[PATCH v6 00/11] Support disabling TCG on ARM (part 2)

[PATCH v6 00/11] Support disabling TCG on ARM (part 2)

[Philippe Mathieu-Daudé]

Cover from Samuel Ortiz from (part 1) [1]:

  This patchset allows for building and running ARM targets with TCG
  disabled. [...]

  The rationale behind this work comes from the NEMU project where
  we're trying to only support x86 and ARM 64-bit architectures,
  without including the TCG code base. We can only do so if we can
  build and run ARM binaries with TCG disabled.

Peter mentioned in v5 [6] that since 32-bit host has been removed,
we have to remove v7 targets. This is not done in this series, as
linking succeeds, and there is enough material to review (no need
to spend time on that extra patch if the current approach is not
accepted).

CI: https://gitlab.com/philmd/qemu/-/pipelines/249272441

v6:
- rebased on "target/arm/Kconfig" series
- introduce/use tcg_builtin() for realview machines

v5:
- addressed Paolo/Richard/Thomas review comments from v4 [5].

v4 almost 2 years later... [2]:
- Rebased on Meson
- Addressed Richard review comments
- Addressed Claudio review comments

v3 almost 18 months later [3]:
- Rebased
- Addressed Thomas review comments
- Added Travis-CI job to keep building --disable-tcg on ARM

v2 [4]:
- Addressed review comments from Richard and Thomas from v1 [1]

Regards,

Phil.

[1]: https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg02451.html
[2]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg689168.html
[3]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg641796.html
[4]: https://lists.gnu.org/archive/html/qemu-devel/2019-08/msg05003.html
[5]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg746041.html
[6]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg777669.html

Based-on: <20210131111316.232778-1-f4bug@amsat.org>
          "target: Provide target-specific Kconfig"

Philippe Mathieu-Daudé (9):
  sysemu/tcg: Introduce tcg_builtin() helper
  exec: Restrict TCG specific headers
  target/arm: Restrict ARMv4 cpus to TCG accel
  target/arm: Restrict ARMv5 cpus to TCG accel
  target/arm: Restrict ARMv6 cpus to TCG accel
  target/arm: Restrict ARMv7 R-profile cpus to TCG accel
  target/arm: Restrict ARMv7 M-profile cpus to TCG accel
  target/arm: Reorder meson.build rules
  .travis.yml: Add a KVM-only Aarch64 job

Samuel Ortiz (1):
  target/arm: Do not build TCG objects when TCG is off

Thomas Huth (1):
  target/arm: Make m_helper.c optional via CONFIG_ARM_V7M

 default-configs/devices/aarch64-softmmu.mak |  1 -
 default-configs/devices/arm-softmmu.mak     | 27 --------
 include/exec/helper-proto.h                 |  2 +
 include/sysemu/tcg.h                        |  2 +
 target/arm/cpu.h                            | 12 ----
 hw/arm/realview.c                           |  7 +-
 target/arm/cpu_tcg.c                        |  4 +-
 target/arm/helper.c                         |  7 --
 target/arm/m_helper-stub.c                  | 73 +++++++++++++++++++++
 tests/qtest/cdrom-test.c                    |  6 +-
 .travis.yml                                 | 32 +++++++++
 hw/arm/Kconfig                              | 38 +++++++++++
 target/arm/Kconfig                          | 17 +++++
 target/arm/meson.build                      | 28 +++++---
 14 files changed, 196 insertions(+), 60 deletions(-)
 create mode 100644 target/arm/m_helper-stub.c

-- 
2.26.2

[PATCH v6 01/11] sysemu/tcg: Introduce tcg_builtin() helper

[Philippe Mathieu-Daudé]

Modules are registered early with type_register_static().

We would like to call tcg_enabled() when registering QOM types,
but tcg_enabled() returns tcg_allowed which is a runtime property
initialized later (See commit 2f181fbd5a9 which introduced the
MachineInitPhase in "hw/qdev-core.h" representing the different
phases of machine initialization and commit 0427b6257e2 which
document the initialization order).

As we are only interested if the TCG accelerator is builtin,
regardless of being enabled, introduce the tcg_builtin() helper.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
Cc: Markus Armbruster <armbru@redhat.com>
---
 include/sysemu/tcg.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/sysemu/tcg.h b/include/sysemu/tcg.h
index 00349fb18a7..6ac5c2ca89d 100644
--- a/include/sysemu/tcg.h
+++ b/include/sysemu/tcg.h
@@ -13,8 +13,10 @@ void tcg_exec_init(unsigned long tb_size, int splitwx);
 #ifdef CONFIG_TCG
 extern bool tcg_allowed;
 #define tcg_enabled() (tcg_allowed)
+#define tcg_builtin() 1
 #else
 #define tcg_enabled() 0
+#define tcg_builtin() 0
 #endif
 
 #endif
-- 
2.26.2

Re: [PATCH v6 01/11] sysemu/tcg: Introduce tcg_builtin() helper

[Claudio Fontana]

On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> Modules are registered early with type_register_static().
> 
> We would like to call tcg_enabled() when registering QOM types,


Hi Philippe,

could this not be controlled by meson at this stage?
On X86, I register the tcg-specific types in tcg/* in modules that are only built for TCG.

Maybe tcg_builtin() is useful anyway, thinking long term at loadable modules,
but there we are interested in whether tcg code is available or not, regardless of whether it's builtin,
or needs to be loaded via a .so plugin..

maybe tcg_available()?

Ciao,

Claudio

> but tcg_enabled() returns tcg_allowed which is a runtime property
> initialized later (See commit 2f181fbd5a9 which introduced the
> MachineInitPhase in "hw/qdev-core.h" representing the different
> phases of machine initialization and commit 0427b6257e2 which
> document the initialization order).
> 
> As we are only interested if the TCG accelerator is builtin,
> regardless of being enabled, introduce the tcg_builtin() helper.
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> Cc: Markus Armbruster <armbru@redhat.com>
> ---
>  include/sysemu/tcg.h | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/include/sysemu/tcg.h b/include/sysemu/tcg.h
> index 00349fb18a7..6ac5c2ca89d 100644
> --- a/include/sysemu/tcg.h
> +++ b/include/sysemu/tcg.h
> @@ -13,8 +13,10 @@ void tcg_exec_init(unsigned long tb_size, int splitwx);
>  #ifdef CONFIG_TCG
>  extern bool tcg_allowed;
>  #define tcg_enabled() (tcg_allowed)
> +#define tcg_builtin() 1
>  #else
>  #define tcg_enabled() 0
> +#define tcg_builtin() 0
>  #endif
>  
>  #endif
> 

Re: [PATCH v6 01/11] sysemu/tcg: Introduce tcg_builtin() helper

[Philippe Mathieu-Daudé]

On 1/31/21 3:18 PM, Claudio Fontana wrote:
> On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
>> Modules are registered early with type_register_static().
>>
>> We would like to call tcg_enabled() when registering QOM types,
> 
> 
> Hi Philippe,
> 
> could this not be controlled by meson at this stage?
> On X86, I register the tcg-specific types in tcg/* in modules that are only built for TCG.
> 
> Maybe tcg_builtin() is useful anyway, thinking long term at loadable modules,
> but there we are interested in whether tcg code is available or not, regardless of whether it's builtin,
> or needs to be loaded via a .so plugin..
> 
> maybe tcg_available()?

The alternatives I found:

- reorder things in vl.c?

- use ugly #ifdef'ry, see this patch:
  https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg08037.html

- this earlier approach I previously discarded:

-- >8 --
diff --git a/include/qom/object.h b/include/qom/object.h
index d378f13a116..30590c6fac3 100644
--- a/include/qom/object.h
+++ b/include/qom/object.h
@@ -403,9 +403,12 @@ struct Object
  *   parent class initialization has occurred, but before the class itself
  *   is initialized.  This is the function to use to undo the effects of
  *   memcpy from the parent class to the descendants.
- * @class_data: Data to pass to the @class_init,
+ * @class_data: Data to pass to the @class_registerable, @class_init,
  *   @class_base_init. This can be useful when building dynamic
  *   classes.
+ * @registerable: This function is called when modules are registered,
+ *   prior to any class initialization. When present and returning %false,
+ *   the type is not registered, the class is not present (not usable).
  * @interfaces: The list of interfaces associated with this type.  This
  *   should point to a static array that's terminated with a zero filled
  *   element.
@@ -428,6 +431,7 @@ struct TypeInfo
     void (*class_base_init)(ObjectClass *klass, void *data);
     void *class_data;

+    bool (*registerable)(void *data);
     InterfaceInfo *interfaces;
 };

diff --git a/qom/object.c b/qom/object.c
index 2fa0119647c..0febaffa12e 100644
--- a/qom/object.c
+++ b/qom/object.c
@@ -138,6 +138,10 @@ static TypeImpl *type_new(const TypeInfo *info)
 static TypeImpl *type_register_internal(const TypeInfo *info)
 {
     TypeImpl *ti;
+
+    if (info->registerable && !info->registerable(info->class_data)) {
+        return NULL;
+    }
     ti = type_new(info);

     type_table_add(ti);

diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index 990509d3852..1a2b1889da4 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -24,6 +24,7 @@
 #include "hw/loader.h"
 #include "hw/arm/boot.h"
 #include "sysemu/sysemu.h"
+#include "sysemu/tcg.h"
 #include "qom/object.h"

 #define SMPBOOT_ADDR    0x300 /* this should leave enough space for
ATAGS */
@@ -368,18 +369,26 @@ static void raspi3b_machine_class_init(ObjectClass
*oc, void *data)
 };
 #endif /* TARGET_AARCH64 */

+static bool raspi_machine_requiring_tcg_accel(void *data)
+{
+    return tcg_builtin();
+}
+
 static const TypeInfo raspi_machine_types[] = {
     {
         .name           = MACHINE_TYPE_NAME("raspi0"),
         .parent         = TYPE_RASPI_MACHINE,
+        .registerable   = raspi_machine_requiring_tcg_accel,
         .class_init     = raspi0_machine_class_init,
     }, {
         .name           = MACHINE_TYPE_NAME("raspi1ap"),
         .parent         = TYPE_RASPI_MACHINE,
+        .registerable   = raspi_machine_requiring_tcg_accel,
         .class_init     = raspi1ap_machine_class_init,
     }, {
         .name           = MACHINE_TYPE_NAME("raspi2b"),
         .parent         = TYPE_RASPI_MACHINE,
+        .registerable   = raspi_machine_requiring_tcg_accel,
         .class_init     = raspi2b_machine_class_init,
 #ifdef TARGET_AARCH64
     }, {
---

> 
> Ciao,
> 
> Claudio
> 
>> but tcg_enabled() returns tcg_allowed which is a runtime property
>> initialized later (See commit 2f181fbd5a9 which introduced the
>> MachineInitPhase in "hw/qdev-core.h" representing the different
>> phases of machine initialization and commit 0427b6257e2 which
>> document the initialization order).
>>
>> As we are only interested if the TCG accelerator is builtin,
>> regardless of being enabled, introduce the tcg_builtin() helper.
>>
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> ---
>> Cc: Markus Armbruster <armbru@redhat.com>
>> ---
>>  include/sysemu/tcg.h | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/include/sysemu/tcg.h b/include/sysemu/tcg.h
>> index 00349fb18a7..6ac5c2ca89d 100644
>> --- a/include/sysemu/tcg.h
>> +++ b/include/sysemu/tcg.h
>> @@ -13,8 +13,10 @@ void tcg_exec_init(unsigned long tb_size, int splitwx);
>>  #ifdef CONFIG_TCG
>>  extern bool tcg_allowed;
>>  #define tcg_enabled() (tcg_allowed)
>> +#define tcg_builtin() 1
>>  #else
>>  #define tcg_enabled() 0
>> +#define tcg_builtin() 0
>>  #endif
>>  
>>  #endif
>>
> 

Re: [PATCH v6 01/11] sysemu/tcg: Introduce tcg_builtin() helper

[Claudio Fontana]

On 1/31/21 4:23 PM, Philippe Mathieu-Daudé wrote:
> On 1/31/21 3:18 PM, Claudio Fontana wrote:
>> On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
>>> Modules are registered early with type_register_static().
>>>
>>> We would like to call tcg_enabled() when registering QOM types,
>>
>>
>> Hi Philippe,
>>
>> could this not be controlled by meson at this stage?
>> On X86, I register the tcg-specific types in tcg/* in modules that are only built for TCG.
>>
>> Maybe tcg_builtin() is useful anyway, thinking long term at loadable modules,
>> but there we are interested in whether tcg code is available or not, regardless of whether it's builtin,
>> or needs to be loaded via a .so plugin..
>>
>> maybe tcg_available()?
> 
> The alternatives I found:
> 
> - reorder things in vl.c?
> 
> - use ugly #ifdef'ry, see this patch:
>   https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg08037.html

Not sure it's that ugly,
if it is followed (or replaced by) exporting those pieces to separate files, which are only built by meson on CONFIG_TCG.

I did not try to do it, so you know best of course.

Ciao,

Claudio

> 
> - this earlier approach I previously discarded:
> 
> -- >8 --
> diff --git a/include/qom/object.h b/include/qom/object.h
> index d378f13a116..30590c6fac3 100644
> --- a/include/qom/object.h
> +++ b/include/qom/object.h
> @@ -403,9 +403,12 @@ struct Object
>   *   parent class initialization has occurred, but before the class itself
>   *   is initialized.  This is the function to use to undo the effects of
>   *   memcpy from the parent class to the descendants.
> - * @class_data: Data to pass to the @class_init,
> + * @class_data: Data to pass to the @class_registerable, @class_init,
>   *   @class_base_init. This can be useful when building dynamic
>   *   classes.
> + * @registerable: This function is called when modules are registered,
> + *   prior to any class initialization. When present and returning %false,
> + *   the type is not registered, the class is not present (not usable).
>   * @interfaces: The list of interfaces associated with this type.  This
>   *   should point to a static array that's terminated with a zero filled
>   *   element.
> @@ -428,6 +431,7 @@ struct TypeInfo
>      void (*class_base_init)(ObjectClass *klass, void *data);
>      void *class_data;
> 
> +    bool (*registerable)(void *data);
>      InterfaceInfo *interfaces;
>  };
> 
> diff --git a/qom/object.c b/qom/object.c
> index 2fa0119647c..0febaffa12e 100644
> --- a/qom/object.c
> +++ b/qom/object.c
> @@ -138,6 +138,10 @@ static TypeImpl *type_new(const TypeInfo *info)
>  static TypeImpl *type_register_internal(const TypeInfo *info)
>  {
>      TypeImpl *ti;
> +
> +    if (info->registerable && !info->registerable(info->class_data)) {
> +        return NULL;
> +    }
>      ti = type_new(info);
> 
>      type_table_add(ti);
> 
> diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
> index 990509d3852..1a2b1889da4 100644
> --- a/hw/arm/raspi.c
> +++ b/hw/arm/raspi.c
> @@ -24,6 +24,7 @@
>  #include "hw/loader.h"
>  #include "hw/arm/boot.h"
>  #include "sysemu/sysemu.h"
> +#include "sysemu/tcg.h"
>  #include "qom/object.h"
> 
>  #define SMPBOOT_ADDR    0x300 /* this should leave enough space for
> ATAGS */
> @@ -368,18 +369,26 @@ static void raspi3b_machine_class_init(ObjectClass
> *oc, void *data)
>  };
>  #endif /* TARGET_AARCH64 */
> 
> +static bool raspi_machine_requiring_tcg_accel(void *data)
> +{
> +    return tcg_builtin();
> +}
> +
>  static const TypeInfo raspi_machine_types[] = {
>      {
>          .name           = MACHINE_TYPE_NAME("raspi0"),
>          .parent         = TYPE_RASPI_MACHINE,
> +        .registerable   = raspi_machine_requiring_tcg_accel,
>          .class_init     = raspi0_machine_class_init,
>      }, {
>          .name           = MACHINE_TYPE_NAME("raspi1ap"),
>          .parent         = TYPE_RASPI_MACHINE,
> +        .registerable   = raspi_machine_requiring_tcg_accel,
>          .class_init     = raspi1ap_machine_class_init,
>      }, {
>          .name           = MACHINE_TYPE_NAME("raspi2b"),
>          .parent         = TYPE_RASPI_MACHINE,
> +        .registerable   = raspi_machine_requiring_tcg_accel,
>          .class_init     = raspi2b_machine_class_init,
>  #ifdef TARGET_AARCH64
>      }, {
> ---
> 
>>
>> Ciao,
>>
>> Claudio
>>
>>> but tcg_enabled() returns tcg_allowed which is a runtime property
>>> initialized later (See commit 2f181fbd5a9 which introduced the
>>> MachineInitPhase in "hw/qdev-core.h" representing the different
>>> phases of machine initialization and commit 0427b6257e2 which
>>> document the initialization order).
>>>
>>> As we are only interested if the TCG accelerator is builtin,
>>> regardless of being enabled, introduce the tcg_builtin() helper.
>>>
>>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>>> ---
>>> Cc: Markus Armbruster <armbru@redhat.com>
>>> ---
>>>  include/sysemu/tcg.h | 2 ++
>>>  1 file changed, 2 insertions(+)
>>>
>>> diff --git a/include/sysemu/tcg.h b/include/sysemu/tcg.h
>>> index 00349fb18a7..6ac5c2ca89d 100644
>>> --- a/include/sysemu/tcg.h
>>> +++ b/include/sysemu/tcg.h
>>> @@ -13,8 +13,10 @@ void tcg_exec_init(unsigned long tb_size, int splitwx);
>>>  #ifdef CONFIG_TCG
>>>  extern bool tcg_allowed;
>>>  #define tcg_enabled() (tcg_allowed)
>>> +#define tcg_builtin() 1
>>>  #else
>>>  #define tcg_enabled() 0
>>> +#define tcg_builtin() 0
>>>  #endif
>>>  
>>>  #endif
>>>
>>
> 

[PATCH v6 02/11] exec: Restrict TCG specific headers

[Philippe Mathieu-Daudé]

Fixes when building with --disable-tcg on ARM:

  In file included from target/arm/helper.c:16:
  include/exec/helper-proto.h:42:10: fatal error: tcg-runtime.h: No such file or directory
     42 | #include "tcg-runtime.h"
        |          ^~~~~~~~~~~~~~~

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 include/exec/helper-proto.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/exec/helper-proto.h b/include/exec/helper-proto.h
index 659f9298e8f..740bff3bb4d 100644
--- a/include/exec/helper-proto.h
+++ b/include/exec/helper-proto.h
@@ -39,8 +39,10 @@ dh_ctype(ret) HELPER(name) (dh_ctype(t1), dh_ctype(t2), dh_ctype(t3), \
 
 #include "helper.h"
 #include "trace/generated-helpers.h"
+#ifdef CONFIG_TCG
 #include "tcg-runtime.h"
 #include "plugin-helpers.h"
+#endif /* CONFIG_TCG */
 
 #undef IN_HELPER_PROTO
 
-- 
2.26.2

Re: [PATCH v6 02/11] exec: Restrict TCG specific headers

[Claudio Fontana]

On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> Fixes when building with --disable-tcg on ARM:
> 
>   In file included from target/arm/helper.c:16:
>   include/exec/helper-proto.h:42:10: fatal error: tcg-runtime.h: No such file or directory
>      42 | #include "tcg-runtime.h"
>         |          ^~~~~~~~~~~~~~~
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  include/exec/helper-proto.h | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/include/exec/helper-proto.h b/include/exec/helper-proto.h
> index 659f9298e8f..740bff3bb4d 100644
> --- a/include/exec/helper-proto.h
> +++ b/include/exec/helper-proto.h
> @@ -39,8 +39,10 @@ dh_ctype(ret) HELPER(name) (dh_ctype(t1), dh_ctype(t2), dh_ctype(t3), \
>  
>  #include "helper.h"
>  #include "trace/generated-helpers.h"
> +#ifdef CONFIG_TCG
>  #include "tcg-runtime.h"
>  #include "plugin-helpers.h"
> +#endif /* CONFIG_TCG */
>  
>  #undef IN_HELPER_PROTO
>  
> 

Ok, this would go away when applying the refactoring to ARM though right?

Ie the file should not need including at all later on right?

Anyway:

Reviewed-by: Claudio Fontana <cfontana@suse.de>

Re: [PATCH v6 02/11] exec: Restrict TCG specific headers

[Alex Bennée]

Philippe Mathieu-Daudé <f4bug@amsat.org> writes:

> Fixes when building with --disable-tcg on ARM:
>
>   In file included from target/arm/helper.c:16:
>   include/exec/helper-proto.h:42:10: fatal error: tcg-runtime.h: No such file or directory
>      42 | #include "tcg-runtime.h"
>         |          ^~~~~~~~~~~~~~~

I think the problem here is that we have stuff in helper.c which is
needed by non-TCG builds.

>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  include/exec/helper-proto.h | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/include/exec/helper-proto.h b/include/exec/helper-proto.h
> index 659f9298e8f..740bff3bb4d 100644
> --- a/include/exec/helper-proto.h
> +++ b/include/exec/helper-proto.h
> @@ -39,8 +39,10 @@ dh_ctype(ret) HELPER(name) (dh_ctype(t1), dh_ctype(t2), dh_ctype(t3), \
>  
>  #include "helper.h"
>  #include "trace/generated-helpers.h"
> +#ifdef CONFIG_TCG
>  #include "tcg-runtime.h"
>  #include "plugin-helpers.h"
> +#endif /* CONFIG_TCG */

If we are including helper-proto.h then we are defining helpers which
are (should be) TCG only.

>  
>  #undef IN_HELPER_PROTO


-- 
Alex Bennée

[PATCH v6 03/11] target/arm: Restrict ARMv4 cpus to TCG accel

[Philippe Mathieu-Daudé]

KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae84ce:
"target/arm: Remove KVM support for 32-bit Arm hosts").

Only enable the following ARMv4 CPUs when TCG is available:

  - StrongARM (SA1100/1110)
  - OMAP1510 (TI925T)

The following machines are no more built when TCG is disabled:

  - cheetah              Palm Tungsten|E aka. Cheetah PDA (OMAP310)
  - sx1                  Siemens SX1 (OMAP310) V2
  - sx1-v1               Siemens SX1 (OMAP310) V1

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 default-configs/devices/arm-softmmu.mak | 2 --
 hw/arm/Kconfig                          | 4 ++++
 target/arm/Kconfig                      | 4 ++++
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
index 0824e9be795..6ae964c14fd 100644
--- a/default-configs/devices/arm-softmmu.mak
+++ b/default-configs/devices/arm-softmmu.mak
@@ -14,8 +14,6 @@ CONFIG_INTEGRATOR=y
 CONFIG_FSL_IMX31=y
 CONFIG_MUSICPAL=y
 CONFIG_MUSCA=y
-CONFIG_CHEETAH=y
-CONFIG_SX1=y
 CONFIG_NSERIES=y
 CONFIG_STELLARIS=y
 CONFIG_REALVIEW=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index f3ecb73a3d8..f2957b33bee 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -31,6 +31,8 @@ config ARM_VIRT
 
 config CHEETAH
     bool
+    default y if TCG && ARM
+    select ARM_V4
     select OMAP
     select TSC210X
 
@@ -249,6 +251,8 @@ config COLLIE
 
 config SX1
     bool
+    default y if TCG && ARM
+    select ARM_V4
     select OMAP
 
 config VERSATILE
diff --git a/target/arm/Kconfig b/target/arm/Kconfig
index ae89d05c7e5..811e1e81652 100644
--- a/target/arm/Kconfig
+++ b/target/arm/Kconfig
@@ -6,6 +6,10 @@ config AARCH64
     bool
     select ARM
 
+config ARM_V4
+    bool
+    depends on TCG && ARM
+
 config ARM_V7M
     bool
     select PTIMER
-- 
2.26.2

Re: [PATCH v6 03/11] target/arm: Restrict ARMv4 cpus to TCG accel

[Claudio Fontana]

On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> KVM requires the target cpu to be at least ARMv8 architecture
> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
> "target/arm: Remove KVM support for 32-bit Arm hosts").
> 
> Only enable the following ARMv4 CPUs when TCG is available:
> 
>   - StrongARM (SA1100/1110)
>   - OMAP1510 (TI925T)
> 
> The following machines are no more built when TCG is disabled:
> 
>   - cheetah              Palm Tungsten|E aka. Cheetah PDA (OMAP310)
>   - sx1                  Siemens SX1 (OMAP310) V2
>   - sx1-v1               Siemens SX1 (OMAP310) V1
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  default-configs/devices/arm-softmmu.mak | 2 --
>  hw/arm/Kconfig                          | 4 ++++
>  target/arm/Kconfig                      | 4 ++++
>  3 files changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
> index 0824e9be795..6ae964c14fd 100644
> --- a/default-configs/devices/arm-softmmu.mak
> +++ b/default-configs/devices/arm-softmmu.mak
> @@ -14,8 +14,6 @@ CONFIG_INTEGRATOR=y
>  CONFIG_FSL_IMX31=y
>  CONFIG_MUSICPAL=y
>  CONFIG_MUSCA=y
> -CONFIG_CHEETAH=y
> -CONFIG_SX1=y
>  CONFIG_NSERIES=y
>  CONFIG_STELLARIS=y
>  CONFIG_REALVIEW=y
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index f3ecb73a3d8..f2957b33bee 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -31,6 +31,8 @@ config ARM_VIRT
>  
>  config CHEETAH
>      bool
> +    default y if TCG && ARM
> +    select ARM_V4
>      select OMAP
>      select TSC210X
>  
> @@ -249,6 +251,8 @@ config COLLIE
>  
>  config SX1
>      bool
> +    default y if TCG && ARM
> +    select ARM_V4
>      select OMAP
>  
>  config VERSATILE
> diff --git a/target/arm/Kconfig b/target/arm/Kconfig
> index ae89d05c7e5..811e1e81652 100644
> --- a/target/arm/Kconfig
> +++ b/target/arm/Kconfig
> @@ -6,6 +6,10 @@ config AARCH64
>      bool
>      select ARM
>  
> +config ARM_V4
> +    bool
> +    depends on TCG && ARM
> +
>  config ARM_V7M
>      bool
>      select PTIMER
> 

Looks good to me

Acked-by: Claudio Fontana <cfontana@suse.de>

Re: [PATCH v6 03/11] target/arm: Restrict ARMv4 cpus to TCG accel

[Alex Bennée]

Philippe Mathieu-Daudé <f4bug@amsat.org> writes:

> KVM requires the target cpu to be at least ARMv8 architecture
> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
> "target/arm: Remove KVM support for 32-bit Arm hosts").
>
> Only enable the following ARMv4 CPUs when TCG is available:
>
>   - StrongARM (SA1100/1110)
>   - OMAP1510 (TI925T)
>
> The following machines are no more built when TCG is disabled:
>
>   - cheetah              Palm Tungsten|E aka. Cheetah PDA (OMAP310)
>   - sx1                  Siemens SX1 (OMAP310) V2
>   - sx1-v1               Siemens SX1 (OMAP310) V1
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

-- 
Alex Bennée

Re: [PATCH v6 03/11] target/arm: Restrict ARMv4 cpus to TCG accel

[Claudio Fontana]

Hi,

I am trying to take these patches,
in the hope that they help with some of the test issues I am having with the kvm-only build,

but they fail with:

target/arm/Kconfig: does not exist in index

so I guess I need the "target/arm/Kconfig" series right, how can I find that one?

Thanks,

Claudio



On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> KVM requires the target cpu to be at least ARMv8 architecture
> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
> "target/arm: Remove KVM support for 32-bit Arm hosts").
> 
> Only enable the following ARMv4 CPUs when TCG is available:
> 
>   - StrongARM (SA1100/1110)
>   - OMAP1510 (TI925T)
> 
> The following machines are no more built when TCG is disabled:
> 
>   - cheetah              Palm Tungsten|E aka. Cheetah PDA (OMAP310)
>   - sx1                  Siemens SX1 (OMAP310) V2
>   - sx1-v1               Siemens SX1 (OMAP310) V1
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  default-configs/devices/arm-softmmu.mak | 2 --
>  hw/arm/Kconfig                          | 4 ++++
>  target/arm/Kconfig                      | 4 ++++
>  3 files changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
> index 0824e9be795..6ae964c14fd 100644
> --- a/default-configs/devices/arm-softmmu.mak
> +++ b/default-configs/devices/arm-softmmu.mak
> @@ -14,8 +14,6 @@ CONFIG_INTEGRATOR=y
>  CONFIG_FSL_IMX31=y
>  CONFIG_MUSICPAL=y
>  CONFIG_MUSCA=y
> -CONFIG_CHEETAH=y
> -CONFIG_SX1=y
>  CONFIG_NSERIES=y
>  CONFIG_STELLARIS=y
>  CONFIG_REALVIEW=y
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index f3ecb73a3d8..f2957b33bee 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -31,6 +31,8 @@ config ARM_VIRT
>  
>  config CHEETAH
>      bool
> +    default y if TCG && ARM
> +    select ARM_V4
>      select OMAP
>      select TSC210X
>  
> @@ -249,6 +251,8 @@ config COLLIE
>  
>  config SX1
>      bool
> +    default y if TCG && ARM
> +    select ARM_V4
>      select OMAP
>  
>  config VERSATILE
> diff --git a/target/arm/Kconfig b/target/arm/Kconfig
> index ae89d05c7e5..811e1e81652 100644
> --- a/target/arm/Kconfig
> +++ b/target/arm/Kconfig
> @@ -6,6 +6,10 @@ config AARCH64
>      bool
>      select ARM
>  
> +config ARM_V4
> +    bool
> +    depends on TCG && ARM
> +
>  config ARM_V7M
>      bool
>      select PTIMER
> 

Re: [PATCH v6 03/11] target/arm: Restrict ARMv4 cpus to TCG accel

[Philippe Mathieu-Daudé]

On 3/4/21 12:55 PM, Claudio Fontana wrote:
> Hi,
> 
> I am trying to take these patches,
> in the hope that they help with some of the test issues I am having with the kvm-only build,
> 
> but they fail with:
> 
> target/arm/Kconfig: does not exist in index
> 
> so I guess I need the "target/arm/Kconfig" series right, how can I find that one?

See the Based-on in the cover ;)
https://www.mail-archive.com/qemu-block@nongnu.org/msg79924.html

Regards,

Phil.

[PATCH v6 04/11] target/arm: Restrict ARMv5 cpus to TCG accel

[Philippe Mathieu-Daudé]

KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae84ce:
"target/arm: Remove KVM support for 32-bit Arm hosts").

Only enable the following ARMv5 CPUs when TCG is available:

  - ARM926
  - ARM946
  - ARM1026
  - XScale (PXA250/255/260/261/262/270)

The following machines are no more built when TCG is disabled:

  - akita                Sharp SL-C1000 (Akita) PDA (PXA270)
  - ast2500-evb          Aspeed AST2500 EVB (ARM1176)
  - ast2600-evb          Aspeed AST2600 EVB (Cortex A7)
  - borzoi               Sharp SL-C3100 (Borzoi) PDA (PXA270)
  - canon-a1100          Canon PowerShot A1100 IS (ARM946)
  - collie               Sharp SL-5500 (Collie) PDA (SA-1110)
  - connex               Gumstix Connex (PXA255)
  - g220a-bmc            Bytedance G220A BMC (ARM1176)
  - imx25-pdk            ARM i.MX25 PDK board (ARM926)
  - integratorcp         ARM Integrator/CP (ARM926EJ-S)
  - mainstone            Mainstone II (PXA27x)
  - musicpal             Marvell 88w8618 / MusicPal (ARM926EJ-S)
  - palmetto-bmc         OpenPOWER Palmetto BMC (ARM926EJ-S)
  - realview-eb          ARM RealView Emulation Baseboard (ARM926EJ-S)
  - romulus-bmc          OpenPOWER Romulus BMC (ARM1176)
  - sonorapass-bmc       OCP SonoraPass BMC (ARM1176)
  - spitz                Sharp SL-C3000 (Spitz) PDA (PXA270)
  - supermicrox11-bmc    Supermicro X11 BMC (ARM926EJ-S)
  - swift-bmc            OpenPOWER Swift BMC (ARM1176)
  - tacoma-bmc           OpenPOWER Tacoma BMC (Cortex A7)
  - terrier              Sharp SL-C3200 (Terrier) PDA (PXA270)
  - tosa                 Sharp SL-6000 (Tosa) PDA (PXA255)
  - verdex               Gumstix Verdex (PXA270)
  - versatileab          ARM Versatile/AB (ARM926EJ-S)
  - versatilepb          ARM Versatile/PB (ARM926EJ-S)
  - witherspoon-bmc      OpenPOWER Witherspoon BMC (ARM1176)
  - z2                   Zipit Z2 (PXA27x)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 default-configs/devices/arm-softmmu.mak | 12 ------------
 hw/arm/realview.c                       |  5 ++++-
 tests/qtest/cdrom-test.c                |  6 +++++-
 hw/arm/Kconfig                          | 19 +++++++++++++++++++
 target/arm/Kconfig                      |  4 ++++
 5 files changed, 32 insertions(+), 14 deletions(-)

diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
index 6ae964c14fd..0aad35da0c4 100644
--- a/default-configs/devices/arm-softmmu.mak
+++ b/default-configs/devices/arm-softmmu.mak
@@ -10,33 +10,21 @@ CONFIG_ARM_VIRT=y
 CONFIG_CUBIEBOARD=y
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
-CONFIG_INTEGRATOR=y
 CONFIG_FSL_IMX31=y
-CONFIG_MUSICPAL=y
 CONFIG_MUSCA=y
 CONFIG_NSERIES=y
 CONFIG_STELLARIS=y
 CONFIG_REALVIEW=y
-CONFIG_VERSATILE=y
 CONFIG_VEXPRESS=y
 CONFIG_ZYNQ=y
-CONFIG_MAINSTONE=y
-CONFIG_GUMSTIX=y
-CONFIG_SPITZ=y
-CONFIG_TOSA=y
-CONFIG_Z2=y
 CONFIG_NPCM7XX=y
-CONFIG_COLLIE=y
-CONFIG_ASPEED_SOC=y
 CONFIG_NETDUINO2=y
 CONFIG_NETDUINOPLUS2=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
-CONFIG_DIGIC=y
 CONFIG_SABRELITE=y
 CONFIG_EMCRAFT_SF2=y
 CONFIG_MICROBIT=y
-CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
 CONFIG_FSL_IMX6UL=y
 CONFIG_ALLWINNER_H3=y
diff --git a/hw/arm/realview.c b/hw/arm/realview.c
index 0831159d158..2dcf0a4c23e 100644
--- a/hw/arm/realview.c
+++ b/hw/arm/realview.c
@@ -18,6 +18,7 @@
 #include "hw/pci/pci.h"
 #include "net/net.h"
 #include "sysemu/sysemu.h"
+#include "sysemu/tcg.h"
 #include "hw/boards.h"
 #include "hw/i2c/i2c.h"
 #include "exec/address-spaces.h"
@@ -460,7 +461,9 @@ static const TypeInfo realview_pbx_a9_type = {
 
 static void realview_machine_init(void)
 {
-    type_register_static(&realview_eb_type);
+    if (tcg_builtin()) {
+        type_register_static(&realview_eb_type);
+    }
     type_register_static(&realview_eb_mpcore_type);
     type_register_static(&realview_pb_a8_type);
     type_register_static(&realview_pbx_a9_type);
diff --git a/tests/qtest/cdrom-test.c b/tests/qtest/cdrom-test.c
index 5af944a5fb7..1f1bc26fa7a 100644
--- a/tests/qtest/cdrom-test.c
+++ b/tests/qtest/cdrom-test.c
@@ -222,7 +222,11 @@ int main(int argc, char **argv)
         add_cdrom_param_tests(mips64machines);
     } else if (g_str_equal(arch, "arm") || g_str_equal(arch, "aarch64")) {
         const char *armmachines[] = {
-            "realview-eb", "realview-eb-mpcore", "realview-pb-a8",
+#ifdef CONFIG_TCG
+            "realview-eb",
+#endif /* CONFIG_TCG */
+            "realview-eb-mpcore",
+            "realview-pb-a8",
             "realview-pbx-a9", "versatileab", "versatilepb", "vexpress-a15",
             "vexpress-a9", "virt", NULL
         };
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index f2957b33bee..560442bfc5c 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -42,6 +42,8 @@ config CUBIEBOARD
 
 config DIGIC
     bool
+    default y if TCG && ARM
+    select ARM_V5
     select PTIMER
     select PFLASH_CFI02
 
@@ -72,6 +74,8 @@ config HIGHBANK
 
 config INTEGRATOR
     bool
+    default y if TCG && ARM
+    select ARM_V5
     select ARM_TIMER
     select INTEGRATOR_DEBUG
     select PL011 # UART
@@ -84,6 +88,7 @@ config INTEGRATOR
 
 config MAINSTONE
     bool
+    default y if TCG && ARM
     select PXA2XX
     select PFLASH_CFI01
     select SMC91C111
@@ -98,6 +103,8 @@ config MUSCA
 
 config MUSICPAL
     bool
+    default y if TCG && ARM
+    select ARM_V5
     select OR_IRQ
     select BITBANG_I2C
     select MARVELL_88W8618
@@ -138,6 +145,7 @@ config OMAP
 
 config PXA2XX
     bool
+    select ARM_V5
     select FRAMEBUFFER
     select I2C
     select SERIAL
@@ -147,12 +155,14 @@ config PXA2XX
 
 config GUMSTIX
     bool
+    default y if TCG && ARM
     select PFLASH_CFI01
     select SMC91C111
     select PXA2XX
 
 config TOSA
     bool
+    default y if TCG && ARM
     select ZAURUS  # scoop
     select MICRODRIVE
     select PXA2XX
@@ -160,6 +170,7 @@ config TOSA
 
 config SPITZ
     bool
+    default y if TCG && ARM
     select ADS7846 # touch-screen controller
     select MAX111X # A/D converter
     select WM8750  # audio codec
@@ -172,6 +183,7 @@ config SPITZ
 
 config Z2
     bool
+    default y if TCG && ARM
     select PFLASH_CFI01
     select WM8750
     select PL011 # UART
@@ -245,6 +257,7 @@ config STRONGARM
 
 config COLLIE
     bool
+    default y if TCG && ARM
     select PFLASH_CFI01
     select ZAURUS  # scoop
     select STRONGARM
@@ -257,6 +270,8 @@ config SX1
 
 config VERSATILE
     bool
+    default y if TCG && ARM
+    select ARM_V5
     select ARM_TIMER # sp804
     select PFLASH_CFI01
     select LSI_SCSI_PCI
@@ -376,6 +391,8 @@ config NPCM7XX
 
 config FSL_IMX25
     bool
+    default y if TCG && ARM
+    select ARM_V5
     select IMX
     select IMX_FEC
     select IMX_I2C
@@ -402,6 +419,8 @@ config FSL_IMX6
 
 config ASPEED_SOC
     bool
+    default y if TCG && ARM
+    select ARM_V5
     select DS1338
     select FTGMAC100
     select I2C
diff --git a/target/arm/Kconfig b/target/arm/Kconfig
index 811e1e81652..9b3635617dc 100644
--- a/target/arm/Kconfig
+++ b/target/arm/Kconfig
@@ -10,6 +10,10 @@ config ARM_V4
     bool
     depends on TCG && ARM
 
+config ARM_V5
+    bool
+    depends on TCG && ARM
+
 config ARM_V7M
     bool
     select PTIMER
-- 
2.26.2

Re: [PATCH v6 04/11] target/arm: Restrict ARMv5 cpus to TCG accel

[Claudio Fontana]

On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> KVM requires the target cpu to be at least ARMv8 architecture
> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
> "target/arm: Remove KVM support for 32-bit Arm hosts").
> 
> Only enable the following ARMv5 CPUs when TCG is available:
> 
>   - ARM926
>   - ARM946
>   - ARM1026
>   - XScale (PXA250/255/260/261/262/270)
> 
> The following machines are no more built when TCG is disabled:
> 
>   - akita                Sharp SL-C1000 (Akita) PDA (PXA270)
>   - ast2500-evb          Aspeed AST2500 EVB (ARM1176)
>   - ast2600-evb          Aspeed AST2600 EVB (Cortex A7)
>   - borzoi               Sharp SL-C3100 (Borzoi) PDA (PXA270)
>   - canon-a1100          Canon PowerShot A1100 IS (ARM946)
>   - collie               Sharp SL-5500 (Collie) PDA (SA-1110)
>   - connex               Gumstix Connex (PXA255)
>   - g220a-bmc            Bytedance G220A BMC (ARM1176)
>   - imx25-pdk            ARM i.MX25 PDK board (ARM926)
>   - integratorcp         ARM Integrator/CP (ARM926EJ-S)
>   - mainstone            Mainstone II (PXA27x)
>   - musicpal             Marvell 88w8618 / MusicPal (ARM926EJ-S)
>   - palmetto-bmc         OpenPOWER Palmetto BMC (ARM926EJ-S)
>   - realview-eb          ARM RealView Emulation Baseboard (ARM926EJ-S)
>   - romulus-bmc          OpenPOWER Romulus BMC (ARM1176)
>   - sonorapass-bmc       OCP SonoraPass BMC (ARM1176)
>   - spitz                Sharp SL-C3000 (Spitz) PDA (PXA270)
>   - supermicrox11-bmc    Supermicro X11 BMC (ARM926EJ-S)
>   - swift-bmc            OpenPOWER Swift BMC (ARM1176)
>   - tacoma-bmc           OpenPOWER Tacoma BMC (Cortex A7)
>   - terrier              Sharp SL-C3200 (Terrier) PDA (PXA270)
>   - tosa                 Sharp SL-6000 (Tosa) PDA (PXA255)
>   - verdex               Gumstix Verdex (PXA270)
>   - versatileab          ARM Versatile/AB (ARM926EJ-S)
>   - versatilepb          ARM Versatile/PB (ARM926EJ-S)
>   - witherspoon-bmc      OpenPOWER Witherspoon BMC (ARM1176)
>   - z2                   Zipit Z2 (PXA27x)
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  default-configs/devices/arm-softmmu.mak | 12 ------------
>  hw/arm/realview.c                       |  5 ++++-
>  tests/qtest/cdrom-test.c                |  6 +++++-
>  hw/arm/Kconfig                          | 19 +++++++++++++++++++
>  target/arm/Kconfig                      |  4 ++++
>  5 files changed, 32 insertions(+), 14 deletions(-)
> 
> diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
> index 6ae964c14fd..0aad35da0c4 100644
> --- a/default-configs/devices/arm-softmmu.mak
> +++ b/default-configs/devices/arm-softmmu.mak
> @@ -10,33 +10,21 @@ CONFIG_ARM_VIRT=y
>  CONFIG_CUBIEBOARD=y
>  CONFIG_EXYNOS4=y
>  CONFIG_HIGHBANK=y
> -CONFIG_INTEGRATOR=y
>  CONFIG_FSL_IMX31=y
> -CONFIG_MUSICPAL=y
>  CONFIG_MUSCA=y
>  CONFIG_NSERIES=y
>  CONFIG_STELLARIS=y
>  CONFIG_REALVIEW=y
> -CONFIG_VERSATILE=y
>  CONFIG_VEXPRESS=y
>  CONFIG_ZYNQ=y
> -CONFIG_MAINSTONE=y
> -CONFIG_GUMSTIX=y
> -CONFIG_SPITZ=y
> -CONFIG_TOSA=y
> -CONFIG_Z2=y
>  CONFIG_NPCM7XX=y
> -CONFIG_COLLIE=y
> -CONFIG_ASPEED_SOC=y
>  CONFIG_NETDUINO2=y
>  CONFIG_NETDUINOPLUS2=y
>  CONFIG_MPS2=y
>  CONFIG_RASPI=y
> -CONFIG_DIGIC=y
>  CONFIG_SABRELITE=y
>  CONFIG_EMCRAFT_SF2=y
>  CONFIG_MICROBIT=y
> -CONFIG_FSL_IMX25=y
>  CONFIG_FSL_IMX7=y
>  CONFIG_FSL_IMX6UL=y
>  CONFIG_ALLWINNER_H3=y
> diff --git a/hw/arm/realview.c b/hw/arm/realview.c
> index 0831159d158..2dcf0a4c23e 100644
> --- a/hw/arm/realview.c
> +++ b/hw/arm/realview.c
> @@ -18,6 +18,7 @@
>  #include "hw/pci/pci.h"
>  #include "net/net.h"
>  #include "sysemu/sysemu.h"
> +#include "sysemu/tcg.h"
>  #include "hw/boards.h"
>  #include "hw/i2c/i2c.h"
>  #include "exec/address-spaces.h"
> @@ -460,7 +461,9 @@ static const TypeInfo realview_pbx_a9_type = {
>  
>  static void realview_machine_init(void)
>  {
> -    type_register_static(&realview_eb_type);
> +    if (tcg_builtin()) {
> +        type_register_static(&realview_eb_type);
> +    }
>      type_register_static(&realview_eb_mpcore_type);
>      type_register_static(&realview_pb_a8_type);
>      type_register_static(&realview_pbx_a9_type);
> diff --git a/tests/qtest/cdrom-test.c b/tests/qtest/cdrom-test.c
> index 5af944a5fb7..1f1bc26fa7a 100644
> --- a/tests/qtest/cdrom-test.c
> +++ b/tests/qtest/cdrom-test.c
> @@ -222,7 +222,11 @@ int main(int argc, char **argv)
>          add_cdrom_param_tests(mips64machines);
>      } else if (g_str_equal(arch, "arm") || g_str_equal(arch, "aarch64")) {
>          const char *armmachines[] = {
> -            "realview-eb", "realview-eb-mpcore", "realview-pb-a8",
> +#ifdef CONFIG_TCG
> +            "realview-eb",
> +#endif /* CONFIG_TCG */
> +            "realview-eb-mpcore",
> +            "realview-pb-a8",
>              "realview-pbx-a9", "versatileab", "versatilepb", "vexpress-a15",
>              "vexpress-a9", "virt", NULL
>          };
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index f2957b33bee..560442bfc5c 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -42,6 +42,8 @@ config CUBIEBOARD
>  
>  config DIGIC
>      bool
> +    default y if TCG && ARM
> +    select ARM_V5
>      select PTIMER
>      select PFLASH_CFI02
>  
> @@ -72,6 +74,8 @@ config HIGHBANK
>  
>  config INTEGRATOR
>      bool
> +    default y if TCG && ARM
> +    select ARM_V5
>      select ARM_TIMER
>      select INTEGRATOR_DEBUG
>      select PL011 # UART
> @@ -84,6 +88,7 @@ config INTEGRATOR
>  
>  config MAINSTONE
>      bool
> +    default y if TCG && ARM
>      select PXA2XX
>      select PFLASH_CFI01
>      select SMC91C111
> @@ -98,6 +103,8 @@ config MUSCA
>  
>  config MUSICPAL
>      bool
> +    default y if TCG && ARM
> +    select ARM_V5
>      select OR_IRQ
>      select BITBANG_I2C
>      select MARVELL_88W8618
> @@ -138,6 +145,7 @@ config OMAP
>  
>  config PXA2XX
>      bool
> +    select ARM_V5
>      select FRAMEBUFFER
>      select I2C
>      select SERIAL
> @@ -147,12 +155,14 @@ config PXA2XX
>  
>  config GUMSTIX
>      bool
> +    default y if TCG && ARM
>      select PFLASH_CFI01
>      select SMC91C111
>      select PXA2XX
>  
>  config TOSA
>      bool
> +    default y if TCG && ARM
>      select ZAURUS  # scoop
>      select MICRODRIVE
>      select PXA2XX
> @@ -160,6 +170,7 @@ config TOSA
>  
>  config SPITZ
>      bool
> +    default y if TCG && ARM
>      select ADS7846 # touch-screen controller
>      select MAX111X # A/D converter
>      select WM8750  # audio codec
> @@ -172,6 +183,7 @@ config SPITZ
>  
>  config Z2
>      bool
> +    default y if TCG && ARM
>      select PFLASH_CFI01
>      select WM8750
>      select PL011 # UART
> @@ -245,6 +257,7 @@ config STRONGARM
>  
>  config COLLIE
>      bool
> +    default y if TCG && ARM
>      select PFLASH_CFI01
>      select ZAURUS  # scoop
>      select STRONGARM
> @@ -257,6 +270,8 @@ config SX1
>  
>  config VERSATILE
>      bool
> +    default y if TCG && ARM
> +    select ARM_V5
>      select ARM_TIMER # sp804
>      select PFLASH_CFI01
>      select LSI_SCSI_PCI
> @@ -376,6 +391,8 @@ config NPCM7XX
>  
>  config FSL_IMX25
>      bool
> +    default y if TCG && ARM
> +    select ARM_V5
>      select IMX
>      select IMX_FEC
>      select IMX_I2C
> @@ -402,6 +419,8 @@ config FSL_IMX6
>  
>  config ASPEED_SOC
>      bool
> +    default y if TCG && ARM
> +    select ARM_V5
>      select DS1338
>      select FTGMAC100
>      select I2C
> diff --git a/target/arm/Kconfig b/target/arm/Kconfig
> index 811e1e81652..9b3635617dc 100644
> --- a/target/arm/Kconfig
> +++ b/target/arm/Kconfig
> @@ -10,6 +10,10 @@ config ARM_V4
>      bool
>      depends on TCG && ARM
>  
> +config ARM_V5
> +    bool
> +    depends on TCG && ARM
> +
>  config ARM_V7M
>      bool
>      select PTIMER
> 

Looks good to me

Acked-by: Claudio Fontana <cfontana@suse.de>

[PATCH v6 05/11] target/arm: Restrict ARMv6 cpus to TCG accel

[Philippe Mathieu-Daudé]

KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae84ce:
"target/arm: Remove KVM support for 32-bit Arm hosts").

Only enable the following ARMv6 CPUs when TCG is available:

  - ARM1136
  - ARM1176
  - ARM11MPCore
  - Cortex-M0

The following machines are no more built when TCG is disabled:

  - kzm                  ARM KZM Emulation Baseboard (ARM1136)
  - microbit             BBC micro:bit (Cortex-M0)
  - n800                 Nokia N800 tablet aka. RX-34 (OMAP2420)
  - n810                 Nokia N810 tablet aka. RX-44 (OMAP2420)
  - realview-eb-mpcore   ARM RealView Emulation Baseboard (ARM11MPCore)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 default-configs/devices/arm-softmmu.mak | 2 --
 hw/arm/realview.c                       | 2 +-
 tests/qtest/cdrom-test.c                | 2 +-
 hw/arm/Kconfig                          | 6 ++++++
 target/arm/Kconfig                      | 4 ++++
 5 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
index 0aad35da0c4..175530595ce 100644
--- a/default-configs/devices/arm-softmmu.mak
+++ b/default-configs/devices/arm-softmmu.mak
@@ -10,9 +10,7 @@ CONFIG_ARM_VIRT=y
 CONFIG_CUBIEBOARD=y
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
-CONFIG_FSL_IMX31=y
 CONFIG_MUSCA=y
-CONFIG_NSERIES=y
 CONFIG_STELLARIS=y
 CONFIG_REALVIEW=y
 CONFIG_VEXPRESS=y
diff --git a/hw/arm/realview.c b/hw/arm/realview.c
index 2dcf0a4c23e..0606d22da14 100644
--- a/hw/arm/realview.c
+++ b/hw/arm/realview.c
@@ -463,8 +463,8 @@ static void realview_machine_init(void)
 {
     if (tcg_builtin()) {
         type_register_static(&realview_eb_type);
+        type_register_static(&realview_eb_mpcore_type);
     }
-    type_register_static(&realview_eb_mpcore_type);
     type_register_static(&realview_pb_a8_type);
     type_register_static(&realview_pbx_a9_type);
 }
diff --git a/tests/qtest/cdrom-test.c b/tests/qtest/cdrom-test.c
index 1f1bc26fa7a..cb0409c5a11 100644
--- a/tests/qtest/cdrom-test.c
+++ b/tests/qtest/cdrom-test.c
@@ -224,8 +224,8 @@ int main(int argc, char **argv)
         const char *armmachines[] = {
 #ifdef CONFIG_TCG
             "realview-eb",
-#endif /* CONFIG_TCG */
             "realview-eb-mpcore",
+#endif /* CONFIG_TCG */
             "realview-pb-a8",
             "realview-pbx-a9", "versatileab", "versatilepb", "vexpress-a15",
             "vexpress-a9", "virt", NULL
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 560442bfc5c..6c4bce4d637 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -123,6 +123,8 @@ config NETDUINOPLUS2
 
 config NSERIES
     bool
+    default y if TCG && ARM
+    select ARM_V6
     select OMAP
     select TMP105   # tempature sensor
     select BLIZZARD # LCD/TV controller
@@ -401,6 +403,8 @@ config FSL_IMX25
 
 config FSL_IMX31
     bool
+    default y if TCG && ARM
+    select ARM_V6
     select SERIAL
     select IMX
     select IMX_I2C
@@ -478,11 +482,13 @@ config FSL_IMX6UL
 
 config MICROBIT
     bool
+    default y if TCG && ARM
     select NRF51_SOC
 
 config NRF51_SOC
     bool
     select I2C
+    select ARM_V6
     select ARM_V7M
     select UNIMP
 
diff --git a/target/arm/Kconfig b/target/arm/Kconfig
index 9b3635617dc..fbb7bba9018 100644
--- a/target/arm/Kconfig
+++ b/target/arm/Kconfig
@@ -14,6 +14,10 @@ config ARM_V5
     bool
     depends on TCG && ARM
 
+config ARM_V6
+    bool
+    depends on TCG && ARM
+
 config ARM_V7M
     bool
     select PTIMER
-- 
2.26.2

Re: [PATCH v6 05/11] target/arm: Restrict ARMv6 cpus to TCG accel

[Claudio Fontana]

On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> KVM requires the target cpu to be at least ARMv8 architecture
> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
> "target/arm: Remove KVM support for 32-bit Arm hosts").
> 
> Only enable the following ARMv6 CPUs when TCG is available:
> 
>   - ARM1136
>   - ARM1176
>   - ARM11MPCore
>   - Cortex-M0
> 
> The following machines are no more built when TCG is disabled:
> 
>   - kzm                  ARM KZM Emulation Baseboard (ARM1136)
>   - microbit             BBC micro:bit (Cortex-M0)
>   - n800                 Nokia N800 tablet aka. RX-34 (OMAP2420)
>   - n810                 Nokia N810 tablet aka. RX-44 (OMAP2420)
>   - realview-eb-mpcore   ARM RealView Emulation Baseboard (ARM11MPCore)
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  default-configs/devices/arm-softmmu.mak | 2 --
>  hw/arm/realview.c                       | 2 +-
>  tests/qtest/cdrom-test.c                | 2 +-
>  hw/arm/Kconfig                          | 6 ++++++
>  target/arm/Kconfig                      | 4 ++++
>  5 files changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
> index 0aad35da0c4..175530595ce 100644
> --- a/default-configs/devices/arm-softmmu.mak
> +++ b/default-configs/devices/arm-softmmu.mak
> @@ -10,9 +10,7 @@ CONFIG_ARM_VIRT=y
>  CONFIG_CUBIEBOARD=y
>  CONFIG_EXYNOS4=y
>  CONFIG_HIGHBANK=y
> -CONFIG_FSL_IMX31=y
>  CONFIG_MUSCA=y
> -CONFIG_NSERIES=y
>  CONFIG_STELLARIS=y
>  CONFIG_REALVIEW=y
>  CONFIG_VEXPRESS=y
> diff --git a/hw/arm/realview.c b/hw/arm/realview.c
> index 2dcf0a4c23e..0606d22da14 100644
> --- a/hw/arm/realview.c
> +++ b/hw/arm/realview.c
> @@ -463,8 +463,8 @@ static void realview_machine_init(void)
>  {
>      if (tcg_builtin()) {
>          type_register_static(&realview_eb_type);
> +        type_register_static(&realview_eb_mpcore_type);
>      }
> -    type_register_static(&realview_eb_mpcore_type);
>      type_register_static(&realview_pb_a8_type);
>      type_register_static(&realview_pbx_a9_type);
>  }
> diff --git a/tests/qtest/cdrom-test.c b/tests/qtest/cdrom-test.c
> index 1f1bc26fa7a..cb0409c5a11 100644
> --- a/tests/qtest/cdrom-test.c
> +++ b/tests/qtest/cdrom-test.c
> @@ -224,8 +224,8 @@ int main(int argc, char **argv)
>          const char *armmachines[] = {
>  #ifdef CONFIG_TCG
>              "realview-eb",
> -#endif /* CONFIG_TCG */
>              "realview-eb-mpcore",
> +#endif /* CONFIG_TCG */
>              "realview-pb-a8",
>              "realview-pbx-a9", "versatileab", "versatilepb", "vexpress-a15",
>              "vexpress-a9", "virt", NULL
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index 560442bfc5c..6c4bce4d637 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -123,6 +123,8 @@ config NETDUINOPLUS2
>  
>  config NSERIES
>      bool
> +    default y if TCG && ARM
> +    select ARM_V6
>      select OMAP
>      select TMP105   # tempature sensor
>      select BLIZZARD # LCD/TV controller
> @@ -401,6 +403,8 @@ config FSL_IMX25
>  
>  config FSL_IMX31
>      bool
> +    default y if TCG && ARM
> +    select ARM_V6
>      select SERIAL
>      select IMX
>      select IMX_I2C
> @@ -478,11 +482,13 @@ config FSL_IMX6UL
>  
>  config MICROBIT
>      bool
> +    default y if TCG && ARM
>      select NRF51_SOC
>  
>  config NRF51_SOC
>      bool
>      select I2C
> +    select ARM_V6
>      select ARM_V7M
>      select UNIMP
>  
> diff --git a/target/arm/Kconfig b/target/arm/Kconfig
> index 9b3635617dc..fbb7bba9018 100644
> --- a/target/arm/Kconfig
> +++ b/target/arm/Kconfig
> @@ -14,6 +14,10 @@ config ARM_V5
>      bool
>      depends on TCG && ARM
>  
> +config ARM_V6
> +    bool
> +    depends on TCG && ARM
> +
>  config ARM_V7M
>      bool
>      select PTIMER
> 

Added Cc: Eduardo,

Looks good to me in general,

Acked-by: Claudio Fontana <cfontana@suse.de>

I am just wondering about that if (tcg_builtin()) / (or _available() as I suggest elsewhere), 
should we instead use the build system already at this stage, so no such check is necessary?

It could be a successive change, but then tcg_builtin() would be introduced, only to become useless after the proper refactoring is done,
and the build system is used to select the right modules to compile, which would do the registration.

Ciao,

Claudio

Re: [PATCH v6 05/11] target/arm: Restrict ARMv6 cpus to TCG accel

[Alex Bennée]

Philippe Mathieu-Daudé <f4bug@amsat.org> writes:

> KVM requires the target cpu to be at least ARMv8 architecture
> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
> "target/arm: Remove KVM support for 32-bit Arm hosts").
>
> Only enable the following ARMv6 CPUs when TCG is available:
>
>   - ARM1136
>   - ARM1176
>   - ARM11MPCore
>   - Cortex-M0
>
> The following machines are no more built when TCG is disabled:
>
>   - kzm                  ARM KZM Emulation Baseboard (ARM1136)
>   - microbit             BBC micro:bit (Cortex-M0)
>   - n800                 Nokia N800 tablet aka. RX-34 (OMAP2420)
>   - n810                 Nokia N810 tablet aka. RX-44 (OMAP2420)
>   - realview-eb-mpcore   ARM RealView Emulation Baseboard (ARM11MPCore)
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  default-configs/devices/arm-softmmu.mak | 2 --
>  hw/arm/realview.c                       | 2 +-
>  tests/qtest/cdrom-test.c                | 2 +-
>  hw/arm/Kconfig                          | 6 ++++++
>  target/arm/Kconfig                      | 4 ++++
>  5 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
> index 0aad35da0c4..175530595ce 100644
> --- a/default-configs/devices/arm-softmmu.mak
> +++ b/default-configs/devices/arm-softmmu.mak
> @@ -10,9 +10,7 @@ CONFIG_ARM_VIRT=y
>  CONFIG_CUBIEBOARD=y
>  CONFIG_EXYNOS4=y
>  CONFIG_HIGHBANK=y
> -CONFIG_FSL_IMX31=y
>  CONFIG_MUSCA=y
> -CONFIG_NSERIES=y
>  CONFIG_STELLARIS=y
>  CONFIG_REALVIEW=y
>  CONFIG_VEXPRESS=y
> diff --git a/hw/arm/realview.c b/hw/arm/realview.c
> index 2dcf0a4c23e..0606d22da14 100644
> --- a/hw/arm/realview.c
> +++ b/hw/arm/realview.c
> @@ -463,8 +463,8 @@ static void realview_machine_init(void)
>  {
>      if (tcg_builtin()) {
>          type_register_static(&realview_eb_type);
> +        type_register_static(&realview_eb_mpcore_type);
>      }
> -    type_register_static(&realview_eb_mpcore_type);
>      type_register_static(&realview_pb_a8_type);
>      type_register_static(&realview_pbx_a9_type);
>  }

This confuses me - are we even able to run a realview image under KVM?
Surely the whole of realview should be TCG only?

The rest looks fine to me though:

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

-- 
Alex Bennée

[PATCH v6 06/11] target/arm: Restrict ARMv7 R-profile cpus to TCG accel

[Philippe Mathieu-Daudé]

KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae84ce:
"target/arm: Remove KVM support for 32-bit Arm hosts").

Beside, KVM only supports A-profile, thus won't be able to run
R-profile cpus.

Only enable the following ARMv7 R-Profile CPUs when TCG is available:

  - Cortex-R5
  - Cortex-R5F

The following machine is no more built when TCG is disabled:

  - xlnx-zcu102          Xilinx ZynqMP ZCU102 board with 4xA53s and 2xR5Fs

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 default-configs/devices/aarch64-softmmu.mak | 1 -
 hw/arm/Kconfig                              | 2 ++
 target/arm/Kconfig                          | 4 ++++
 3 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/default-configs/devices/aarch64-softmmu.mak b/default-configs/devices/aarch64-softmmu.mak
index 958b1e08e40..a4202f56817 100644
--- a/default-configs/devices/aarch64-softmmu.mak
+++ b/default-configs/devices/aarch64-softmmu.mak
@@ -3,6 +3,5 @@
 # We support all the 32 bit boards so need all their config
 include arm-softmmu.mak
 
-CONFIG_XLNX_ZYNQMP_ARM=y
 CONFIG_XLNX_VERSAL=y
 CONFIG_SBSA_REF=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 6c4bce4d637..4baf1f97694 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -360,8 +360,10 @@ config STM32F405_SOC
 
 config XLNX_ZYNQMP_ARM
     bool
+    default y if TCG && ARM
     select AHCI
     select ARM_GIC
+    select ARM_V7R
     select CADENCE
     select DDC
     select DPCD
diff --git a/target/arm/Kconfig b/target/arm/Kconfig
index fbb7bba9018..4dc96c46520 100644
--- a/target/arm/Kconfig
+++ b/target/arm/Kconfig
@@ -18,6 +18,10 @@ config ARM_V6
     bool
     depends on TCG && ARM
 
+config ARM_V7R
+    bool
+    depends on TCG && ARM
+
 config ARM_V7M
     bool
     select PTIMER
-- 
2.26.2

Re: [PATCH v6 06/11] target/arm: Restrict ARMv7 R-profile cpus to TCG accel

[Philippe Mathieu-Daudé]

On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> KVM requires the target cpu to be at least ARMv8 architecture
> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
> "target/arm: Remove KVM support for 32-bit Arm hosts").
> 
> Beside, KVM only supports A-profile, thus won't be able to run
> R-profile cpus.
> 
> Only enable the following ARMv7 R-Profile CPUs when TCG is available:
> 
>   - Cortex-R5
>   - Cortex-R5F
> 
> The following machine is no more built when TCG is disabled:
> 
>   - xlnx-zcu102          Xilinx ZynqMP ZCU102 board with 4xA53s and 2xR5Fs
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  default-configs/devices/aarch64-softmmu.mak | 1 -
>  hw/arm/Kconfig                              | 2 ++
>  target/arm/Kconfig                          | 4 ++++
>  3 files changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/default-configs/devices/aarch64-softmmu.mak b/default-configs/devices/aarch64-softmmu.mak
> index 958b1e08e40..a4202f56817 100644
> --- a/default-configs/devices/aarch64-softmmu.mak
> +++ b/default-configs/devices/aarch64-softmmu.mak
> @@ -3,6 +3,5 @@
>  # We support all the 32 bit boards so need all their config
>  include arm-softmmu.mak
>  
> -CONFIG_XLNX_ZYNQMP_ARM=y
>  CONFIG_XLNX_VERSAL=y
>  CONFIG_SBSA_REF=y
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index 6c4bce4d637..4baf1f97694 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -360,8 +360,10 @@ config STM32F405_SOC
>  
>  config XLNX_ZYNQMP_ARM
>      bool
> +    default y if TCG && ARM

The correct line is:

      "default y if TCG && AARCH64"

>      select AHCI
>      select ARM_GIC
> +    select ARM_V7R
>      select CADENCE
>      select DDC
>      select DPCD
> diff --git a/target/arm/Kconfig b/target/arm/Kconfig
> index fbb7bba9018..4dc96c46520 100644
> --- a/target/arm/Kconfig
> +++ b/target/arm/Kconfig
> @@ -18,6 +18,10 @@ config ARM_V6
>      bool
>      depends on TCG && ARM
>  
> +config ARM_V7R
> +    bool
> +    depends on TCG && ARM
> +
>  config ARM_V7M
>      bool
>      select PTIMER
> 

Re: [PATCH v6 06/11] target/arm: Restrict ARMv7 R-profile cpus to TCG accel

[Alex Bennée]

Philippe Mathieu-Daudé <philmd@redhat.com> writes:

> On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
>> KVM requires the target cpu to be at least ARMv8 architecture
>> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
>> "target/arm: Remove KVM support for 32-bit Arm hosts").
>> 
>> Beside, KVM only supports A-profile, thus won't be able to run
>> R-profile cpus.
>> 
>> Only enable the following ARMv7 R-Profile CPUs when TCG is available:
>> 
>>   - Cortex-R5
>>   - Cortex-R5F
>> 
>> The following machine is no more built when TCG is disabled:
>> 
>>   - xlnx-zcu102          Xilinx ZynqMP ZCU102 board with 4xA53s and 2xR5Fs
>> 
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> ---
>>  default-configs/devices/aarch64-softmmu.mak | 1 -
>>  hw/arm/Kconfig                              | 2 ++
>>  target/arm/Kconfig                          | 4 ++++
>>  3 files changed, 6 insertions(+), 1 deletion(-)
>> 
>> diff --git a/default-configs/devices/aarch64-softmmu.mak b/default-configs/devices/aarch64-softmmu.mak
>> index 958b1e08e40..a4202f56817 100644
>> --- a/default-configs/devices/aarch64-softmmu.mak
>> +++ b/default-configs/devices/aarch64-softmmu.mak
>> @@ -3,6 +3,5 @@
>>  # We support all the 32 bit boards so need all their config
>>  include arm-softmmu.mak
>>  
>> -CONFIG_XLNX_ZYNQMP_ARM=y
>>  CONFIG_XLNX_VERSAL=y
>>  CONFIG_SBSA_REF=y
>> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
>> index 6c4bce4d637..4baf1f97694 100644
>> --- a/hw/arm/Kconfig
>> +++ b/hw/arm/Kconfig
>> @@ -360,8 +360,10 @@ config STM32F405_SOC
>>  
>>  config XLNX_ZYNQMP_ARM
>>      bool
>> +    default y if TCG && ARM
>
> The correct line is:
>
>       "default y if TCG && AARCH64"

Ahh yes, TIL we had some R-profile cores in QEMU ;-)

with the fix:

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

-- 
Alex Bennée

Re: [PATCH v6 06/11] target/arm: Restrict ARMv7 R-profile cpus to TCG accel

[Claudio Fontana]

On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> KVM requires the target cpu to be at least ARMv8 architecture
> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
> "target/arm: Remove KVM support for 32-bit Arm hosts").
> 
> Beside, KVM only supports A-profile, thus won't be able to run
> R-profile cpus.
> 
> Only enable the following ARMv7 R-Profile CPUs when TCG is available:
> 
>   - Cortex-R5
>   - Cortex-R5F
> 
> The following machine is no more built when TCG is disabled:
> 
>   - xlnx-zcu102          Xilinx ZynqMP ZCU102 board with 4xA53s and 2xR5Fs
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  default-configs/devices/aarch64-softmmu.mak | 1 -
>  hw/arm/Kconfig                              | 2 ++
>  target/arm/Kconfig                          | 4 ++++
>  3 files changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/default-configs/devices/aarch64-softmmu.mak b/default-configs/devices/aarch64-softmmu.mak
> index 958b1e08e40..a4202f56817 100644
> --- a/default-configs/devices/aarch64-softmmu.mak
> +++ b/default-configs/devices/aarch64-softmmu.mak
> @@ -3,6 +3,5 @@
>  # We support all the 32 bit boards so need all their config
>  include arm-softmmu.mak
>  
> -CONFIG_XLNX_ZYNQMP_ARM=y
>  CONFIG_XLNX_VERSAL=y
>  CONFIG_SBSA_REF=y
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index 6c4bce4d637..4baf1f97694 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -360,8 +360,10 @@ config STM32F405_SOC
>  
>  config XLNX_ZYNQMP_ARM
>      bool
> +    default y if TCG && ARM
>      select AHCI
>      select ARM_GIC
> +    select ARM_V7R
>      select CADENCE
>      select DDC
>      select DPCD
> diff --git a/target/arm/Kconfig b/target/arm/Kconfig
> index fbb7bba9018..4dc96c46520 100644
> --- a/target/arm/Kconfig
> +++ b/target/arm/Kconfig
> @@ -18,6 +18,10 @@ config ARM_V6
>      bool
>      depends on TCG && ARM
>  
> +config ARM_V7R
> +    bool
> +    depends on TCG && ARM
> +
>  config ARM_V7M
>      bool
>      select PTIMER
> 

Acked-by: Claudio Fontana <cfontana@suse.de>

[PATCH v6 07/11] target/arm: Restrict ARMv7 M-profile cpus to TCG accel

[Philippe Mathieu-Daudé]

KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae84ce:
"target/arm: Remove KVM support for 32-bit Arm hosts").

Beside, KVM only supports A-profile, thus won't be able to run
M-profile cpus.

Only enable the following ARMv7 M-Profile CPUs when TCG is available:

  - Cortex-M0
  - Cortex-M3
  - Cortex-M4
  - Cortex-M33

The following machines are no more built when TCG is disabled:

  - emcraft-sf2          SmartFusion2 SOM kit from Emcraft (M2S010)
  - highbank             Calxeda Highbank (ECX-1000)
  - lm3s6965evb          Stellaris LM3S6965EVB (Cortex-M3)
  - lm3s811evb           Stellaris LM3S811EVB (Cortex-M3)
  - midway               Calxeda Midway (ECX-2000)
  - mps2-an385           ARM MPS2 with AN385 FPGA image for Cortex-M3
  - mps2-an386           ARM MPS2 with AN386 FPGA image for Cortex-M4
  - mps2-an500           ARM MPS2 with AN500 FPGA image for Cortex-M7
  - mps2-an505           ARM MPS2 with AN505 FPGA image for Cortex-M33
  - mps2-an511           ARM MPS2 with AN511 DesignStart FPGA image for Cortex-M3
  - mps2-an521           ARM MPS2 with AN521 FPGA image for dual Cortex-M33
  - musca-a              ARM Musca-A board (dual Cortex-M33)
  - musca-b1             ARM Musca-B1 board (dual Cortex-M33)
  - netduino2            Netduino 2 Machine (Cortex-M3)
  - netduinoplus2        Netduino Plus 2 Machine(Cortex-M4)

We don't need to enforce CONFIG_ARM_V7M in default-configs anymore.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 default-configs/devices/arm-softmmu.mak | 11 -----------
 hw/arm/Kconfig                          |  7 +++++++
 target/arm/Kconfig                      |  1 +
 3 files changed, 8 insertions(+), 11 deletions(-)

diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
index 175530595ce..0fc80d7d6df 100644
--- a/default-configs/devices/arm-softmmu.mak
+++ b/default-configs/devices/arm-softmmu.mak
@@ -1,28 +1,17 @@
 # Default configuration for arm-softmmu
 
-# TODO: ARM_V7M is currently always required - make this more flexible!
-CONFIG_ARM_V7M=y
-
 # CONFIG_PCI_DEVICES=n
 # CONFIG_TEST_DEVICES=n
 
 CONFIG_ARM_VIRT=y
 CONFIG_CUBIEBOARD=y
 CONFIG_EXYNOS4=y
-CONFIG_HIGHBANK=y
-CONFIG_MUSCA=y
-CONFIG_STELLARIS=y
 CONFIG_REALVIEW=y
 CONFIG_VEXPRESS=y
 CONFIG_ZYNQ=y
 CONFIG_NPCM7XX=y
-CONFIG_NETDUINO2=y
-CONFIG_NETDUINOPLUS2=y
-CONFIG_MPS2=y
 CONFIG_RASPI=y
 CONFIG_SABRELITE=y
-CONFIG_EMCRAFT_SF2=y
-CONFIG_MICROBIT=y
 CONFIG_FSL_IMX7=y
 CONFIG_FSL_IMX6UL=y
 CONFIG_ALLWINNER_H3=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 4baf1f97694..62f8b0d24e7 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -60,6 +60,7 @@ config EXYNOS4
 
 config HIGHBANK
     bool
+    default y if TCG && ARM
     select A9MPCORE
     select A15MPCORE
     select AHCI
@@ -95,6 +96,7 @@ config MAINSTONE
 
 config MUSCA
     bool
+    default y if TCG && ARM
     select ARMSSE
     select PL011
     select PL031
@@ -115,10 +117,12 @@ config MUSICPAL
 
 config NETDUINO2
     bool
+    default y if TCG && ARM
     select STM32F205_SOC
 
 config NETDUINOPLUS2
     bool
+    default y if TCG && ARM
     select STM32F405_SOC
 
 config NSERIES
@@ -240,6 +244,7 @@ config SABRELITE
 
 config STELLARIS
     bool
+    default y if TCG && ARM
     select ARM_V7M
     select CMSDK_APB_WATCHDOG
     select I2C
@@ -443,6 +448,7 @@ config ASPEED_SOC
 
 config MPS2
     bool
+    default y if TCG && ARM
     select ARMSSE
     select LAN9118
     select MPS2_FPGAIO
@@ -496,6 +502,7 @@ config NRF51_SOC
 
 config EMCRAFT_SF2
     bool
+    default y if TCG && ARM
     select MSF2
     select SSI_M25P80
 
diff --git a/target/arm/Kconfig b/target/arm/Kconfig
index 4dc96c46520..07a2fad7a2b 100644
--- a/target/arm/Kconfig
+++ b/target/arm/Kconfig
@@ -24,4 +24,5 @@ config ARM_V7R
 
 config ARM_V7M
     bool
+    depends on TCG && ARM
     select PTIMER
-- 
2.26.2

Re: [PATCH v6 07/11] target/arm: Restrict ARMv7 M-profile cpus to TCG accel

[Claudio Fontana]

On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> KVM requires the target cpu to be at least ARMv8 architecture
> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
> "target/arm: Remove KVM support for 32-bit Arm hosts").
> 
> Beside, KVM only supports A-profile, thus won't be able to run
> M-profile cpus.
> 
> Only enable the following ARMv7 M-Profile CPUs when TCG is available:
> 
>   - Cortex-M0
>   - Cortex-M3
>   - Cortex-M4
>   - Cortex-M33
> 
> The following machines are no more built when TCG is disabled:
> 
>   - emcraft-sf2          SmartFusion2 SOM kit from Emcraft (M2S010)
>   - highbank             Calxeda Highbank (ECX-1000)
>   - lm3s6965evb          Stellaris LM3S6965EVB (Cortex-M3)
>   - lm3s811evb           Stellaris LM3S811EVB (Cortex-M3)
>   - midway               Calxeda Midway (ECX-2000)
>   - mps2-an385           ARM MPS2 with AN385 FPGA image for Cortex-M3
>   - mps2-an386           ARM MPS2 with AN386 FPGA image for Cortex-M4
>   - mps2-an500           ARM MPS2 with AN500 FPGA image for Cortex-M7
>   - mps2-an505           ARM MPS2 with AN505 FPGA image for Cortex-M33
>   - mps2-an511           ARM MPS2 with AN511 DesignStart FPGA image for Cortex-M3
>   - mps2-an521           ARM MPS2 with AN521 FPGA image for dual Cortex-M33
>   - musca-a              ARM Musca-A board (dual Cortex-M33)
>   - musca-b1             ARM Musca-B1 board (dual Cortex-M33)
>   - netduino2            Netduino 2 Machine (Cortex-M3)
>   - netduinoplus2        Netduino Plus 2 Machine(Cortex-M4)
> 
> We don't need to enforce CONFIG_ARM_V7M in default-configs anymore.
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  default-configs/devices/arm-softmmu.mak | 11 -----------
>  hw/arm/Kconfig                          |  7 +++++++
>  target/arm/Kconfig                      |  1 +
>  3 files changed, 8 insertions(+), 11 deletions(-)
> 
> diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
> index 175530595ce..0fc80d7d6df 100644
> --- a/default-configs/devices/arm-softmmu.mak
> +++ b/default-configs/devices/arm-softmmu.mak
> @@ -1,28 +1,17 @@
>  # Default configuration for arm-softmmu
>  
> -# TODO: ARM_V7M is currently always required - make this more flexible!
> -CONFIG_ARM_V7M=y
> -
>  # CONFIG_PCI_DEVICES=n
>  # CONFIG_TEST_DEVICES=n
>  
>  CONFIG_ARM_VIRT=y
>  CONFIG_CUBIEBOARD=y
>  CONFIG_EXYNOS4=y
> -CONFIG_HIGHBANK=y
> -CONFIG_MUSCA=y
> -CONFIG_STELLARIS=y
>  CONFIG_REALVIEW=y
>  CONFIG_VEXPRESS=y
>  CONFIG_ZYNQ=y
>  CONFIG_NPCM7XX=y
> -CONFIG_NETDUINO2=y
> -CONFIG_NETDUINOPLUS2=y
> -CONFIG_MPS2=y
>  CONFIG_RASPI=y
>  CONFIG_SABRELITE=y
> -CONFIG_EMCRAFT_SF2=y
> -CONFIG_MICROBIT=y
>  CONFIG_FSL_IMX7=y
>  CONFIG_FSL_IMX6UL=y
>  CONFIG_ALLWINNER_H3=y
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index 4baf1f97694..62f8b0d24e7 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -60,6 +60,7 @@ config EXYNOS4
>  
>  config HIGHBANK
>      bool
> +    default y if TCG && ARM
>      select A9MPCORE
>      select A15MPCORE
>      select AHCI
> @@ -95,6 +96,7 @@ config MAINSTONE
>  
>  config MUSCA
>      bool
> +    default y if TCG && ARM
>      select ARMSSE
>      select PL011
>      select PL031
> @@ -115,10 +117,12 @@ config MUSICPAL
>  
>  config NETDUINO2
>      bool
> +    default y if TCG && ARM
>      select STM32F205_SOC
>  
>  config NETDUINOPLUS2
>      bool
> +    default y if TCG && ARM
>      select STM32F405_SOC
>  
>  config NSERIES
> @@ -240,6 +244,7 @@ config SABRELITE
>  
>  config STELLARIS
>      bool
> +    default y if TCG && ARM
>      select ARM_V7M
>      select CMSDK_APB_WATCHDOG
>      select I2C
> @@ -443,6 +448,7 @@ config ASPEED_SOC
>  
>  config MPS2
>      bool
> +    default y if TCG && ARM
>      select ARMSSE
>      select LAN9118
>      select MPS2_FPGAIO
> @@ -496,6 +502,7 @@ config NRF51_SOC
>  
>  config EMCRAFT_SF2
>      bool
> +    default y if TCG && ARM
>      select MSF2
>      select SSI_M25P80
>  
> diff --git a/target/arm/Kconfig b/target/arm/Kconfig
> index 4dc96c46520..07a2fad7a2b 100644
> --- a/target/arm/Kconfig
> +++ b/target/arm/Kconfig
> @@ -24,4 +24,5 @@ config ARM_V7R
>  
>  config ARM_V7M
>      bool
> +    depends on TCG && ARM
>      select PTIMER
> 

Acked-by: Claudio Fontana <cfontana@suse.de>

[PATCH v6 08/11] target/arm: Make m_helper.c optional via CONFIG_ARM_V7M

[Philippe Mathieu-Daudé]

From: Thomas Huth <thuth@redhat.com>

We've already got the CONFIG_ARM_V7M switch, but it currently can
not be disabled yet. The m_helper.c code should not be compiled
into the binary if the switch is not enabled. We also have to
provide some stubs in a separate file to make sure that we still
can link the other code without CONFIG_ARM_V7M.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190903154810.27365-4-thuth@redhat.com>
[PMD: Keep m_helper-stub.c but extend it, rewrite the rest]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Rewrite since v3, therefore removed Richard R-b tag.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 target/arm/cpu.h           | 12 -------
 target/arm/cpu_tcg.c       |  4 ++-
 target/arm/helper.c        |  7 ----
 target/arm/m_helper-stub.c | 73 ++++++++++++++++++++++++++++++++++++++
 target/arm/meson.build     |  4 ++-
 5 files changed, 79 insertions(+), 21 deletions(-)
 create mode 100644 target/arm/m_helper-stub.c

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index d080239863c..0bd0e51e498 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -2281,12 +2281,6 @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
 /* Interface between CPU and Interrupt controller.  */
 #ifndef CONFIG_USER_ONLY
 bool armv7m_nvic_can_take_pending_exception(void *opaque);
-#else
-static inline bool armv7m_nvic_can_take_pending_exception(void *opaque)
-{
-    return true;
-}
-#endif
 /**
  * armv7m_nvic_set_pending: mark the specified exception as pending
  * @opaque: the NVIC
@@ -2392,13 +2386,7 @@ int armv7m_nvic_raw_execution_priority(void *opaque);
  * @secure: the security state to test
  * This corresponds to the pseudocode IsReqExecPriNeg().
  */
-#ifndef CONFIG_USER_ONLY
 bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure);
-#else
-static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure)
-{
-    return false;
-}
 #endif
 
 /* Interface for defining coprocessor registers.
diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
index 98544db2df3..3e1c9b40353 100644
--- a/target/arm/cpu_tcg.c
+++ b/target/arm/cpu_tcg.c
@@ -15,6 +15,7 @@
 /* CPU models. These are not needed for the AArch64 linux-user build. */
 #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
 
+#ifndef CONFIG_USER_ONLY
 static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
 {
     CPUClass *cc = CPU_GET_CLASS(cs);
@@ -38,6 +39,7 @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
     }
     return ret;
 }
+#endif /* CONFIG_USER_ONLY */
 
 static void arm926_initfn(Object *obj)
 {
@@ -666,9 +668,9 @@ static void arm_v7m_class_init(ObjectClass *oc, void *data)
     acc->info = data;
 #ifndef CONFIG_USER_ONLY
     cc->do_interrupt = arm_v7m_cpu_do_interrupt;
+    cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt;
 #endif
 
-    cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt;
     cc->gdb_core_xml_file = "arm-m-profile.xml";
 }
 
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 47e266d7e64..fe3d0291f9c 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -12825,13 +12825,6 @@ int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx)
     }
 }
 
-#ifndef CONFIG_TCG
-ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate)
-{
-    g_assert_not_reached();
-}
-#endif
-
 ARMMMUIdx arm_mmu_idx_el(CPUARMState *env, int el)
 {
     ARMMMUIdx idx;
diff --git a/target/arm/m_helper-stub.c b/target/arm/m_helper-stub.c
new file mode 100644
index 00000000000..6d751424e86
--- /dev/null
+++ b/target/arm/m_helper-stub.c
@@ -0,0 +1,73 @@
+/*
+ * ARM V7M related stubs.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#include "qemu/osdep.h"
+#include "cpu.h"
+#include "exec/helper-proto.h"
+#include "internals.h"
+
+void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest)
+{
+    g_assert_not_reached();
+}
+
+void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest)
+{
+    g_assert_not_reached();
+}
+
+uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg)
+{
+    g_assert_not_reached();
+}
+
+void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val)
+{
+    g_assert_not_reached();
+}
+
+uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op)
+{
+    g_assert_not_reached();
+}
+
+void HELPER(v7m_preserve_fp_state)(CPUARMState *env)
+{
+    g_assert_not_reached();
+}
+
+void write_v7m_exception(CPUARMState *env, uint32_t new_exc)
+{
+    g_assert_not_reached();
+}
+
+void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr)
+{
+    g_assert_not_reached();
+}
+
+void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr)
+{
+    g_assert_not_reached();
+}
+
+ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate)
+{
+    g_assert_not_reached();
+}
+
+#ifndef CONFIG_USER_ONLY
+
+bool armv7m_nvic_can_take_pending_exception(void *opaque)
+{
+    g_assert_not_reached();
+}
+
+void arm_v7m_cpu_do_interrupt(CPUState *cs)
+{
+    g_assert_not_reached();
+}
+
+#endif /* CONFIG_USER_ONLY */
diff --git a/target/arm/meson.build b/target/arm/meson.build
index 15b936c1010..6c6081966cd 100644
--- a/target/arm/meson.build
+++ b/target/arm/meson.build
@@ -21,7 +21,6 @@
   'gdbstub.c',
   'helper.c',
   'iwmmxt_helper.c',
-  'm_helper.c',
   'neon_helper.c',
   'op_helper.c',
   'tlb_helper.c',
@@ -32,6 +31,9 @@
 ))
 arm_ss.add(zlib)
 
+arm_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('m_helper.c'), if_false: files('m_helper-stub.c'))
+arm_ss.add(when: 'CONFIG_TCG', if_false: files('m_helper-stub.c'))
+
 arm_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c', 'kvm64.c'), if_false: files('kvm-stub.c'))
 
 arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
-- 
2.26.2

[PATCH v6 09/11] target/arm: Reorder meson.build rules

[Philippe Mathieu-Daudé]

From: Philippe Mathieu-Daudé <philmd@redhat.com>

Reorder the rules to make this file easier to modify.
No logical change introduced in this commit.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 target/arm/meson.build | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/target/arm/meson.build b/target/arm/meson.build
index 6c6081966cd..aac9a383a61 100644
--- a/target/arm/meson.build
+++ b/target/arm/meson.build
@@ -14,31 +14,36 @@
 
 arm_ss = ss.source_set()
 arm_ss.add(gen)
+arm_ss.add(zlib)
 arm_ss.add(files(
   'cpu.c',
-  'crypto_helper.c',
-  'debug_helper.c',
   'gdbstub.c',
   'helper.c',
+  'vfp_helper.c',
+))
+
+arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
+  'cpu64.c',
+  'gdbstub64.c',
+))
+
+arm_ss.add(files(
+  'crypto_helper.c',
+  'debug_helper.c',
   'iwmmxt_helper.c',
   'neon_helper.c',
   'op_helper.c',
   'tlb_helper.c',
   'translate.c',
   'vec_helper.c',
-  'vfp_helper.c',
   'cpu_tcg.c',
 ))
-arm_ss.add(zlib)
-
 arm_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('m_helper.c'), if_false: files('m_helper-stub.c'))
 arm_ss.add(when: 'CONFIG_TCG', if_false: files('m_helper-stub.c'))
 
 arm_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c', 'kvm64.c'), if_false: files('kvm-stub.c'))
 
 arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
-  'cpu64.c',
-  'gdbstub64.c',
   'helper-a64.c',
   'mte_helper.c',
   'pauth_helper.c',
-- 
2.26.2

[PATCH v6 10/11] target/arm: Do not build TCG objects when TCG is off

[Philippe Mathieu-Daudé]

From: Samuel Ortiz <sameo@linux.intel.com>

We can now safely turn all TCG dependent build off when CONFIG_TCG is
off. This allows building ARM binaries with --disable-tcg.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
[PMD: Heavily rebased during more than 2 years then finally rewritten]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 target/arm/meson.build | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/target/arm/meson.build b/target/arm/meson.build
index aac9a383a61..11b7c0e18fe 100644
--- a/target/arm/meson.build
+++ b/target/arm/meson.build
@@ -27,7 +27,8 @@
   'gdbstub64.c',
 ))
 
-arm_ss.add(files(
+arm_tcg_ss = ss.source_set()
+arm_tcg_ss.add(files(
   'crypto_helper.c',
   'debug_helper.c',
   'iwmmxt_helper.c',
@@ -38,12 +39,12 @@
   'vec_helper.c',
   'cpu_tcg.c',
 ))
-arm_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('m_helper.c'), if_false: files('m_helper-stub.c'))
+arm_tcg_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('m_helper.c'), if_false: files('m_helper-stub.c'))
 arm_ss.add(when: 'CONFIG_TCG', if_false: files('m_helper-stub.c'))
 
 arm_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c', 'kvm64.c'), if_false: files('kvm-stub.c'))
 
-arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
+arm_tcg_ss.add(when: 'TARGET_AARCH64', if_true: files(
   'helper-a64.c',
   'mte_helper.c',
   'pauth_helper.c',
@@ -52,14 +53,16 @@
   'translate-sve.c',
 ))
 
+arm_ss.add_all(when: 'CONFIG_TCG', if_true: arm_tcg_ss)
+
 arm_softmmu_ss = ss.source_set()
 arm_softmmu_ss.add(files(
   'arch_dump.c',
   'arm-powerctl.c',
   'machine.c',
   'monitor.c',
-  'psci.c',
 ))
+arm_softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('psci.c'))
 
 target_arch += {'arm': arm_ss}
 target_softmmu_arch += {'arm': arm_softmmu_ss}
-- 
2.26.2

[PATCH v6 11/11] .travis.yml: Add a KVM-only Aarch64 job

[Philippe Mathieu-Daudé]

From: Philippe Mathieu-Daudé <philmd@redhat.com>

Add a job to build QEMU on Aarch64 with TCG disabled, so
this configuration won't bitrot over time.

We explicitly modify default-configs/aarch64-softmmu.mak to
only select the 'virt' and 'SBSA-REF' machines.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Job ran for 7 min 30 sec
https://travis-ci.org/github/philmd/qemu/jobs/731428859
---
 .travis.yml | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/.travis.yml b/.travis.yml
index 5f1dea873ec..4f1d662b5fc 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -264,6 +264,38 @@ jobs:
         - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS}"
         - UNRELIABLE=true
 
+    - name: "[aarch64] GCC (disable-tcg)"
+      arch: arm64
+      dist: focal
+      addons:
+        apt_packages:
+          - libaio-dev
+          - libattr1-dev
+          - libbrlapi-dev
+          - libcap-ng-dev
+          - libgcrypt20-dev
+          - libgnutls28-dev
+          - libgtk-3-dev
+          - libiscsi-dev
+          - liblttng-ust-dev
+          - libncurses5-dev
+          - libnfs-dev
+          - libnss3-dev
+          - libpixman-1-dev
+          - libpng-dev
+          - librados-dev
+          - libsdl2-dev
+          - libseccomp-dev
+          - liburcu-dev
+          - libusb-1.0-0-dev
+          - libvdeplug-dev
+          - libvte-2.91-dev
+          - ninja-build
+      env:
+        - CONFIG="--disable-containers --disable-tcg --enable-kvm --disable-xen --disable-tools --disable-docs"
+        - TEST_CMD="make check-unit"
+        - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-aarch64"
+
     - name: "[ppc64] GCC check-tcg"
       arch: ppc64le
       dist: focal
-- 
2.26.2

Re: [PATCH v6 11/11] .travis.yml: Add a KVM-only Aarch64 job

[Philippe Mathieu-Daudé]

On Sun, Jan 31, 2021 at 12:51 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> From: Philippe Mathieu-Daudé <philmd@redhat.com>
>
> Add a job to build QEMU on Aarch64 with TCG disabled, so
> this configuration won't bitrot over time.
>
> We explicitly modify default-configs/aarch64-softmmu.mak to
> only select the 'virt' and 'SBSA-REF' machines.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> Job ran for 7 min 30 sec
> https://travis-ci.org/github/philmd/qemu/jobs/731428859

BTW I added this patch for completeness but I couldn't test it again
as I don't have anymore Travis-CI credit. I however tested it on a similar
Ubuntu Aarch64 host.

Re: [PATCH v6 00/11] Support disabling TCG on ARM (part 2)

[Claudio Fontana]

On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> Cover from Samuel Ortiz from (part 1) [1]:
> 
>   This patchset allows for building and running ARM targets with TCG
>   disabled. [...]
> 
>   The rationale behind this work comes from the NEMU project where
>   we're trying to only support x86 and ARM 64-bit architectures,
>   without including the TCG code base. We can only do so if we can
>   build and run ARM binaries with TCG disabled.
> 
> Peter mentioned in v5 [6] that since 32-bit host has been removed,
> we have to remove v7 targets. This is not done in this series, as
> linking succeeds, and there is enough material to review (no need
> to spend time on that extra patch if the current approach is not
> accepted).
> 
> CI: https://gitlab.com/philmd/qemu/-/pipelines/249272441
> 
> v6:
> - rebased on "target/arm/Kconfig" series
> - introduce/use tcg_builtin() for realview machines
> 
> v5:
> - addressed Paolo/Richard/Thomas review comments from v4 [5].
> 
> v4 almost 2 years later... [2]:
> - Rebased on Meson
> - Addressed Richard review comments
> - Addressed Claudio review comments
> 
> v3 almost 18 months later [3]:
> - Rebased
> - Addressed Thomas review comments
> - Added Travis-CI job to keep building --disable-tcg on ARM
> 
> v2 [4]:
> - Addressed review comments from Richard and Thomas from v1 [1]
> 
> Regards,
> 
> Phil.
> 
> [1]: https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg02451.html
> [2]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg689168.html
> [3]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg641796.html
> [4]: https://lists.gnu.org/archive/html/qemu-devel/2019-08/msg05003.html
> [5]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg746041.html
> [6]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg777669.html
> 
> Based-on: <20210131111316.232778-1-f4bug@amsat.org>
>           "target: Provide target-specific Kconfig"
> 
> Philippe Mathieu-Daudé (9):
>   sysemu/tcg: Introduce tcg_builtin() helper
>   exec: Restrict TCG specific headers
>   target/arm: Restrict ARMv4 cpus to TCG accel
>   target/arm: Restrict ARMv5 cpus to TCG accel
>   target/arm: Restrict ARMv6 cpus to TCG accel
>   target/arm: Restrict ARMv7 R-profile cpus to TCG accel
>   target/arm: Restrict ARMv7 M-profile cpus to TCG accel
>   target/arm: Reorder meson.build rules
>   .travis.yml: Add a KVM-only Aarch64 job
> 
> Samuel Ortiz (1):
>   target/arm: Do not build TCG objects when TCG is off
> 
> Thomas Huth (1):
>   target/arm: Make m_helper.c optional via CONFIG_ARM_V7M
> 
>  default-configs/devices/aarch64-softmmu.mak |  1 -
>  default-configs/devices/arm-softmmu.mak     | 27 --------
>  include/exec/helper-proto.h                 |  2 +
>  include/sysemu/tcg.h                        |  2 +
>  target/arm/cpu.h                            | 12 ----
>  hw/arm/realview.c                           |  7 +-
>  target/arm/cpu_tcg.c                        |  4 +-
>  target/arm/helper.c                         |  7 --
>  target/arm/m_helper-stub.c                  | 73 +++++++++++++++++++++
>  tests/qtest/cdrom-test.c                    |  6 +-
>  .travis.yml                                 | 32 +++++++++
>  hw/arm/Kconfig                              | 38 +++++++++++
>  target/arm/Kconfig                          | 17 +++++
>  target/arm/meson.build                      | 28 +++++---
>  14 files changed, 196 insertions(+), 60 deletions(-)
>  create mode 100644 target/arm/m_helper-stub.c
> 

Looking at this series, just my 2 cents on how I would suggest to go forward:
I could again split my series in two parts, with only the TCG Ops in the first part.

Then this series could be merged, enabling --disable-tcg for ARM,

then I could extend the second part of my series to include ARM as well.

Wdyt? (Probably Richard?)

Thanks,

Claudio

Re: [PATCH v6 00/11] Support disabling TCG on ARM (part 2)

[Philippe Mathieu-Daudé]

On 1/31/21 3:40 PM, Claudio Fontana wrote:
> On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
>> Cover from Samuel Ortiz from (part 1) [1]:
>>
>>   This patchset allows for building and running ARM targets with TCG
>>   disabled. [...]
>>
>>   The rationale behind this work comes from the NEMU project where
>>   we're trying to only support x86 and ARM 64-bit architectures,
>>   without including the TCG code base. We can only do so if we can
>>   build and run ARM binaries with TCG disabled.
>>
>> Peter mentioned in v5 [6] that since 32-bit host has been removed,
>> we have to remove v7 targets. This is not done in this series, as
>> linking succeeds, and there is enough material to review (no need
>> to spend time on that extra patch if the current approach is not
>> accepted).
>>
>> CI: https://gitlab.com/philmd/qemu/-/pipelines/249272441
>>
>> v6:
>> - rebased on "target/arm/Kconfig" series
>> - introduce/use tcg_builtin() for realview machines
>>
>> v5:
>> - addressed Paolo/Richard/Thomas review comments from v4 [5].
>>
>> v4 almost 2 years later... [2]:
>> - Rebased on Meson
>> - Addressed Richard review comments
>> - Addressed Claudio review comments
>>
>> v3 almost 18 months later [3]:
>> - Rebased
>> - Addressed Thomas review comments
>> - Added Travis-CI job to keep building --disable-tcg on ARM
>>
>> v2 [4]:
>> - Addressed review comments from Richard and Thomas from v1 [1]
>>
>> Regards,
>>
>> Phil.
>>
>> [1]: https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg02451.html
>> [2]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg689168.html
>> [3]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg641796.html
>> [4]: https://lists.gnu.org/archive/html/qemu-devel/2019-08/msg05003.html
>> [5]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg746041.html
>> [6]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg777669.html
>>
>> Based-on: <20210131111316.232778-1-f4bug@amsat.org>
>>           "target: Provide target-specific Kconfig"
>>
>> Philippe Mathieu-Daudé (9):
>>   sysemu/tcg: Introduce tcg_builtin() helper
>>   exec: Restrict TCG specific headers
>>   target/arm: Restrict ARMv4 cpus to TCG accel
>>   target/arm: Restrict ARMv5 cpus to TCG accel
>>   target/arm: Restrict ARMv6 cpus to TCG accel
>>   target/arm: Restrict ARMv7 R-profile cpus to TCG accel
>>   target/arm: Restrict ARMv7 M-profile cpus to TCG accel
>>   target/arm: Reorder meson.build rules
>>   .travis.yml: Add a KVM-only Aarch64 job
>>
>> Samuel Ortiz (1):
>>   target/arm: Do not build TCG objects when TCG is off
>>
>> Thomas Huth (1):
>>   target/arm: Make m_helper.c optional via CONFIG_ARM_V7M
>>
>>  default-configs/devices/aarch64-softmmu.mak |  1 -
>>  default-configs/devices/arm-softmmu.mak     | 27 --------
>>  include/exec/helper-proto.h                 |  2 +
>>  include/sysemu/tcg.h                        |  2 +
>>  target/arm/cpu.h                            | 12 ----
>>  hw/arm/realview.c                           |  7 +-
>>  target/arm/cpu_tcg.c                        |  4 +-
>>  target/arm/helper.c                         |  7 --
>>  target/arm/m_helper-stub.c                  | 73 +++++++++++++++++++++
>>  tests/qtest/cdrom-test.c                    |  6 +-
>>  .travis.yml                                 | 32 +++++++++
>>  hw/arm/Kconfig                              | 38 +++++++++++
>>  target/arm/Kconfig                          | 17 +++++
>>  target/arm/meson.build                      | 28 +++++---
>>  14 files changed, 196 insertions(+), 60 deletions(-)
>>  create mode 100644 target/arm/m_helper-stub.c
>>
> 
> Looking at this series, just my 2 cents on how I would suggest to go forward:
> I could again split my series in two parts, with only the TCG Ops in the first part.
> 
> Then this series could be merged, enabling --disable-tcg for ARM,
> 
> then I could extend the second part of my series to include ARM as well.
> 
> Wdyt? (Probably Richard?)

¯\_(ツ)_/¯

I respun because Richard unqueue your series, and it looks
there is no big clashing.

Anyhow meanwhile peer review is useful, and thanks for yours ;)

> 
> Thanks,
> 
> Claudio
> 
> 
> 
>