[PATCH v3 04/19] target/arm: Restric the Address Translate operations to TCG accel

["Philippe Mathieu-Daudé" <philmd@redhat.com>]

Under KVM the ATS instruction will trap.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 target/arm/helper.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index 924deffd65..a5280c091b 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -3322,7 +3322,7 @@ static void par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
     }
 }
 
-#ifndef CONFIG_USER_ONLY
+#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG)
 /* get_phys_addr() isn't present for user-mode-only targets */
 
 static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -3631,7 +3631,7 @@ static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri,
 
     env->cp15.par_el[1] = do_ats_write(env, value, access_type, mmu_idx);
 }
-#endif
+#endif /* !CONFIG_USER_ONLY && CONFIG_TCG */
 
 static const ARMCPRegInfo vapa_cp_reginfo[] = {
     { .name = "PAR", .cp = 15, .crn = 7, .crm = 4, .opc1 = 0, .opc2 = 0,
@@ -3639,7 +3639,7 @@ static const ARMCPRegInfo vapa_cp_reginfo[] = {
       .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.par_s),
                              offsetoflow32(CPUARMState, cp15.par_ns) },
       .writefn = par_write },
-#ifndef CONFIG_USER_ONLY
+#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG)
     /* This underdecoding is safe because the reginfo is NO_RAW. */
     { .name = "ATS", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = CP_ANY,
       .access = PL1_W, .accessfn = ats_access,
@@ -4880,7 +4880,8 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 6,
       .access = PL2_W, .type = ARM_CP_NO_RAW,
       .writefn = tlbi_aa64_alle1is_write },
-#ifndef CONFIG_USER_ONLY
+
+#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG)
     /* 64 bit address translation operations */
     { .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 0,
@@ -4929,7 +4930,8 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
       .access = PL1_RW, .resetvalue = 0,
       .fieldoffset = offsetof(CPUARMState, cp15.par_el[1]),
       .writefn = par_write },
-#endif
+#endif /* !CONFIG_USER_ONLY && CONFIG_TCG */
+
     /* TLB invalidate last level of translation table walk */
     { .name = "TLBIMVALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5,
       .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb,
@@ -5536,7 +5538,7 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
       .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5,
       .access = PL2_W, .type = ARM_CP_NO_RAW,
       .writefn = tlbi_aa64_vae2is_write },
-#ifndef CONFIG_USER_ONLY
+#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG)
     /* Unlike the other EL2-related AT operations, these must
      * UNDEF from EL3 if EL2 is not implemented, which is why we
      * define them here rather than with the rest of the AT ops.
@@ -6992,7 +6994,7 @@ static const ARMCPRegInfo vhe_reginfo[] = {
     REGINFO_SENTINEL
 };
 
-#ifndef CONFIG_USER_ONLY
+#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG)
 static const ARMCPRegInfo ats1e1_reginfo[] = {
     { .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64,
       .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0,
@@ -7894,14 +7896,14 @@ void register_cp_regs_for_features(ARMCPU *cpu)
     if (cpu_isar_feature(aa64_pan, cpu)) {
         define_one_arm_cp_reg(cpu, &pan_reginfo);
     }
-#ifndef CONFIG_USER_ONLY
+#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG)
     if (cpu_isar_feature(aa64_ats1e1, cpu)) {
         define_arm_cp_regs(cpu, ats1e1_reginfo);
     }
     if (cpu_isar_feature(aa32_ats1e1, cpu)) {
         define_arm_cp_regs(cpu, ats1cp_reginfo);
     }
-#endif
+#endif /* !CONFIG_USER_ONLY && CONFIG_TCG */
     if (cpu_isar_feature(aa64_uao, cpu)) {
         define_one_arm_cp_reg(cpu, &uao_reginfo);
     }
-- 
2.21.1