qemu-arm.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	Igor Mammedov <imammedo@redhat.com>,
	Ani Sinha <anisinha@redhat.com>,
	Shannon Zhao <shannon.zhaosl@gmail.com>,
	qemu-arm@nongnu.org
Subject: [PULL 26/75] arm/virt: Wire up a GED error device for ACPI / GHES
Date: Sun, 5 Oct 2025 15:16:59 -0400	[thread overview]
Message-ID: <d352e33e1f92e60e12a00be1ea80f47b4e024c88.1759691708.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1759691708.git.mst@redhat.com>

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Adds support to ARM virtualization to allow handling
generic error ACPI Event via GED & error source device.

It is aligned with Linux Kernel patch:
https://lore.kernel.org/lkml/1272350481-27951-8-git-send-email-ying.huang@intel.com/

Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <3237a76b1469d669436399495825348bf34122cd.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/arm/virt.h    |  1 +
 hw/arm/virt-acpi-build.c |  1 +
 hw/arm/virt.c            | 12 +++++++++++-
 3 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index ea2cff05b0..e14ea0f9d4 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -174,6 +174,7 @@ struct VirtMachineState {
     DeviceState *gic;
     DeviceState *acpi_dev;
     Notifier powerdown_notifier;
+    Notifier generic_error_notifier;
     PCIBus *bus;
     char *oem_id;
     char *oem_table_id;
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index ff3b7a794b..2b63008df0 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -1066,6 +1066,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     }
 
     acpi_dsdt_add_power_button(scope);
+    aml_append(scope, aml_error_device());
 #ifdef CONFIG_TPM
     acpi_dsdt_add_tpm(scope, vms);
 #endif
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 02209fadcf..6960f6113f 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -693,7 +693,7 @@ static inline DeviceState *create_acpi_ged(VirtMachineState *vms)
     MachineState *ms = MACHINE(vms);
     SysBusDevice *sbdev;
     int irq = vms->irqmap[VIRT_ACPI_GED];
-    uint32_t event = ACPI_GED_PWR_DOWN_EVT;
+    uint32_t event = ACPI_GED_PWR_DOWN_EVT | ACPI_GED_ERROR_EVT;
     bool acpi_pcihp;
 
     if (ms->ram_slots) {
@@ -1050,6 +1050,13 @@ static void virt_powerdown_req(Notifier *n, void *opaque)
     }
 }
 
+static void virt_generic_error_req(Notifier *n, void *opaque)
+{
+    VirtMachineState *s = container_of(n, VirtMachineState, generic_error_notifier);
+
+    acpi_send_event(s->acpi_dev, ACPI_GENERIC_ERROR);
+}
+
 static void create_gpio_keys(char *fdt, DeviceState *pl061_dev,
                              uint32_t phandle)
 {
@@ -2500,6 +2507,9 @@ static void machvirt_init(MachineState *machine)
 
     if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) {
         vms->acpi_dev = create_acpi_ged(vms);
+        vms->generic_error_notifier.notify = virt_generic_error_req;
+        notifier_list_add(&acpi_generic_error_notifiers,
+                          &vms->generic_error_notifier);
     } else {
         create_gpio_devices(vms, VIRT_GPIO, sysmem);
     }
-- 
MST



  parent reply	other threads:[~2025-10-05 19:21 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1759691708.git.mst@redhat.com>
2025-10-05 19:16 ` [PULL 15/75] Revert "hw/acpi/ghes: Make ghes_record_cper_errors() static" Michael S. Tsirkin
2025-10-05 19:16 ` [PULL 16/75] acpi/ghes: Cleanup the code which gets ghes ged state Michael S. Tsirkin
2025-10-05 19:16 ` [PULL 17/75] acpi/ghes: prepare to change the way HEST offsets are calculated Michael S. Tsirkin
2025-10-05 19:16 ` [PULL 18/75] acpi/ghes: add a firmware file with HEST address Michael S. Tsirkin
2025-10-05 19:16 ` [PULL 19/75] acpi/ghes: Use HEST table offsets when preparing GHES records Michael S. Tsirkin
2025-10-05 19:16 ` [PULL 20/75] acpi/ghes: don't hard-code the number of sources for HEST table Michael S. Tsirkin
2025-10-05 19:16 ` [PULL 21/75] acpi/ghes: add a notifier to notify when error data is ready Michael S. Tsirkin
2025-10-05 19:16 ` [PULL 23/75] acpi/generic_event_device: add logic to detect if HEST addr is available Michael S. Tsirkin
2025-10-05 19:16 ` Michael S. Tsirkin [this message]
2025-10-05 19:17 ` [PULL 27/75] qapi/acpi-hest: add an interface to do generic CPER error injection Michael S. Tsirkin
2025-10-05 19:17 ` [PULL 30/75] docs: hest: add new "etc/acpi_table_hest_addr" and update workflow Michael S. Tsirkin
2025-10-05 19:17 ` [PULL 36/75] smbios: cap DIMM size to 2Tb as workaround for broken Windows Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d352e33e1f92e60e12a00be1ea80f47b4e024c88.1759691708.git.mst@redhat.com \
    --to=mst@redhat.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=anisinha@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=mchehab+huawei@kernel.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=shannon.zhaosl@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).