[PATCH] softfloat: Handle default NaN mode after pickNaNMulAdd, not before

[PATCH] softfloat: Handle default NaN mode after pickNaNMulAdd, not before

[Peter Maydell]

It is implementation defined whether a multiply-add of
(0,inf,qnan) or (inf,0,qnan) raises InvalidaOperation or
not, so we let the target-specific pickNaNMulAdd function
handle this. This means that we must do the "return the
default NaN in default NaN mode" check after the call,
not before. Correct the ordering, and restore the comment
from the old propagateFloat64MulAddNaN() that warned about
this corner case.

This fixes a regression from 2.11 for Arm guests where we would
incorrectly fail to set the Invalid flag for these cases.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 fpu/softfloat.c | 52 ++++++++++++++++++++++++++++---------------------
 1 file changed, 30 insertions(+), 22 deletions(-)

diff --git a/fpu/softfloat.c b/fpu/softfloat.c
index 70e0c40a1c..8401b37bd4 100644
--- a/fpu/softfloat.c
+++ b/fpu/softfloat.c
@@ -602,34 +602,42 @@ static FloatParts pick_nan(FloatParts a, FloatParts b, float_status *s)
 static FloatParts pick_nan_muladd(FloatParts a, FloatParts b, FloatParts c,
                                   bool inf_zero, float_status *s)
 {
+    int which;
+
     if (is_snan(a.cls) || is_snan(b.cls) || is_snan(c.cls)) {
         s->float_exception_flags |= float_flag_invalid;
     }
 
-    if (s->default_nan_mode) {
-        a.cls = float_class_dnan;
-    } else {
-        switch (pickNaNMulAdd(is_qnan(a.cls), is_snan(a.cls),
-                              is_qnan(b.cls), is_snan(b.cls),
-                              is_qnan(c.cls), is_snan(c.cls),
-                              inf_zero, s)) {
-        case 0:
-            break;
-        case 1:
-            a = b;
-            break;
-        case 2:
-            a = c;
-            break;
-        case 3:
-            a.cls = float_class_dnan;
-            return a;
-        default:
-            g_assert_not_reached();
-        }
+    which = pickNaNMulAdd(is_qnan(a.cls), is_snan(a.cls),
+                          is_qnan(b.cls), is_snan(b.cls),
+                          is_qnan(c.cls), is_snan(c.cls),
+                          inf_zero, s);
 
-        a.cls = float_class_msnan;
+    if (s->default_nan_mode) {
+        /* Note that this check is after pickNaNMulAdd so that function
+         * has an opportunity to set the Invalid flag.
+         */
+        a.cls = float_class_dnan;
+        return a;
     }
+
+    switch (which) {
+    case 0:
+        break;
+    case 1:
+        a = b;
+        break;
+    case 2:
+        a = c;
+        break;
+    case 3:
+        a.cls = float_class_dnan;
+        return a;
+    default:
+        g_assert_not_reached();
+    }
+    a.cls = float_class_msnan;
+
     return a;
 }
 
-- 
2.17.0

Re: [Qemu-devel] [PATCH] softfloat: Handle default NaN mode after pickNaNMulAdd, not before

[Richard Henderson]

On 05/04/2018 03:05 AM, Peter Maydell wrote:
> It is implementation defined whether a multiply-add of
> (0,inf,qnan) or (inf,0,qnan) raises InvalidaOperation or
> not, so we let the target-specific pickNaNMulAdd function
> handle this. This means that we must do the "return the
> default NaN in default NaN mode" check after the call,
> not before. Correct the ordering, and restore the comment
> from the old propagateFloat64MulAddNaN() that warned about
> this corner case.
> 
> This fixes a regression from 2.11 for Arm guests where we would
> incorrectly fail to set the Invalid flag for these cases.
> 
> Cc: qemu-stable@nongnu.org
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
>  fpu/softfloat.c | 52 ++++++++++++++++++++++++++++---------------------
>  1 file changed, 30 insertions(+), 22 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>


r~

Re: [PATCH] softfloat: Handle default NaN mode after pickNaNMulAdd, not before

[Alex Bennée]

Peter Maydell <peter.maydell@linaro.org> writes:

> It is implementation defined whether a multiply-add of
> (0,inf,qnan) or (inf,0,qnan) raises InvalidaOperation or
> not, so we let the target-specific pickNaNMulAdd function
> handle this. This means that we must do the "return the
> default NaN in default NaN mode" check after the call,
> not before. Correct the ordering, and restore the comment
> from the old propagateFloat64MulAddNaN() that warned about
> this corner case.
>
> This fixes a regression from 2.11 for Arm guests where we would
> incorrectly fail to set the Invalid flag for these cases.
>
> Cc: qemu-stable@nongnu.org
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>


> ---
>  fpu/softfloat.c | 52 ++++++++++++++++++++++++++++---------------------
>  1 file changed, 30 insertions(+), 22 deletions(-)
>
> diff --git a/fpu/softfloat.c b/fpu/softfloat.c
> index 70e0c40a1c..8401b37bd4 100644
> --- a/fpu/softfloat.c
> +++ b/fpu/softfloat.c
> @@ -602,34 +602,42 @@ static FloatParts pick_nan(FloatParts a, FloatParts b, float_status *s)
>  static FloatParts pick_nan_muladd(FloatParts a, FloatParts b, FloatParts c,
>                                    bool inf_zero, float_status *s)
>  {
> +    int which;
> +
>      if (is_snan(a.cls) || is_snan(b.cls) || is_snan(c.cls)) {
>          s->float_exception_flags |= float_flag_invalid;
>      }
>
> -    if (s->default_nan_mode) {
> -        a.cls = float_class_dnan;
> -    } else {
> -        switch (pickNaNMulAdd(is_qnan(a.cls), is_snan(a.cls),
> -                              is_qnan(b.cls), is_snan(b.cls),
> -                              is_qnan(c.cls), is_snan(c.cls),
> -                              inf_zero, s)) {
> -        case 0:
> -            break;
> -        case 1:
> -            a = b;
> -            break;
> -        case 2:
> -            a = c;
> -            break;
> -        case 3:
> -            a.cls = float_class_dnan;
> -            return a;
> -        default:
> -            g_assert_not_reached();
> -        }
> +    which = pickNaNMulAdd(is_qnan(a.cls), is_snan(a.cls),
> +                          is_qnan(b.cls), is_snan(b.cls),
> +                          is_qnan(c.cls), is_snan(c.cls),
> +                          inf_zero, s);
>
> -        a.cls = float_class_msnan;
> +    if (s->default_nan_mode) {
> +        /* Note that this check is after pickNaNMulAdd so that function
> +         * has an opportunity to set the Invalid flag.
> +         */
> +        a.cls = float_class_dnan;
> +        return a;
>      }
> +
> +    switch (which) {
> +    case 0:
> +        break;
> +    case 1:
> +        a = b;
> +        break;
> +    case 2:
> +        a = c;
> +        break;
> +    case 3:
> +        a.cls = float_class_dnan;
> +        return a;
> +    default:
> +        g_assert_not_reached();
> +    }
> +    a.cls = float_class_msnan;
> +
>      return a;
>  }


--
Alex Bennée

Re: [PATCH] softfloat: Handle default NaN mode after pickNaNMulAdd, not before

[Peter Maydell]

On 8 May 2018 at 12:30, Alex Bennée <alex.bennee@linaro.org> wrote:
>
> Peter Maydell <peter.maydell@linaro.org> writes:
>
>> It is implementation defined whether a multiply-add of
>> (0,inf,qnan) or (inf,0,qnan) raises InvalidaOperation or
>> not, so we let the target-specific pickNaNMulAdd function
>> handle this. This means that we must do the "return the
>> default NaN in default NaN mode" check after the call,
>> not before. Correct the ordering, and restore the comment
>> from the old propagateFloat64MulAddNaN() that warned about
>> this corner case.
>>
>> This fixes a regression from 2.11 for Arm guests where we would
>> incorrectly fail to set the Invalid flag for these cases.
>>
>> Cc: qemu-stable@nongnu.org
>> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
>
> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> Tested-by: Alex Bennée <alex.bennee@linaro.org>

Thanks; applied to target-arm.next.

-- PMM