qemu-arm.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Mohamed Mediouni <mohamed@unpredictable.fr>
To: qemu-devel@nongnu.org
Cc: "Daniel P. Berrangé" <berrange@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Sunil Muthuswamy" <sunilmut@microsoft.com>,
	"Marc-André Lureau" <marcandre.lureau@redhat.com>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	qemu-arm@nongnu.org,
	"Mohamed Mediouni" <mohamed@unpredictable.fr>
Subject: [RFC 0/9] WHPX support for Arm
Date: Thu, 31 Jul 2025 07:27:44 +0200	[thread overview]
Message-ID: <20250731052753.93255-1-mohamed@unpredictable.fr> (raw)

This one took way longer for me to publish than I should have.

There are a number of lingering bugs in this one including u-boot not working.

Interrupt controller save/restore is entirely missing in this RFC, and some other state
bits are likely still missing too.

ITS not blocked by default yet, remember to use its=off when testing this series.
You might also want the GICv3 + GICv2m support patch as part of the HVF vGIC patch series, which
is not duplicated here.

PS: on both this and HVF, interrupt controller initialisation needs to be done early so I ended
up with hardcoded addresses. Wonder if the right way to go might be to defer virt and vCPU initialisation
until late in the process post-gic_realize...

Other than that, this boots both EDK2 and Linux in SMP, when using devicetree or ACPI.

Mohamed Mediouni (9):
  whpx: Move around files before introducing AArch64 support
  whpx: reshuffle common code
  whpx: common: use whpx_cpu_instance_init on x86 only
  whpx: interrupt controller support
  hw/virt: make Qemu aware that WHPX has a vGICv3
  hw: intc: arm_gicv3_common: add whpx
  whpx: add arm64 support
  whpx: copy over memory tracking logic from hvf
  target/arm: cpu: mark WHPX as supporting PSCI 1.1

 accel/meson.build                             |   1 +
 accel/whpx/meson.build                        |   7 +
 {target/i386 => accel}/whpx/whpx-accel-ops.c  |   8 +-
 accel/whpx/whpx-common.c                      | 670 ++++++++++++++++
 hw/arm/virt.c                                 |   3 +
 hw/intc/arm_gicv3_common.c                    |   3 +
 hw/intc/arm_gicv3_whpx.c                      | 285 +++++++
 hw/intc/meson.build                           |   1 +
 .../whpx => include/system}/whpx-accel-ops.h  |   4 +-
 include/system/whpx-all.h                     |  12 +
 include/system/whpx-common.h                  |  22 +
 .../whpx => include/system}/whpx-internal.h   |  11 +-
 meson.build                                   |   5 +-
 target/arm/cpu.c                              |   3 +-
 target/arm/meson.build                        |   1 +
 target/arm/whpx/meson.build                   |   3 +
 target/arm/whpx/whpx-all.c                    | 744 ++++++++++++++++++
 target/i386/whpx/meson.build                  |   1 -
 target/i386/whpx/whpx-all.c                   | 524 +-----------
 target/i386/whpx/whpx-apic.c                  |   2 +-
 20 files changed, 1780 insertions(+), 530 deletions(-)
 create mode 100644 accel/whpx/meson.build
 rename {target/i386 => accel}/whpx/whpx-accel-ops.c (96%)
 create mode 100644 accel/whpx/whpx-common.c
 create mode 100644 hw/intc/arm_gicv3_whpx.c
 rename {target/i386/whpx => include/system}/whpx-accel-ops.h (92%)
 create mode 100644 include/system/whpx-all.h
 create mode 100644 include/system/whpx-common.h
 rename {target/i386/whpx => include/system}/whpx-internal.h (97%)
 create mode 100644 target/arm/whpx/meson.build
 create mode 100644 target/arm/whpx/whpx-all.c

-- 
2.39.5 (Apple Git-154)



             reply	other threads:[~2025-07-31  5:35 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-31  5:27 Mohamed Mediouni [this message]
2025-07-31  5:27 ` [RFC 1/9] whpx: Move around files before introducing AArch64 support Mohamed Mediouni
2025-07-31  8:27   ` Philippe Mathieu-Daudé
2025-08-01  5:44   ` Richard Henderson
2025-07-31  5:27 ` [RFC 2/9] whpx: reshuffle common code Mohamed Mediouni
2025-07-31  5:27 ` [RFC 3/9] whpx: common: use whpx_cpu_instance_init on x86 only Mohamed Mediouni
2025-07-31  8:30   ` Philippe Mathieu-Daudé
2025-07-31  5:27 ` [RFC 4/9] whpx: interrupt controller support Mohamed Mediouni
2025-07-31  5:27 ` [RFC 5/9] hw/virt: make Qemu aware that WHPX has a vGICv3 Mohamed Mediouni
2025-07-31  8:35   ` Philippe Mathieu-Daudé
2025-07-31 14:47     ` Mohamed Mediouni
2025-07-31  5:27 ` [RFC 6/9] hw: intc: arm_gicv3_common: add whpx Mohamed Mediouni
2025-07-31  8:33   ` Philippe Mathieu-Daudé
2025-07-31  5:27 ` [RFC 7/9] whpx: add arm64 support Mohamed Mediouni
2025-07-31  5:27 ` [RFC 8/9] whpx: copy over memory tracking logic from hvf Mohamed Mediouni
2025-07-31  5:27 ` [RFC 9/9] target/arm: cpu: mark WHPX as supporting PSCI 1.1 Mohamed Mediouni
2025-08-01  1:15 ` [RFC 0/9] WHPX support for Arm Pierrick Bouvier
2025-08-01 12:43   ` Mohamed Mediouni
2025-08-01 17:22     ` Pierrick Bouvier
2025-08-01 18:52       ` Mohamed Mediouni
2025-08-01 19:16         ` Pierrick Bouvier
2025-08-01 19:31           ` Mohamed Mediouni
2025-08-01 19:42             ` Pierrick Bouvier
2025-08-01 19:57               ` Mohamed Mediouni
2025-08-01 20:10                 ` Pierrick Bouvier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250731052753.93255-1-mohamed@unpredictable.fr \
    --to=mohamed@unpredictable.fr \
    --cc=berrange@redhat.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=sunilmut@microsoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).