From: Jamin Lin <jamin_lin@aspeedtech.com>
To: "Daniel P. Berrangé" <berrange@redhat.com>,
"Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Kane Chen" <kane_chen@aspeedtech.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>, "Eric Blake" <eblake@redhat.com>,
"Markus Armbruster" <armbru@redhat.com>,
"Fabiano Rosas" <farosas@suse.de>,
"Laurent Vivier" <lvivier@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"open list:All patches CC here" <qemu-devel@nongnu.org>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>
Cc: Jamin Lin <jamin_lin@aspeedtech.com>, Troy Lee <troy_lee@aspeedtech.com>
Subject: [PATCH v2 02/17] tests/qtest/aspeed-hace: Test the crypto command on the AST2500
Date: Wed, 15 Jul 2026 03:33:16 +0000 [thread overview]
Message-ID: <20260715033311.1648424-3-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20260715033311.1648424-1-jamin_lin@aspeedtech.com>
Add a crypto known-answer test harness and exercise the AST2500, which
uses the crypto engine's direct access mode. Each mode (AES/DES/3DES in
ECB and CBC) is a separate test that checks the ciphertext, the
plaintext round-trip and, for CBC, the chaining IV written back to the
context buffer.
The key/IV/plaintext/ciphertext values are taken verbatim from the Linux
kernel crypto self-test templates in crypto/testmgr.h.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
tests/qtest/aspeed-hace-utils.h | 16 ++
tests/qtest/aspeed-hace-utils.c | 325 ++++++++++++++++++++++++++++++++
tests/qtest/aspeed_hace-test.c | 6 +
tests/qtest/meson.build | 6 +-
4 files changed, 351 insertions(+), 2 deletions(-)
diff --git a/tests/qtest/aspeed-hace-utils.h b/tests/qtest/aspeed-hace-utils.h
index 27ab2bb975..13feaa61e4 100644
--- a/tests/qtest/aspeed-hace-utils.h
+++ b/tests/qtest/aspeed-hace-utils.h
@@ -79,5 +79,21 @@ void aspeed_test_sha512_accum(const char *machine, const uint32_t base,
void aspeed_test_addresses(const char *machine, const uint32_t base,
const struct AspeedMasks *expected);
+/*
+ * Cipher modes a SoC's crypto engine supports, for aspeed_add_crypto_tests().
+ */
+enum {
+ CRYPT_MODE_ECB = 1 << 0,
+ CRYPT_MODE_CBC = 1 << 1,
+};
+
+/*
+ * Register the crypto known-answer tests that @modes selects (a mask of
+ * CRYPT_MODE_*) for the given machine. Each test is named
+ * "<prefix>/hace/crypto/<mode>".
+ */
+void aspeed_add_crypto_tests(const char *prefix, const char *machine,
+ uint32_t base, uint64_t dram, uint32_t modes);
+
#endif /* TESTS_ASPEED_HACE_UTILS_H */
diff --git a/tests/qtest/aspeed-hace-utils.c b/tests/qtest/aspeed-hace-utils.c
index 25450a296b..0355dd47af 100644
--- a/tests/qtest/aspeed-hace-utils.c
+++ b/tests/qtest/aspeed-hace-utils.c
@@ -9,6 +9,7 @@
#include "libqtest.h"
#include "qemu/bitops.h"
#include "qemu/bswap.h"
+#include "crypto/cipher.h"
#include "aspeed-hace-utils.h"
/*
@@ -645,3 +646,327 @@ void aspeed_test_addresses(const char *machine, const uint32_t base,
qtest_quit(s);
}
+/*
+ * Crypto engine register layout (offsets from the HACE base).
+ */
+#define HACE_CRYPTO_SRC 0x00
+#define HACE_CRYPTO_DEST 0x04
+#define HACE_CRYPTO_CONTEXT 0x08
+#define HACE_CRYPTO_DATA_LEN 0x0c
+#define HACE_CRYPTO_CMD 0x10
+
+/* Crypto command bits */
+#define HACE_CMD_ENCRYPT BIT(7)
+#define HACE_CMD_ISR_EN BIT(12)
+#define HACE_CMD_DES_SELECT BIT(16)
+#define HACE_CMD_TRIPLE_DES BIT(17)
+#define HACE_CMD_SRC_SG_CTRL BIT(18)
+#define HACE_CMD_DST_SG_CTRL BIT(19)
+#define HACE_CMD_OP_MODE_MASK (0x7 << 4)
+#define HACE_CMD_ECB (0x0 << 4)
+#define HACE_CMD_CBC (0x1 << 4)
+#define HACE_CMD_AES128 (0x0 << 2)
+
+/* Context buffer layout: IV (DES at +8), key at +0x10 */
+#define HACE_CTX_KEY_OFFSET 0x10
+#define HACE_CTX_SIZE 0x30
+
+/*
+ * Crypto known-answer test vectors, taken verbatim from the Linux kernel
+ * crypto self-test templates in crypto/testmgr.h:
+ *
+ * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/crypto/testmgr.h?h=v6.18
+ *
+ * The originating template is noted above each block. CTR and the longer CBC
+ * vectors are truncated to a single block (still a valid known-answer test as
+ * the first block only depends on the IV).
+ */
+
+/* aes_tv_template[0] (FIPS-197) */
+static const uint8_t aes128_ecb_key[16] = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f };
+static const uint8_t aes128_ecb_ptext[16] = {
+ 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+ 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff };
+static const uint8_t aes128_ecb_ctext[16] = {
+ 0x69, 0xc4, 0xe0, 0xd8, 0x6a, 0x7b, 0x04, 0x30,
+ 0xd8, 0xcd, 0xb7, 0x80, 0x70, 0xb4, 0xc5, 0x5a };
+
+/* aes_cbc_tv_template[0] (RFC 3602) */
+static const uint8_t aes128_cbc_key[16] = {
+ 0x06, 0xa9, 0x21, 0x40, 0x36, 0xb8, 0xa1, 0x5b,
+ 0x51, 0x2e, 0x03, 0xd5, 0x34, 0x12, 0x00, 0x06 };
+static const uint8_t aes128_cbc_iv[16] = {
+ 0x3d, 0xaf, 0xba, 0x42, 0x9d, 0x9e, 0xb4, 0x30,
+ 0xb4, 0x22, 0xda, 0x80, 0x2c, 0x9f, 0xac, 0x41 };
+static const uint8_t aes128_cbc_ptext[16] = {
+ 0x53, 0x69, 0x6e, 0x67, 0x6c, 0x65, 0x20, 0x62,
+ 0x6c, 0x6f, 0x63, 0x6b, 0x20, 0x6d, 0x73, 0x67 };
+static const uint8_t aes128_cbc_ctext[16] = {
+ 0xe3, 0x53, 0x77, 0x9c, 0x10, 0x79, 0xae, 0xb8,
+ 0x27, 0x08, 0x94, 0x2d, 0xbe, 0x77, 0x18, 0x1a };
+static const uint8_t aes128_cbc_ivout[16] = {
+ 0xe3, 0x53, 0x77, 0x9c, 0x10, 0x79, 0xae, 0xb8,
+ 0x27, 0x08, 0x94, 0x2d, 0xbe, 0x77, 0x18, 0x1a };
+
+/* des_tv_template[0] (Applied Cryptography) */
+static const uint8_t des_ecb_key[8] = {
+ 0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef };
+static const uint8_t des_ecb_ptext[8] = {
+ 0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xe7 };
+static const uint8_t des_ecb_ctext[8] = {
+ 0xc9, 0x57, 0x44, 0x25, 0x6a, 0x5e, 0xd3, 0x1d };
+
+/* des_cbc_tv_template[0] (OpenSSL), first block */
+static const uint8_t des_cbc_key[8] = {
+ 0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef };
+static const uint8_t des_cbc_iv[8] = {
+ 0xfe, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10 };
+static const uint8_t des_cbc_ptext[8] = {
+ 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0x20 };
+static const uint8_t des_cbc_ctext[8] = {
+ 0xcc, 0xd1, 0x73, 0xff, 0xab, 0x20, 0x39, 0xf4 };
+
+/* des3_ede_tv_template[0] (OpenSSL) */
+static const uint8_t tdes_ecb_key[24] = {
+ 0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef,
+ 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55,
+ 0xfe, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10 };
+static const uint8_t tdes_ecb_ptext[8] = {
+ 0x73, 0x6f, 0x6d, 0x65, 0x64, 0x61, 0x74, 0x61 };
+static const uint8_t tdes_ecb_ctext[8] = {
+ 0x18, 0xd7, 0x48, 0xe5, 0x63, 0x62, 0x05, 0x72 };
+
+/* des3_ede_cbc_tv_template[0] (OpenSSL), first block */
+static const uint8_t tdes_cbc_key[24] = {
+ 0xe9, 0xc0, 0xff, 0x2e, 0x76, 0x0b, 0x64, 0x24,
+ 0x44, 0x4d, 0x99, 0x5a, 0x12, 0xd6, 0x40, 0xc0,
+ 0xea, 0xc2, 0x84, 0xe8, 0x14, 0x95, 0xdb, 0xe8 };
+static const uint8_t tdes_cbc_iv[8] = {
+ 0x7d, 0x33, 0x88, 0x93, 0x0f, 0x93, 0xb2, 0x42 };
+static const uint8_t tdes_cbc_ptext[8] = {
+ 0x6f, 0x54, 0x20, 0x6f, 0x61, 0x4d, 0x79, 0x6e };
+static const uint8_t tdes_cbc_ctext[8] = {
+ 0x0e, 0x2d, 0xb6, 0x97, 0x3c, 0x56, 0x33, 0xf4 };
+
+typedef struct CryptTest {
+ QCryptoCipherMode mode;
+ QCryptoCipherAlgo alg;
+ /* expected context IV after encrypt, or NULL */
+ const uint8_t *iv_out;
+ const uint8_t *ptext;
+ const uint8_t *ctext;
+ const uint8_t *key;
+ const uint8_t *iv;
+ const char *name;
+ size_t keylen;
+ /* algorithm | mode | key size selection */
+ uint32_t cmd;
+ size_t ivlen;
+ size_t len;
+} CryptTest;
+
+static const CryptTest crypt_tests[] = {
+ {
+ .name = "aes128-ecb",
+ .cmd = HACE_CMD_AES128 | HACE_CMD_ECB,
+ .alg = QCRYPTO_CIPHER_ALGO_AES_128,
+ .mode = QCRYPTO_CIPHER_MODE_ECB,
+ .key = aes128_ecb_key,
+ .keylen = sizeof(aes128_ecb_key),
+ .ptext = aes128_ecb_ptext,
+ .ctext = aes128_ecb_ctext,
+ .len = sizeof(aes128_ecb_ptext),
+ },
+ {
+ .name = "aes128-cbc",
+ .cmd = HACE_CMD_AES128 | HACE_CMD_CBC,
+ .alg = QCRYPTO_CIPHER_ALGO_AES_128,
+ .mode = QCRYPTO_CIPHER_MODE_CBC,
+ .key = aes128_cbc_key,
+ .keylen = sizeof(aes128_cbc_key),
+ .iv = aes128_cbc_iv,
+ .ivlen = sizeof(aes128_cbc_iv),
+ .ptext = aes128_cbc_ptext,
+ .ctext = aes128_cbc_ctext,
+ .iv_out = aes128_cbc_ivout,
+ .len = sizeof(aes128_cbc_ptext),
+ },
+ {
+ .name = "des-ecb",
+ .cmd = HACE_CMD_DES_SELECT | HACE_CMD_ECB,
+ .alg = QCRYPTO_CIPHER_ALGO_DES,
+ .mode = QCRYPTO_CIPHER_MODE_ECB,
+ .key = des_ecb_key,
+ .keylen = sizeof(des_ecb_key),
+ .ptext = des_ecb_ptext,
+ .ctext = des_ecb_ctext,
+ .len = sizeof(des_ecb_ptext),
+ },
+ {
+ .name = "des-cbc",
+ .cmd = HACE_CMD_DES_SELECT | HACE_CMD_CBC,
+ .alg = QCRYPTO_CIPHER_ALGO_DES,
+ .mode = QCRYPTO_CIPHER_MODE_CBC,
+ .key = des_cbc_key,
+ .keylen = sizeof(des_cbc_key),
+ .iv = des_cbc_iv,
+ .ivlen = sizeof(des_cbc_iv),
+ .ptext = des_cbc_ptext,
+ .ctext = des_cbc_ctext,
+ .len = sizeof(des_cbc_ptext),
+ },
+ {
+ .name = "des3_ede-ecb",
+ .cmd = HACE_CMD_DES_SELECT | HACE_CMD_TRIPLE_DES | HACE_CMD_ECB,
+ .alg = QCRYPTO_CIPHER_ALGO_3DES,
+ .mode = QCRYPTO_CIPHER_MODE_ECB,
+ .key = tdes_ecb_key,
+ .keylen = sizeof(tdes_ecb_key),
+ .ptext = tdes_ecb_ptext,
+ .ctext = tdes_ecb_ctext,
+ .len = sizeof(tdes_ecb_ptext),
+ },
+ {
+ .name = "des3_ede-cbc",
+ .cmd = HACE_CMD_DES_SELECT | HACE_CMD_TRIPLE_DES | HACE_CMD_CBC,
+ .alg = QCRYPTO_CIPHER_ALGO_3DES,
+ .mode = QCRYPTO_CIPHER_MODE_CBC,
+ .key = tdes_cbc_key,
+ .keylen = sizeof(tdes_cbc_key),
+ .iv = tdes_cbc_iv,
+ .ivlen = sizeof(tdes_cbc_iv),
+ .ptext = tdes_cbc_ptext,
+ .ctext = tdes_cbc_ctext,
+ .len = sizeof(tdes_cbc_ptext),
+ },
+};
+
+/* DRAM offsets for the crypto test source, destination and context buffers. */
+#define CRYPT_OFF_SRC 0x10000
+#define CRYPT_OFF_DST 0x20000
+#define CRYPT_OFF_CTX 0x30000
+
+/* Describes one registered crypto test (qtest_add_data_func() data pointer). */
+typedef struct AspeedCryptoTest {
+ const char *machine;
+ uint64_t dram;
+ uint32_t base;
+ int index;
+} AspeedCryptoTest;
+
+/* Map a command's operation mode (HACE10[6:4]) to a CRYPT_MODE_* flag. */
+static uint32_t crypt_mode_flag(uint32_t cmd)
+{
+ switch (cmd & HACE_CMD_OP_MODE_MASK) {
+ case HACE_CMD_ECB:
+ return CRYPT_MODE_ECB;
+ case HACE_CMD_CBC:
+ return CRYPT_MODE_CBC;
+ default:
+ return 0;
+ }
+}
+
+static void crypt_write_ctx(QTestState *s, uint64_t ctx_addr,
+ const CryptTest *t)
+{
+ size_t iv_off = (t->cmd & HACE_CMD_DES_SELECT) ? 8 : 0;
+ uint8_t ctx[HACE_CTX_SIZE] = { 0 };
+
+ if (t->iv) {
+ memcpy(ctx + iv_off, t->iv, t->ivlen);
+ }
+ memcpy(ctx + HACE_CTX_KEY_OFFSET, t->key, t->keylen);
+ qtest_memwrite(s, ctx_addr, ctx, sizeof(ctx));
+}
+
+/* Run one crypto operation in direct access mode and read back the result. */
+static void crypt_run_direct(QTestState *s, uint32_t base, uint64_t dram,
+ const CryptTest *t, bool encrypt, uint8_t *out)
+{
+ const uint8_t *in = encrypt ? t->ptext : t->ctext;
+ uint32_t cmd = t->cmd | HACE_CMD_ISR_EN;
+ uint64_t src = dram + CRYPT_OFF_SRC;
+ uint64_t dst = dram + CRYPT_OFF_DST;
+ uint64_t ctx = dram + CRYPT_OFF_CTX;
+
+ if (encrypt) {
+ cmd |= HACE_CMD_ENCRYPT;
+ }
+
+ crypt_write_ctx(s, ctx, t);
+ qtest_memwrite(s, src, in, t->len);
+
+ qtest_writel(s, base + HACE_CRYPTO_SRC, (uint32_t)src);
+ qtest_writel(s, base + HACE_CRYPTO_DEST, (uint32_t)dst);
+ qtest_writel(s, base + HACE_CRYPTO_CONTEXT, (uint32_t)ctx);
+ qtest_writel(s, base + HACE_CRYPTO_DATA_LEN, t->len);
+ qtest_writel(s, base + HACE_CRYPTO_CMD, cmd);
+
+ g_assert_cmphex(qtest_readl(s, base + HACE_STS) & HACE_CRYPTO_ISR, ==,
+ HACE_CRYPTO_ISR);
+ qtest_writel(s, base + HACE_STS, HACE_CRYPTO_ISR);
+
+ qtest_memread(s, dst, out, t->len);
+}
+
+static void aspeed_test_crypto_direct(const void *data)
+{
+ const AspeedCryptoTest *c = data;
+ const CryptTest *t = &crypt_tests[c->index];
+ QTestState *s = qtest_init(c->machine);
+ uint8_t out[64];
+ uint8_t iv[16];
+ size_t iv_off;
+
+ g_assert_cmpuint(t->len, <=, sizeof(out));
+
+ /* Encrypt: ptext -> ctext */
+ crypt_run_direct(s, c->base, c->dram, t, true, out);
+ g_assert_cmpmem(out, t->len, t->ctext, t->len);
+
+ if (t->iv_out) {
+ iv_off = (t->cmd & HACE_CMD_DES_SELECT) ? 8 : 0;
+ qtest_memread(s, c->dram + CRYPT_OFF_CTX + iv_off, iv, t->ivlen);
+ g_assert_cmpmem(iv, t->ivlen, t->iv_out, t->ivlen);
+ }
+
+ /* Decrypt: ctext -> ptext */
+ crypt_run_direct(s, c->base, c->dram, t, false, out);
+ g_assert_cmpmem(out, t->len, t->ptext, t->len);
+
+ qtest_quit(s);
+}
+
+void aspeed_add_crypto_tests(const char *prefix, const char *machine,
+ uint32_t base, uint64_t dram, uint32_t modes)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(crypt_tests); i++) {
+ g_autofree char *path = NULL;
+ AspeedCryptoTest *t;
+
+ if (!(modes & crypt_mode_flag(crypt_tests[i].cmd))) {
+ continue;
+ }
+
+ if (!qcrypto_cipher_supports(crypt_tests[i].alg,
+ crypt_tests[i].mode)) {
+ g_printerr("# skip unsupported %s\n", crypt_tests[i].name);
+ continue;
+ }
+
+ path = g_strdup_printf("%s/hace/crypto/%s", prefix,
+ crypt_tests[i].name);
+ t = g_new0(AspeedCryptoTest, 1);
+ t->machine = machine;
+ t->base = base;
+ t->dram = dram;
+ t->index = i;
+ qtest_add_data_func_full(path, t, aspeed_test_crypto_direct, g_free);
+ }
+}
+
diff --git a/tests/qtest/aspeed_hace-test.c b/tests/qtest/aspeed_hace-test.c
index 38777020ca..4cb4c475e9 100644
--- a/tests/qtest/aspeed_hace-test.c
+++ b/tests/qtest/aspeed_hace-test.c
@@ -229,6 +229,12 @@ int main(int argc, char **argv)
qtest_add_func("ast2500/hace/sha256", test_sha256_ast2500);
qtest_add_func("ast2500/hace/md5", test_md5_ast2500);
+ /*
+ * The AST2500 crypto engine uses direct access mode and supports ECB/CBC.
+ */
+ aspeed_add_crypto_tests("ast2500", "-machine ast2500-evb", 0x1e6e3000,
+ 0x80000000, CRYPT_MODE_ECB | CRYPT_MODE_CBC);
+
qtest_add_func("ast2400/hace/addresses", test_addresses_ast2400);
qtest_add_func("ast2400/hace/sha512", test_sha512_ast2400);
qtest_add_func("ast2400/hace/sha256", test_sha256_ast2400);
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 56ff860e21..d5bde77689 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -389,9 +389,11 @@ if get_option('replication').allowed()
endif
qtests = {
- 'aspeed_hace-test': files('aspeed-hace-utils.c', 'aspeed_hace-test.c'),
+ 'aspeed_hace-test': [files('aspeed-hace-utils.c', 'aspeed_hace-test.c'),
+ crypto],
'aspeed_smc-test': files('aspeed-smc-utils.c', 'aspeed_smc-test.c'),
- 'ast2700-hace-test': files('aspeed-hace-utils.c', 'ast2700-hace-test.c'),
+ 'ast2700-hace-test': [files('aspeed-hace-utils.c', 'ast2700-hace-test.c'),
+ crypto],
'ast2700-smc-test': files('aspeed-smc-utils.c', 'ast2700-smc-test.c'),
'bios-tables-test': [io, 'boot-sector.c', 'acpi-utils.c', 'tpm-emu.c'],
'cdrom-test': files('boot-sector.c'),
--
2.43.0
next prev parent reply other threads:[~2026-07-15 3:37 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-15 3:33 [PATCH v2 00/17] Support the ASPEED HACE crypto command Jamin Lin
2026-07-15 3:33 ` [PATCH v2 01/17] hw/misc/aspeed_hace: Support the crypto command in direct access mode Jamin Lin
2026-07-15 3:33 ` Jamin Lin [this message]
2026-07-15 3:33 ` [PATCH v2 03/17] hw/misc/aspeed_hace: Support scatter-gather mode for the crypto command Jamin Lin
2026-07-15 3:33 ` [PATCH v2 04/17] hw/misc/aspeed_hace: Support the CTR " Jamin Lin
2026-07-15 3:33 ` [PATCH v2 05/17] tests/qtest/aspeed-hace: Test the crypto command on the AST2600 Jamin Lin
2026-07-15 3:33 ` [PATCH v2 06/17] tests/qtest/aspeed-hace: Test the crypto command on the AST1030 Jamin Lin
2026-07-15 3:33 ` [PATCH v2 07/17] crypto/cipher: Add GCM to QCryptoCipherMode Jamin Lin
2026-07-15 4:51 ` Markus Armbruster
2026-07-15 3:33 ` [PATCH v2 08/17] crypto/cipher: Add setaad/gettag for AEAD modes Jamin Lin
2026-07-15 3:33 ` [PATCH v2 09/17] crypto/cipher-gcrypt: Implement AES-GCM Jamin Lin
2026-07-15 3:33 ` [PATCH v2 10/17] crypto/cipher-nettle: " Jamin Lin
2026-07-15 3:33 ` [PATCH v2 11/17] crypto/cipher-gnutls: " Jamin Lin
2026-07-15 3:33 ` [PATCH v2 12/17] tests/unit/test-crypto-cipher: Test AES-GCM mode Jamin Lin
2026-07-15 3:33 ` [PATCH v2 13/17] hw/misc/aspeed_hace: Support 64-bit DMA for the crypto command Jamin Lin
2026-07-15 3:33 ` [PATCH v2 14/17] hw/misc/aspeed_hace: Support the AES-GCM mode " Jamin Lin
2026-07-15 3:33 ` [PATCH v2 15/17] hw/misc/aspeed_hace: Enable the crypto command on the AST2700 Jamin Lin
2026-07-15 3:33 ` [PATCH v2 16/17] tests/qtest/aspeed-hace: Test " Jamin Lin
2026-07-15 3:33 ` [PATCH v2 17/17] tests/functional/aarch64/test_aspeed_ast2700: Drop the AST2700 crypto self-test workaround Jamin Lin
2026-07-20 5:51 ` Cédric Le Goater
2026-07-20 5:57 ` Jamin Lin
2026-07-20 6:29 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260715033311.1648424-3-jamin_lin@aspeedtech.com \
--to=jamin_lin@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=armbru@redhat.com \
--cc=berrange@redhat.com \
--cc=clg@kaod.org \
--cc=eblake@redhat.com \
--cc=farosas@suse.de \
--cc=joel@jms.id.au \
--cc=kane_chen@aspeedtech.com \
--cc=leetroy@gmail.com \
--cc=lvivier@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox