[Qemu-devel] more OS X patch help

[Qemu-devel] more OS X patch help

[Fred Hope]

Okay, thank you Raphael for the help.  I patched the code, then ran
./configure and then make.  I could tell that make was getting further
than it had been in the past.  But eventually, it failed, giving me
seemingly hundreds of lines like this:

/var/tmp//cc5H7LwS.s:534:Expected comma after segment-name
/var/tmp//cc5H7LwS.s:534:Rest of line ignored. 1st junk character valued
32 ( ).
/var/tmp//cc5H7LwS.s:662:Expected comma after segment-name
/var/tmp//cc5H7LwS.s:662:Rest of line ignored. 1st junk character valued
32 ( ).
/var/tmp//cc5H7LwS.s:765:Expected comma after segment-name
/var/tmp//cc5H7LwS.s:765:Rest of line ignored. 1st junk character valued
32 ( ).
/var/tmp//cc5H7LwS.s:868:Expected comma after segment-name
/var/tmp//cc5H7LwS.s:868:Rest of line ignored. 1st junk character valued
32 ( ).


Then after all that, it says:

make[1]: *** [translate.o] Error 1
make: *** [all] Error 1

I did the commands exactly as you said them, for downloading from CVS 
and for patching the file.  Would man patch help me here or is there 
some problem in the code?

Thanks,
Fred Hope

[Qemu-devel] Problem compiling under mingw32

[Natalia Portillo]

When I try to compile the lastest CVS QEMU from mingw32
qemu-system-ppc-softmmu shows an error (attached below), and the
qemu-system-i386-softmmu only shows standard output (help and monitor) when
running under MSYS, under the win32 command line it shows nothing.

Any idea?

$ make
for d in i386-softmmu ppc-softmmu; do \
make -C $d all || exit 1 ; \
        done
make[1]: Entering directory `/home/Claunia/qemu/i386-softmmu'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/Claunia/qemu/i386-softmmu'
make[1]: Entering directory `/home/Claunia/qemu/ppc-softmmu'
gcc -Wall -O2 -g -fno-strict-aliasing -fomit-frame-pointer -I.
-I/home/Claunia/qemu/target-ppc -I/home/Claunia/qemu -D_GNU_SOURCE -c -o
vl.o /home/Claunia/qemu/vl.c
In file included from c:/ARCHIV~1/MingW/include/windef.h:246,
                 from c:/ARCHIV~1/MingW/include/windows.h:48,
                 from C:/Archivos de
programa/MinGW/MSYS/home/Claunia/qemu/vl.c:60:
c:/ARCHIV~1/MingW/include/winnt.h:97: parse error before numeric constant
C:/Archivos de programa/MinGW/MSYS/home/Claunia/qemu/vl.c:1205: warning:
`term_exit' defined but not used
make[1]: *** [vl.o] Error 1
make[1]: Leaving directory `/home/Claunia/qemu/ppc-softmmu'
make: *** [all] Error 1

Re: [Qemu-devel] Problem compiling under mingw32

[Filip Navara]

Natalia Portillo wrote:

>When I try to compile the lastest CVS QEMU from mingw32
>qemu-system-ppc-softmmu shows an error (attached below), and the
>qemu-system-i386-softmmu only shows standard output (help and monitor) when
>running under MSYS, under the win32 command line it shows nothing.
>
>Any idea?
>  
>
Please, please...not again. I have sent patch for this two times to the 
list, please search the archives.

Regards,
Filip

RE: [Qemu-devel] Problem compiling under mingw32

[claunia]

Patch applied, but it does not solve the no text output if no under msys.

Also I think that the patch should be commited to CVS.

Any idea?

> -----Mensaje original-----
> De: qemu-devel-bounces+iosglpgc=teleline.es@nongnu.org 
> [mailto:qemu-devel-bounces+iosglpgc=teleline.es@nongnu.org] 
> En nombre de Filip Navara
> Enviado el: sábado, 03 de julio de 2004 20:13
> Para: qemu-devel@nongnu.org
> Asunto: Re: [Qemu-devel] Problem compiling under mingw32
> 
> 
> Natalia Portillo wrote:
> 
> >When I try to compile the lastest CVS QEMU from mingw32 
> >qemu-system-ppc-softmmu shows an error (attached below), and the 
> >qemu-system-i386-softmmu only shows standard output (help 
> and monitor) 
> >when running under MSYS, under the win32 command line it 
> shows nothing.
> >
> >Any idea?
> >  
> >
> Please, please...not again. I have sent patch for this two 
> times to the list, please search the archives.
> 
> Regards,
> Filip
> 
> 
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/qemu-devel

RE: [Qemu-devel] Problem compiling under mingw32

[J. Mayer]

On Sat, 2004-07-03 at 21:40, claunia@claunia.com wrote:
> Patch applied, but it does not solve the no text output if no under msys.
> 
> Also I think that the patch should be commited to CVS.

Sure not !
It completely breaks the PPC emulation:
with this patch, there is no link register anymore, so the PPC code
can't call or return from functions anymore !

> ginal-----
> > De: qemu-devel-bounces+iosglpgc=teleline.es@nongnu.org 
> > [mailto:qemu-devel-bounces+iosglpgc=teleline.es@nongnu.org] 
> > En nombre de Filip Navara
> > Enviado el: sábado, 03 de julio de 2004 20:13
> > Para: qemu-devel@nongnu.org
> > Asunto: Re: [Qemu-devel] Problem compiling under mingw32
> > 
> > 
> > Natalia Portillo wrote:
> > 
> > >When I try to compile the lastest CVS QEMU from mingw32 
> > >qemu-system-ppc-softmmu shows an error (attached below), and the 
> > >qemu-system-i386-softmmu only shows standard output (help 
> > and monitor) 
> > >when running under MSYS, under the win32 command line it 
> > shows nothing.
> > >
> > >Any idea?
> > >
> > Please, please...not again. I have sent patch for this two 
> > times to the list, please search the archives.
> > 
> > Regards,
> > Filip

-- 
J. Mayer <l_indien@magic.fr>
Never organized

RE: [Qemu-devel] Problem compiling under mingw32

[Natalia Portillo]

#ifdef WIN32 -> Then it only breaks the PPC under Win32 (ok it is already
not working, so its not a problem until a better solution is get).

Or this, or making the configure not allowing compilation of PPC
emulation under win32 right now.

I think both of these will be better than having a compile error that
stops before compiling the utils, etc.

> -----Mensaje original-----
> De: qemu-devel-bounces+iosglpgc=teleline.es@nongnu.org 
> [mailto:qemu-devel-bounces+iosglpgc=teleline.es@nongnu.org] 
> En nombre de J. Mayer
> Enviado el: sábado, 03 de julio de 2004 20:54
> Para: qemu-devel@nongnu.org
> Asunto: RE: [Qemu-devel] Problem compiling under mingw32
> 
> On Sat, 2004-07-03 at 21:40, claunia@claunia.com wrote:
> > Patch applied, but it does not solve the no text output if 
> no under msys.
> > 
> > Also I think that the patch should be commited to CVS.
> 
> Sure not !
> It completely breaks the PPC emulation:
> with this patch, there is no link register anymore, so the 
> PPC code can't call or return from functions anymore !
> 
> > ginal-----
> > > De: qemu-devel-bounces+iosglpgc=teleline.es@nongnu.org
> > > [mailto:qemu-devel-bounces+iosglpgc=teleline.es@nongnu.org]
> > > En nombre de Filip Navara
> > > Enviado el: sábado, 03 de julio de 2004 20:13
> > > Para: qemu-devel@nongnu.org
> > > Asunto: Re: [Qemu-devel] Problem compiling under mingw32
> > > 
> > > 
> > > Natalia Portillo wrote:
> > > 
> > > >When I try to compile the lastest CVS QEMU from mingw32 
> > > >qemu-system-ppc-softmmu shows an error (attached below), and the 
> > > >qemu-system-i386-softmmu only shows standard output (help
> > > and monitor)
> > > >when running under MSYS, under the win32 command line it
> > > shows nothing.
> > > >
> > > >Any idea?
> > > >
> > > Please, please...not again. I have sent patch for this 
> two times to 
> > > the list, please search the archives.
> > > 
> > > Regards,
> > > Filip
> 
> --
> J. Mayer <l_indien@magic.fr>
> Never organized
> 
> 
> 
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/qemu-devel

Re: [Qemu-devel] more OS X patch help

[Jeff Cooper]

[-- Attachment #1: Type: text/plain, Size: 1438 bytes --]

Fred try running configure like this:

./configure --target-list=i386-softmmu

On Jul 3, 2004, at 11:34 AM, Fred Hope wrote:

> Okay, thank you Raphael for the help.  I patched the code, then ran
> ./configure and then make.  I could tell that make was getting further
> than it had been in the past.  But eventually, it failed, giving me
> seemingly hundreds of lines like this:
>
> /var/tmp//cc5H7LwS.s:534:Expected comma after segment-name
> /var/tmp//cc5H7LwS.s:534:Rest of line ignored. 1st junk character 
> valued
> 32 ( ).
> /var/tmp//cc5H7LwS.s:662:Expected comma after segment-name
> /var/tmp//cc5H7LwS.s:662:Rest of line ignored. 1st junk character 
> valued
> 32 ( ).
> /var/tmp//cc5H7LwS.s:765:Expected comma after segment-name
> /var/tmp//cc5H7LwS.s:765:Rest of line ignored. 1st junk character 
> valued
> 32 ( ).
> /var/tmp//cc5H7LwS.s:868:Expected comma after segment-name
> /var/tmp//cc5H7LwS.s:868:Rest of line ignored. 1st junk character 
> valued
> 32 ( ).
>
>
> Then after all that, it says:
>
> make[1]: *** [translate.o] Error 1
> make: *** [all] Error 1
>
> I did the commands exactly as you said them, for downloading from CVS
> and for patching the file.  Would man patch help me here or is there
> some problem in the code?
>
> Thanks,
> Fred Hope
>
>
>
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/qemu-devel
>

[-- Attachment #2: Type: text/enriched, Size: 1489 bytes --]

Fred try running configure like this:


<fontfamily><param>Courier</param><x-tad-bigger>./configure
--target-list=i386-softmmu

</x-tad-bigger></fontfamily>

On Jul 3, 2004, at 11:34 AM, Fred Hope wrote:


<excerpt>Okay, thank you Raphael for the help.  I patched the code,
then ran

./configure and then make.  I could tell that make was getting further

than it had been in the past.  But eventually, it failed, giving me

seemingly hundreds of lines like this:


/var/tmp//cc5H7LwS.s:534:Expected comma after segment-name

/var/tmp//cc5H7LwS.s:534:Rest of line ignored. 1st junk character
valued

32 ( ).

/var/tmp//cc5H7LwS.s:662:Expected comma after segment-name

/var/tmp//cc5H7LwS.s:662:Rest of line ignored. 1st junk character
valued

32 ( ).

/var/tmp//cc5H7LwS.s:765:Expected comma after segment-name

/var/tmp//cc5H7LwS.s:765:Rest of line ignored. 1st junk character
valued

32 ( ).

/var/tmp//cc5H7LwS.s:868:Expected comma after segment-name

/var/tmp//cc5H7LwS.s:868:Rest of line ignored. 1st junk character
valued

32 ( ).



Then after all that, it says:


make[1]: *** [translate.o] Error 1

make: *** [all] Error 1


I did the commands exactly as you said them, for downloading from CVS 

and for patching the file.  Would man patch help me here or is there 

some problem in the code?


Thanks,

Fred Hope




_______________________________________________

Qemu-devel mailing list

Qemu-devel@nongnu.org

http://lists.nongnu.org/mailman/listinfo/qemu-devel


</excerpt>

Re: [Qemu-devel] Problem compiling under mingw32

[kazu]

Hi, Filip.

I added your patch on my site on June 29th. Thank you.

http://www.h7.dion.ne.jp/~qemu-win/

Hi, Natalia. I collected patches for mingw and provide exectables. Please
see my site.

Regards,
kazu

Sunday, July 04, 2004 4:12 AM Filip Navara wrote:
>
> Natalia Portillo wrote:
>
> >When I try to compile the lastest CVS QEMU from mingw32
> >qemu-system-ppc-softmmu shows an error (attached below), and the
> >qemu-system-i386-softmmu only shows standard output (help and monitor)
when
> >running under MSYS, under the win32 command line it shows nothing.
> >
> >Any idea?
> >
> >
> Please, please...not again. I have sent patch for this two times to the
> list, please search the archives.
>
> Regards,
> Filip
>