qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: Eric Blake <eblake@redhat.com>, qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com, famz@redhat.com,
	jsnow@redhat.com, Ronnie Sahlberg <ronniesahlberg@gmail.com>,
	Peter Lieven <pl@kamp.de>, Max Reitz <mreitz@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v4 07/20] iscsi: Switch to .bdrv_co_block_status()
Date: Wed, 18 Oct 2017 11:20:49 +0200	[thread overview]
Message-ID: <025af9d1-0d06-ddad-2b40-056ce4e1af15@redhat.com> (raw)
In-Reply-To: <20171012185916.22776-8-eblake@redhat.com>

On 12/10/2017 20:59, Eric Blake wrote:
> We are gradually moving away from sector-based interfaces, towards
> byte-based.  Update the iscsi driver accordingly.  In this case,
> it is handy to teach iscsi_co_block_status() to handle a NULL map
> and file parameter, even though the block layer passes non-NULL
> values, because we also call the function directly.  For now, there
> are no optimizations done based on the want_zero flag.
> 
> Signed-off-by: Eric Blake <eblake@redhat.com>
> 
> ---
> v4: rebase to interface tweaks
> v3: no change
> v2: rebase to mapping parameter
> ---
>  block/iscsi.c | 64 +++++++++++++++++++++++++++++------------------------------
>  1 file changed, 32 insertions(+), 32 deletions(-)
> 
> diff --git a/block/iscsi.c b/block/iscsi.c
> index 4896d50d6e..cb30e9652c 100644
> --- a/block/iscsi.c
> +++ b/block/iscsi.c
> @@ -647,28 +647,31 @@ out_unlock:
> 
> 
> 
> -static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
> -                                                  int64_t sector_num,
> -                                                  int nb_sectors, int *pnum,
> -                                                  BlockDriverState **file)
> +static int coroutine_fn iscsi_co_block_status(BlockDriverState *bs,
> +                                              bool want_zero, int64_t offset,
> +                                              int64_t bytes, int64_t *pnum,
> +                                              int64_t *map,
> +                                              BlockDriverState **file)
>  {
>      IscsiLun *iscsilun = bs->opaque;
>      struct scsi_get_lba_status *lbas = NULL;
>      struct scsi_lba_status_descriptor *lbasd = NULL;
>      struct IscsiTask iTask;
> -    int64_t ret;
> +    int ret;
> 
>      iscsi_co_init_iscsitask(iscsilun, &iTask);
> 
> -    if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
> +    if (!is_byte_request_lun_aligned(offset, bytes, iscsilun)) {
>          ret = -EINVAL;
>          goto out;
>      }
> 
>      /* default to all sectors allocated */
> -    ret = BDRV_BLOCK_DATA;
> -    ret |= (sector_num << BDRV_SECTOR_BITS) | BDRV_BLOCK_OFFSET_VALID;
> -    *pnum = nb_sectors;
> +    ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
> +    if (map) {
> +        *map = offset;
> +    }
> +    *pnum = bytes;
> 
>      /* LUN does not support logical block provisioning */
>      if (!iscsilun->lbpme) {
> @@ -678,7 +681,7 @@ static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
>      qemu_mutex_lock(&iscsilun->mutex);
>  retry:
>      if (iscsi_get_lba_status_task(iscsilun->iscsi, iscsilun->lun,
> -                                  sector_qemu2lun(sector_num, iscsilun),
> +                                  offset / iscsilun->block_size,
>                                    8 + 16, iscsi_co_generic_cb,
>                                    &iTask) == NULL) {
>          ret = -ENOMEM;
> @@ -717,12 +720,12 @@ retry:
> 
>      lbasd = &lbas->descriptors[0];
> 
> -    if (sector_qemu2lun(sector_num, iscsilun) != lbasd->lba) {
> +    if (offset / iscsilun->block_size != lbasd->lba) {
>          ret = -EIO;
>          goto out_unlock;
>      }
> 
> -    *pnum = sector_lun2qemu(lbasd->num_blocks, iscsilun);
> +    *pnum = lbasd->num_blocks * iscsilun->block_size;
> 
>      if (lbasd->provisioning == SCSI_PROVISIONING_TYPE_DEALLOCATED ||
>          lbasd->provisioning == SCSI_PROVISIONING_TYPE_ANCHORED) {
> @@ -733,15 +736,13 @@ retry:
>      }
> 
>      if (ret & BDRV_BLOCK_ZERO) {
> -        iscsi_allocmap_set_unallocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
> -                                       *pnum * BDRV_SECTOR_SIZE);
> +        iscsi_allocmap_set_unallocated(iscsilun, offset, *pnum);
>      } else {
> -        iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
> -                                     *pnum * BDRV_SECTOR_SIZE);
> +        iscsi_allocmap_set_allocated(iscsilun, offset, *pnum);
>      }
> 
> -    if (*pnum > nb_sectors) {
> -        *pnum = nb_sectors;
> +    if (*pnum > bytes) {
> +        *pnum = bytes;
>      }
>  out_unlock:
>      qemu_mutex_unlock(&iscsilun->mutex);
> @@ -749,7 +750,7 @@ out:
>      if (iTask.task != NULL) {
>          scsi_free_scsi_task(iTask.task);
>      }
> -    if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID) {
> +    if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID && file) {
>          *file = bs;
>      }
>      return ret;
> @@ -788,25 +789,24 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
>                                   nb_sectors * BDRV_SECTOR_SIZE) &&
>          !iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
>                                       nb_sectors * BDRV_SECTOR_SIZE)) {
> -        int pnum;
> -        BlockDriverState *file;
> +        int64_t pnum;
>          /* check the block status from the beginning of the cluster
>           * containing the start sector */
> -        int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
> -        int head;
> -        int64_t ret;
> +        int64_t head;
> +        int ret;
> 
> -        assert(cluster_sectors);
> -        head = sector_num % cluster_sectors;
> -        ret = iscsi_co_get_block_status(bs, sector_num - head,
> -                                        BDRV_REQUEST_MAX_SECTORS, &pnum,
> -                                        &file);
> +        assert(iscsilun->cluster_size);
> +        head = (sector_num * BDRV_SECTOR_SIZE) % iscsilun->cluster_size;
> +        ret = iscsi_co_block_status(bs, false,
> +                                    sector_num * BDRV_SECTOR_SIZE - head,
> +                                    BDRV_REQUEST_MAX_BYTES, &pnum, NULL, NULL);
>          if (ret < 0) {
>              return ret;
>          }
>          /* if the whole request falls into an unallocated area we can avoid
>           * reading and directly return zeroes instead */
> -        if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
> +        if (ret & BDRV_BLOCK_ZERO &&
> +            pnum >= nb_sectors * BDRV_SECTOR_SIZE + head) {
>              qemu_iovec_memset(iov, 0, 0x00, iov->size);
>              return 0;
>          }
> @@ -2192,7 +2192,7 @@ static BlockDriver bdrv_iscsi = {
>      .bdrv_truncate   = iscsi_truncate,
>      .bdrv_refresh_limits = iscsi_refresh_limits,
> 
> -    .bdrv_co_get_block_status = iscsi_co_get_block_status,
> +    .bdrv_co_block_status  = iscsi_co_block_status,
>      .bdrv_co_pdiscard      = iscsi_co_pdiscard,
>      .bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
>      .bdrv_co_readv         = iscsi_co_readv,
> @@ -2227,7 +2227,7 @@ static BlockDriver bdrv_iser = {
>      .bdrv_truncate   = iscsi_truncate,
>      .bdrv_refresh_limits = iscsi_refresh_limits,
> 
> -    .bdrv_co_get_block_status = iscsi_co_get_block_status,
> +    .bdrv_co_block_status  = iscsi_co_block_status,
>      .bdrv_co_pdiscard      = iscsi_co_pdiscard,
>      .bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
>      .bdrv_co_readv         = iscsi_co_readv,
> 

Acked-by: Paolo Bonzini <pbonzini@redhat.com>

  reply	other threads:[~2017-10-18  9:21 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-12 18:58 [Qemu-devel] [PATCH v4 00/20] add byte-based block_status driver callbacks Eric Blake
2017-10-12 18:58 ` [Qemu-devel] [PATCH v4 01/20] block: Add .bdrv_co_block_status() callback Eric Blake
2017-11-28  8:02   ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:58 ` [Qemu-devel] [PATCH v4 02/20] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
2017-11-28  8:19   ` Vladimir Sementsov-Ogievskiy
2017-11-28 16:05     ` Eric Blake
2017-10-12 18:58 ` [Qemu-devel] [PATCH v4 03/20] file-posix: Switch " Eric Blake
2017-11-30  8:06   ` Vladimir Sementsov-Ogievskiy
2017-11-30 20:40   ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 04/20] gluster: " Eric Blake
2017-11-30  8:44   ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 05/20] iscsi: Switch cluster_sectors to byte-based Eric Blake
2017-10-18  9:20   ` Paolo Bonzini
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 06/20] iscsi: Switch iscsi_allocmap_update() " Eric Blake
2017-10-18  9:20   ` Paolo Bonzini
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 07/20] iscsi: Switch to .bdrv_co_block_status() Eric Blake
2017-10-18  9:20   ` Paolo Bonzini [this message]
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 08/20] null: " Eric Blake
2017-11-30  8:47   ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 09/20] parallels: " Eric Blake
2017-11-30  9:03   ` Vladimir Sementsov-Ogievskiy
2017-11-30 22:12     ` Eric Blake
2017-11-30 22:18       ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 10/20] qcow: " Eric Blake
2017-11-30  9:26   ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 11/20] qcow2: " Eric Blake
2017-11-30  9:51   ` Vladimir Sementsov-Ogievskiy
2017-11-30 22:38     ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 12/20] qed: " Eric Blake
2017-11-30 10:27   ` Vladimir Sementsov-Ogievskiy
2017-11-30 23:17     ` Eric Blake
2017-12-04  8:59       ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 13/20] raw: " Eric Blake
2017-11-30 11:10   ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 14/20] sheepdog: " Eric Blake
2017-11-30 11:13   ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 15/20] vdi: Avoid bitrot of debugging code Eric Blake
2017-11-30 11:17   ` Vladimir Sementsov-Ogievskiy
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 16/20] vdi: Switch to .bdrv_co_block_status() Eric Blake
2017-11-30 11:26   ` Vladimir Sementsov-Ogievskiy
2017-11-30 23:11     ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 17/20] vmdk: " Eric Blake
2017-11-30 11:39   ` Vladimir Sementsov-Ogievskiy
2017-11-30 23:18     ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 18/20] vpc: " Eric Blake
2017-11-30 12:22   ` Vladimir Sementsov-Ogievskiy
2017-11-30 23:28     ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 19/20] vvfat: " Eric Blake
2017-11-30 12:25   ` Vladimir Sementsov-Ogievskiy
2017-11-30 23:31     ` Eric Blake
2017-10-12 18:59 ` [Qemu-devel] [PATCH v4 20/20] block: Drop unused .bdrv_co_get_block_status() Eric Blake
2017-11-30 12:29   ` Vladimir Sementsov-Ogievskiy
2017-11-21 11:27 ` [Qemu-devel] [PATCH v4 00/20] add byte-based block_status driver callbacks Vladimir Sementsov-Ogievskiy
2017-11-21 12:28   ` Eric Blake
2017-11-30 13:04 ` Vladimir Sementsov-Ogievskiy
2017-11-30 15:36   ` Eric Blake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=025af9d1-0d06-ddad-2b40-056ce4e1af15@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=eblake@redhat.com \
    --cc=famz@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=pl@kamp.de \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=ronniesahlberg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).