QEMU-Arm Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jamin Lin <jamin_lin@aspeedtech.com>
To: "junjie.cao@linux.dev" <junjie.cao@linux.dev>,
	"junjie.cao@intel.com" <junjie.cao@intel.com>,
	"marcandre.lureau@redhat.com" <marcandre.lureau@redhat.com>,
	"Cédric Le Goater" <clg@kaod.org>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Kane Chen" <kane_chen@aspeedtech.com>,
	"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
	"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: Jamin Lin <jamin_lin@aspeedtech.com>, Troy Lee <troy_lee@aspeedtech.com>
Subject: [PATCH v6 4/8] hw/usb/redirect-server: Announce the exported device
Date: Mon, 19 Oct 2026 09:24:54 +0000	[thread overview]
Message-ID: <20261019092448.278079-5-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20261019092448.278079-1-jamin_lin@aspeedtech.com>

Send device_connect when a device is attached and the host has greeted
us, device_disconnect when it goes away, and handle the bus reset the
host sends before enumerating.

device_connect carries no identity. The peer asks the device itself with
GET_DESCRIPTOR as soon as it enumerates, so anything we put there would
be made up. The speed is real: it comes from the device on our port.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
 hw/usb/redirect-server.c | 130 ++++++++++++++++++++++++++++++++++++++-
 hw/usb/trace-events      |   7 +++
 2 files changed, 136 insertions(+), 1 deletion(-)

diff --git a/hw/usb/redirect-server.c b/hw/usb/redirect-server.c
index d5ec8338df..dc4bb53383 100644
--- a/hw/usb/redirect-server.c
+++ b/hw/usb/redirect-server.c
@@ -56,6 +56,7 @@
 #include "qemu/main-loop.h"
 #include "qemu/module.h"
 #include "migration/vmstate.h"
+#include "qemu/cutils.h"
 #include "hw/core/sysbus.h"
 #include "hw/usb/usb.h"
 #include "chardev/char-fe.h"
@@ -90,12 +91,88 @@ struct USBRedirServer {
     bool in_write;
     guint watch;
     bool host_connected;
+    bool device_announced;
 };
 
+/*
+ * The device is whatever USBDevice the user plugged into our port with
+ * "-device <device>,bus=<id>.0". NULL until then.
+ */
+static USBDevice *usbredir_server_device(USBRedirServer *s)
+{
+    return s->port.dev;
+}
+
+/*
+ * Device announcement
+ */
+
+static uint8_t usbredir_server_speed(USBDevice *device)
+{
+    switch (device->speed) {
+    case USB_SPEED_LOW:
+        return usb_redir_speed_low;
+    case USB_SPEED_FULL:
+        return usb_redir_speed_full;
+    default:
+        return usb_redir_speed_high;
+    }
+}
+
+static void usbredir_server_announce_device(USBRedirServer *s)
+{
+    USBDevice *device = usbredir_server_device(s);
+    struct usb_redir_interface_info_header iface_info = {
+        .interface_count = 0,
+    };
+    struct usb_redir_device_connect_header conn = {};
+
+    if (!s->host_connected || s->device_announced ||
+        !device || !device->attached) {
+        return;
+    }
+    s->device_announced = true;
+    conn.speed = usbredir_server_speed(device);
+
+    /* Put the device in DEFAULT state. The host may not reset the bus. */
+    device->addr = 0;
+    device->state = USB_STATE_DEFAULT;
+
+    /* Send this before device_connect. The peer needs it to accept us. */
+    usbredirparser_send_interface_info(s->parser, &iface_info);
+    usbredirparser_do_write(s->parser);
+
+    trace_usbredir_server_announce(conn.speed);
+    usbredirparser_send_device_connect(s->parser, &conn);
+    usbredirparser_do_write(s->parser);
+}
+
 /*
  * USB port ops
  */
 
+static void usbredir_server_port_attach(USBPort *port)
+{
+    USBRedirServer *s = port->opaque;
+
+    trace_usbredir_server_attach();
+    usbredir_server_announce_device(s);
+}
+
+static void usbredir_server_port_detach(USBPort *port)
+{
+    USBRedirServer *s = port->opaque;
+
+    trace_usbredir_server_detach(s->device_announced);
+
+    if (s->host_connected && s->parser && s->device_announced) {
+        trace_usbredir_server_disconnect();
+        usbredirparser_send_device_disconnect(s->parser);
+        usbredirparser_do_write(s->parser);
+    }
+    s->device_announced = false;
+}
+
 static void usbredir_server_port_child_detach(USBPort *port, USBDevice *child)
 {
     /* We only export the device on our own port. Nothing to do. */
@@ -107,6 +184,8 @@ static void usbredir_server_port_wakeup(USBPort *port)
 }
 
 static USBPortOps usbredir_server_port_ops = {
+    .attach = usbredir_server_port_attach,
+    .detach = usbredir_server_port_detach,
     .child_detach = usbredir_server_port_child_detach,
     .wakeup = usbredir_server_port_wakeup,
 };
@@ -210,13 +289,53 @@ static int usbredir_server_write(void *priv, uint8_t *data, int count)
     return ret;
 }
 
-/* The remote host greets us once the socket is up. */
+/*
+ * usbredirparser message callbacks
+ */
+
 static void usbredir_server_hello(void *priv,
                                   struct usb_redir_hello_header *hello)
 {
     USBRedirServer *s = priv;
+    char version[sizeof(hello->version) + 1];
+
+    pstrcpy(version, sizeof(version), hello->version);
+    trace_usbredir_server_hello(version);
 
     s->host_connected = true;
+    usbredir_server_announce_device(s);
+}
+
+static void usbredir_server_reset(void *priv)
+{
+    USBRedirServer *s = priv;
+    USBDevice *device = usbredir_server_device(s);
+
+    trace_usbredir_server_bus_reset(device && device->attached);
+    usb_device_reset(device);
+}
+
+static void usbredir_server_filter_reject(void *priv)
+{
+    trace_usbredir_server_filter_reject();
+}
+
+static void usbredir_server_filter_filter(void *priv,
+    struct usbredirfilter_rule *rules, int rules_count)
+{
+    /* We accept any host. The callback owns the rules, so free them. */
+    free(rules);
+}
+
+static void usbredir_server_device_disconnect_ack(void *priv)
+{
+    /* The host saw our device_disconnect. Nothing to do. */
+}
+
+static void usbredir_server_interface_info(void *priv,
+    struct usb_redir_interface_info_header *hdr)
+{
+    /* The host should not send this to a device. Nothing to do. */
 }
 
 /*
@@ -240,6 +359,14 @@ static void usbredir_server_create_parser(USBRedirServer *s)
 
     /* Callbacks for messages the remote host sends to us */
     s->parser->hello_func = usbredir_server_hello;
+    s->parser->reset_func = usbredir_server_reset;
+
+    /* The parser calls these directly, so they must not be NULL. */
+    s->parser->filter_reject_func = usbredir_server_filter_reject;
+    s->parser->filter_filter_func = usbredir_server_filter_filter;
+    s->parser->device_disconnect_ack_func =
+        usbredir_server_device_disconnect_ack;
+    s->parser->interface_info_func = usbredir_server_interface_info;
 
     /* Capabilities: 64-bit IDs, connect_device_version, ep_info sizes */
     usbredirparser_caps_set_cap(caps, usb_redir_cap_connect_device_version);
@@ -267,6 +394,7 @@ static void usbredir_server_create_parser(USBRedirServer *s)
 static void usbredir_server_destroy_parser(USBRedirServer *s)
 {
     s->host_connected = false;
+    s->device_announced = false;
 
     g_clear_handle_id(&s->watch, g_source_remove);
 
diff --git a/hw/usb/trace-events b/hw/usb/trace-events
index d141661673..2cc6a244b9 100644
--- a/hw/usb/trace-events
+++ b/hw/usb/trace-events
@@ -399,3 +399,10 @@ usbredir_server_chardev_open(void) "chardev opened"
 usbredir_server_chardev_close(void) "chardev closed"
 usbredir_server_write_recursion(void) "recursive write, leaving it queued"
 usbredir_server_log(const char *msg) "%s"
+usbredir_server_hello(const char *version) "peer is %s"
+usbredir_server_attach(void) "device attached"
+usbredir_server_detach(bool announced) "device detached, was announced %d"
+usbredir_server_announce(uint8_t speed) "device_connect speed %u"
+usbredir_server_disconnect(void) "device_disconnect sent"
+usbredir_server_bus_reset(bool attached) "bus reset, attached %d"
+usbredir_server_filter_reject(void) "host rejected our device"
-- 
2.43.0


  parent reply	other threads:[~2026-10-19  9:26 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-19  9:24 [PATCH v6 0/8] hw/usb: Add a usbredir server transport Jamin Lin
2026-10-19  9:24 ` [PATCH v6 1/8] hw/usb/bus: Let a bus opt out of automatic hub insertion Jamin Lin
2026-10-19 10:27   ` Gerd Hoffmann
2026-10-27  5:39     ` Jamin Lin
2026-10-28 11:34       ` Gerd Hoffmann
2026-10-29  2:05         ` Jamin Lin
2026-10-19  9:24 ` [PATCH v6 2/8] hw/usb/redirect-server: Add a usbredir server device Jamin Lin
2026-10-19  9:24 ` [PATCH v6 3/8] hw/usb/redirect-server: Connect usbredirparser to a chardev Jamin Lin
2026-10-19  9:24 ` Jamin Lin [this message]
2026-10-19  9:24 ` [PATCH v6 5/8] hw/usb/redirect-server: Implement control transfers Jamin Lin
2026-10-19 12:44   ` marcandre.lureau
2026-10-21  5:51     ` Jamin Lin
2026-10-19  9:24 ` [PATCH v6 6/8] hw/usb/redirect-server: Implement bulk and interrupt transfers Jamin Lin
2026-10-19 12:44   ` marcandre.lureau
2026-10-20  7:41     ` Jamin Lin
2026-10-19  9:24 ` [PATCH v6 7/8] hw/usb/redirect-server: Stream interrupt IN endpoints Jamin Lin
2026-10-19 12:44   ` marcandre.lureau
2026-10-20  6:00     ` Jamin Lin
2026-10-22  6:08   ` Junjie Cao
2026-10-22  6:42     ` Jamin Lin
2026-10-19  9:24 ` [PATCH v6 8/8] hw/arm/aspeed: Enable the usbredir server transport Jamin Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261019092448.278079-5-jamin_lin@aspeedtech.com \
    --to=jamin_lin@aspeedtech.com \
    --cc=clg@kaod.org \
    --cc=junjie.cao@intel.com \
    --cc=junjie.cao@linux.dev \
    --cc=kane_chen@aspeedtech.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=troy_lee@aspeedtech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox