RE: [Qemu-devel] RE: qemu/slirp bootp.c bootp.h ip_icmp.h libslirp.h...

["Andreas Bollhalder" <bolle@geodb.org>]

Hello

This did it and I have it up and working. Thank a lot!!

Andreas

> -----Original Message-----
> From: qemu-devel-bounces+bolle=geodb.org@nongnu.org 
> [mailto:qemu-devel-bounces+bolle=geodb.org@nongnu.org] On 
> Behalf Of Ronald
> Sent: Monday, June 06, 2005 3:02 AM
> To: qemu-devel@nongnu.org
> Subject: [Qemu-devel] RE: qemu/slirp bootp.c bootp.h 
> ip_icmp.h libslirp.h...
> 
> 
> *This message was transferred with a trial version of 
> CommuniGate(tm) Pro*
> Le Sun, 05 Jun 2005 20:00:12 +0200, Andreas Bollhalder a écrit :
> 
> > Hello
> > 
> > On my WinXP host, I get a compile error in "udp.c" with the 
> current QEMU
> > version from the CVS. I use MinGW and MSYS (1.0.10). I was 
> able to compile
> > all versions of QEMU before.
> > 
> > Maybe, I'm too early and miss some updates which are on the way...
> 
> s_addr is already in use in winsock2.h
> 
> 8< --
> 
> struct in_addr {
>         union {
>                 struct { u_char s_b1,s_b2,s_b3,s_b4; } S_un_b;
>                 struct { u_short s_w1,s_w2; } S_un_w;
>                 u_long S_addr;
>         } S_un;
> #define s_addr  S_un.S_addr
> #define s_host  S_un.S_un_b.s_b2
> #define s_net   S_un.S_un_b.s_b1
> #define s_imp   S_un.S_un_w.s_w2
> #define s_impno S_un.S_un_b.s_b4
> #define s_lh    S_un.S_un_b.s_b3
> };
> 
> 8< --
> 
> 
> I can built if I change the name.
> 
> --- slirp/udp.c	2005-06-06 02:57:59.398260235 +0200
> +++ slirp/udp.c.try	2005-06-06 02:57:45.200935620 +0200
> @@ -425,7 +425,7 @@
>  	uint32_t	d_addr;			// destination address
>  	uint16_t	s_family;		// source family
>  	uint16_t	s_port;			// source port
> -	uint32_t	s_addr;			// source address
> +	uint32_t	so_addr;			// 
> source address
>  	uint32_t	seqn;			// sequence number
>  	uint16_t	message;		// message
>  	uint16_t	data_type;		// data type
> @@ -617,7 +617,7 @@
>  				return;
>  			cu_head = mtod(m, struct cu_header *);
>  			cu_head->s_port = addr.sin_port;
> -			cu_head->s_addr = our_addr.s_addr;
> +			cu_head->so_addr = our_addr.s_addr;
>  		}
>  		
>  		return;
> 
> 
> > Andreas
> > 
> > 
> > gcc -Wall -O2 -g -fno-strict-aliasing -fomit-frame-pointer -I.
> > -I/d/dev/QEMU/qemu/target-i386 -I/d/dev/QEMU/qemu -D_GNU_SOURCE
> > -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -I/d/dev/QEMU/qemu/fpu
> > -I/d/dev/QEMU/qemu/slirp -c -o slirp/udp.o 
> /d/dev/QEMU/qemu/slirp/udp.c
> > d:/dev/QEMU/qemu/slirp/udp.c: In function `udp_emu':
> > d:/dev/QEMU/qemu/slirp/udp.c:428: warning: no semicolon at 
> end of struct
> > or union
> > d:/dev/QEMU/qemu/slirp/udp.c:428: parse error before '.' token
> > d:/dev/QEMU/qemu/slirp/udp.c:405: warning: unused variable
`addrlen'
> > d:/dev/QEMU/qemu/slirp/udp.c:429: warning: unused variable `seqn'
> > d:/dev/QEMU/qemu/slirp/udp.c:430: warning: unused variable
`message'
> > d:/dev/QEMU/qemu/slirp/udp.c:431: warning: unused variable 
> `data_type'
> > d:/dev/QEMU/qemu/slirp/udp.c:432: warning: unused variable
`pkt_len'
> > d:/dev/QEMU/qemu/slirp/udp.c: At top level:
> > d:/dev/QEMU/qemu/slirp/udp.c:433: warning: type defaults to `int'
in
> > declaration of `cu_head'
> > d:/dev/QEMU/qemu/slirp/udp.c:433: warning: data definition 
> has no type or
> > storage class
> > d:/dev/QEMU/qemu/slirp/udp.c:435: parse error before "switch"
> > d:/dev/QEMU/qemu/slirp/udp.c:618: warning: type defaults to `int'
in
> > declaration of `cu_head'
> > d:/dev/QEMU/qemu/slirp/udp.c:618: conflicting types for `cu_head'
> > d:/dev/QEMU/qemu/slirp/udp.c:433: previous declaration of
`cu_head'
> > d:/dev/QEMU/qemu/slirp/udp.c:618: `m' undeclared here (not 
> in a function)
> > d:/dev/QEMU/qemu/slirp/udp.c:618: warning: data definition 
> has no type or
> > storage class
> > d:/dev/QEMU/qemu/slirp/udp.c:619: parse error before '->' 
> token make: ***
> > [slirp/udp.o] Error 1
> > 
> 
> 
> 
> 
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/qemu-devel
>