From: Darren Hart <dvhart@linux.intel.com>
To: Salvatore Fassi <salvatore.fassi@gmail.com>
Cc: poky@yoctoproject.org
Subject: Re: Poky issues with tune-cortexa8 and a custom machine
Date: Thu, 07 Apr 2011 12:53:41 -0700 [thread overview]
Message-ID: <4D9E1645.4050500@linux.intel.com> (raw)
In-Reply-To: <BANLkTikROqhGtMmbFA4ZJs+dwDaVpzaKxw@mail.gmail.com>
On 04/06/2011 08:53 AM, Salvatore Fassi wrote:
> Hi all,
>
> I've created a custom machine to match my hardware.
> This hw is arm based with cortexa8 architecture, so my machine file
> (myarm.conf) uses:
>
> require conf/machine/include/tune-cortexa8.inc
>
> For the image I use:
>
> bitbake poky-image-minimal
>
> This compiles everything fine but when it starts composing the rootfs by
> installing ipk's I get errors about some missing packages.
Does this also happen if you use rpms instead of ipks? (Set in
local.conf). Can you post the error you receive?
> I've found that the error is due to the fact that poky is compiling two
> work trees:
>
> build/tmp/work/myarm-poky-linux-gnueabi
>
> and
>
> build/tmp/work/armv7a-poky-linux-gnueabi
This is normal, there are machine packages and architecture packages,
and shouldn't cause a problem with installation.
--
Darren
>
> And the missing ipk's are in the armv7a tree!
>
> I've also noticed that the armv7a "target" definition is inside
> tune-cortexa8.inc...
> So...what am I doing wrong?
>
> Thank you.
>
> best regards
>
> Salvo
>
>
>
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
next prev parent reply other threads:[~2011-04-07 20:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-06 15:53 Poky issues with tune-cortexa8 and a custom machine Salvatore Fassi
2011-04-07 19:53 ` Darren Hart [this message]
2011-04-08 9:53 ` Paul Eggleton
2011-04-08 15:53 ` Salvatore Fassi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D9E1645.4050500@linux.intel.com \
--to=dvhart@linux.intel.com \
--cc=poky@yoctoproject.org \
--cc=salvatore.fassi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox