-03-14 17:26 ` Tom Rini
2011-03-14 17:40 ` Richard Purdie
2011-03-14 17:46 ` Tom Rini
2011-03-14 17:55 ` Richard Purdie
2011-03-14 18:03 ` Tom Rini
2011-03-14 18:26 ` Gary Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D7A5CB8.8000701@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=poky@yoctoproject.org \
--cc=tom_rini@mentor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox