From: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
To: Yuval Shaia <yuval.shaia@oracle.com>,
dmitry.fleytman@gmail.com, jasowang@redhat.com,
eblake@redhat.com, armbru@redhat.com, pbonzini@redhat.com,
qemu-devel@nongnu.org, shamir.rabinovitch@oracle.com,
cohuck@redhat.com
Subject: Re: [Qemu-devel] [PATCH v3 17/23] hw/pvrdma: Fill error code in command's response
Date: Sat, 17 Nov 2018 14:22:31 +0200 [thread overview]
Message-ID: <0770c06d-b482-c0bf-0d6a-efe31984b31e@gmail.com> (raw)
In-Reply-To: <20181113071336.6242-18-yuval.shaia@oracle.com>
On 11/13/18 9:13 AM, Yuval Shaia wrote:
> Driver checks error code let's set it.
>
> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
> ---
> hw/rdma/vmw/pvrdma_cmd.c | 67 ++++++++++++++++++++++++++++------------
> 1 file changed, 48 insertions(+), 19 deletions(-)
>
> diff --git a/hw/rdma/vmw/pvrdma_cmd.c b/hw/rdma/vmw/pvrdma_cmd.c
> index 0d3c818c20..a326c5d470 100644
> --- a/hw/rdma/vmw/pvrdma_cmd.c
> +++ b/hw/rdma/vmw/pvrdma_cmd.c
> @@ -131,7 +131,8 @@ static int query_port(PVRDMADev *dev, union pvrdma_cmd_req *req,
>
> if (rdma_backend_query_port(&dev->backend_dev,
> (struct ibv_port_attr *)&attrs)) {
> - return -ENOMEM;
> + resp->hdr.err = -ENOMEM;
> + goto out;
> }
>
> memset(resp, 0, sizeof(*resp));
> @@ -150,7 +151,9 @@ static int query_port(PVRDMADev *dev, union pvrdma_cmd_req *req,
> resp->attrs.active_width = 1;
> resp->attrs.active_speed = 1;
>
> - return 0;
> +out:
> + pr_dbg("ret=%d\n", resp->hdr.err);
> + return resp->hdr.err;
> }
>
> static int query_pkey(PVRDMADev *dev, union pvrdma_cmd_req *req,
> @@ -170,7 +173,7 @@ static int query_pkey(PVRDMADev *dev, union pvrdma_cmd_req *req,
> resp->pkey = PVRDMA_PKEY;
> pr_dbg("pkey=0x%x\n", resp->pkey);
>
> - return 0;
> + return resp->hdr.err;
> }
>
> static int create_pd(PVRDMADev *dev, union pvrdma_cmd_req *req,
> @@ -200,7 +203,9 @@ static int destroy_pd(PVRDMADev *dev, union pvrdma_cmd_req *req,
>
> rdma_rm_dealloc_pd(&dev->rdma_dev_res, cmd->pd_handle);
>
> - return 0;
> + rsp->hdr.err = 0;
Is it possible to ensure err is 0 by default during hdr creation
instead of manually setting it every time?
Thanks,
Marcel
> +
> + return rsp->hdr.err;
> }
>
> static int create_mr(PVRDMADev *dev, union pvrdma_cmd_req *req,
> @@ -251,7 +256,9 @@ static int destroy_mr(PVRDMADev *dev, union pvrdma_cmd_req *req,
>
> rdma_rm_dealloc_mr(&dev->rdma_dev_res, cmd->mr_handle);
>
> - return 0;
> + rsp->hdr.err = 0;
> +
> + return rsp->hdr.err;
> }
>
> static int create_cq_ring(PCIDevice *pci_dev , PvrdmaRing **ring,
> @@ -353,7 +360,8 @@ static int destroy_cq(PVRDMADev *dev, union pvrdma_cmd_req *req,
> cq = rdma_rm_get_cq(&dev->rdma_dev_res, cmd->cq_handle);
> if (!cq) {
> pr_dbg("Invalid CQ handle\n");
> - return -EINVAL;
> + rsp->hdr.err = -EINVAL;
> + goto out;
> }
>
> ring = (PvrdmaRing *)cq->opaque;
> @@ -364,7 +372,11 @@ static int destroy_cq(PVRDMADev *dev, union pvrdma_cmd_req *req,
>
> rdma_rm_dealloc_cq(&dev->rdma_dev_res, cmd->cq_handle);
>
> - return 0;
> + rsp->hdr.err = 0;
> +
> +out:
> + pr_dbg("ret=%d\n", rsp->hdr.err);
> + return rsp->hdr.err;
> }
>
> static int create_qp_rings(PCIDevice *pci_dev, uint64_t pdir_dma,
> @@ -553,7 +565,8 @@ static int destroy_qp(PVRDMADev *dev, union pvrdma_cmd_req *req,
> qp = rdma_rm_get_qp(&dev->rdma_dev_res, cmd->qp_handle);
> if (!qp) {
> pr_dbg("Invalid QP handle\n");
> - return -EINVAL;
> + rsp->hdr.err = -EINVAL;
> + goto out;
> }
>
> rdma_rm_dealloc_qp(&dev->rdma_dev_res, cmd->qp_handle);
> @@ -567,7 +580,11 @@ static int destroy_qp(PVRDMADev *dev, union pvrdma_cmd_req *req,
> rdma_pci_dma_unmap(PCI_DEVICE(dev), ring->ring_state, TARGET_PAGE_SIZE);
> g_free(ring);
>
> - return 0;
> + rsp->hdr.err = 0;
> +
> +out:
> + pr_dbg("ret=%d\n", rsp->hdr.err);
> + return rsp->hdr.err;
> }
>
> static int create_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> @@ -580,7 +597,8 @@ static int create_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> pr_dbg("index=%d\n", cmd->index);
>
> if (cmd->index >= MAX_PORT_GIDS) {
> - return -EINVAL;
> + rsp->hdr.err = -EINVAL;
> + goto out;
> }
>
> pr_dbg("gid[%d]=0x%llx,0x%llx\n", cmd->index,
> @@ -590,10 +608,15 @@ static int create_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> rc = rdma_rm_add_gid(&dev->rdma_dev_res, &dev->backend_dev,
> dev->backend_eth_device_name, gid, cmd->index);
> if (rc < 0) {
> - return -EINVAL;
> + rsp->hdr.err = rc;
> + goto out;
> }
>
> - return 0;
> + rsp->hdr.err = 0;
> +
> +out:
> + pr_dbg("ret=%d\n", rsp->hdr.err);
> + return rsp->hdr.err;
> }
>
> static int destroy_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> @@ -606,7 +629,8 @@ static int destroy_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> pr_dbg("index=%d\n", cmd->index);
>
> if (cmd->index >= MAX_PORT_GIDS) {
> - return -EINVAL;
> + rsp->hdr.err = -EINVAL;
> + goto out;
> }
>
> rc = rdma_rm_del_gid(&dev->rdma_dev_res, &dev->backend_dev,
> @@ -617,7 +641,11 @@ static int destroy_bind(PVRDMADev *dev, union pvrdma_cmd_req *req,
> goto out;
> }
>
> - return 0;
> + rsp->hdr.err = 0;
> +
> +out:
> + pr_dbg("ret=%d\n", rsp->hdr.err);
> + return rsp->hdr.err;
> }
>
> static int create_uc(PVRDMADev *dev, union pvrdma_cmd_req *req,
> @@ -634,9 +662,8 @@ static int create_uc(PVRDMADev *dev, union pvrdma_cmd_req *req,
> resp->hdr.err = rdma_rm_alloc_uc(&dev->rdma_dev_res, cmd->pfn,
> &resp->ctx_handle);
>
> - pr_dbg("ret=%d\n", resp->hdr.err);
> -
> - return 0;
> + pr_dbg("ret=%d\n", rsp->hdr.err);
> + return rsp->hdr.err;
> }
>
> static int destroy_uc(PVRDMADev *dev, union pvrdma_cmd_req *req,
> @@ -648,7 +675,9 @@ static int destroy_uc(PVRDMADev *dev, union pvrdma_cmd_req *req,
>
> rdma_rm_dealloc_uc(&dev->rdma_dev_res, cmd->ctx_handle);
>
> - return 0;
> + rsp->hdr.err = 0;
> +
> + return rsp->hdr.err;
> }
> struct cmd_handler {
> uint32_t cmd;
> @@ -696,7 +725,7 @@ int execute_command(PVRDMADev *dev)
> }
>
> err = cmd_handlers[dsr_info->req->hdr.cmd].exec(dev, dsr_info->req,
> - dsr_info->rsp);
> + dsr_info->rsp);
> out:
> set_reg_val(dev, PVRDMA_REG_ERR, err);
> post_interrupt(dev, INTR_VEC_CMD_RING);
next prev parent reply other threads:[~2018-11-17 12:22 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-13 7:12 [Qemu-devel] [PATCH v3 00/23] Add support for RDMA MAD Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 01/23] contrib/rdmacm-mux: Add implementation of RDMA User MAD multiplexer Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 02/23] hw/rdma: Add ability to force notification without re-arm Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 03/23] hw/rdma: Return qpn 1 if ibqp is NULL Yuval Shaia
2018-11-17 11:42 ` Marcel Apfelbaum
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 04/23] hw/rdma: Abort send-op if fail to create addr handler Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 05/23] hw/rdma: Add support for MAD packets Yuval Shaia
2018-11-17 12:06 ` Marcel Apfelbaum
2018-11-18 9:33 ` Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 06/23] hw/pvrdma: Make function reset_device return void Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 07/23] hw/pvrdma: Make default pkey 0xFFFF Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 08/23] hw/pvrdma: Set the correct opcode for recv completion Yuval Shaia
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 09/23] hw/pvrdma: Set the correct opcode for send completion Yuval Shaia
2018-11-17 12:07 ` Marcel Apfelbaum
2018-11-13 7:12 ` [Qemu-devel] [PATCH v3 10/23] json: Define new QMP message for pvrdma Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 11/23] hw/pvrdma: Add support to allow guest to configure GID table Yuval Shaia
2018-11-17 12:48 ` Marcel Apfelbaum
2018-11-18 8:13 ` Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 12/23] vmxnet3: Move some definitions to header file Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 13/23] hw/pvrdma: Make sure PCI function 0 is vmxnet3 Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 14/23] hw/rdma: Initialize node_guid from vmxnet3 mac address Yuval Shaia
2018-11-17 12:10 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 15/23] hw/pvrdma: Make device state depend on Ethernet function state Yuval Shaia
2018-11-17 12:11 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 16/23] hw/pvrdma: Fill all CQE fields Yuval Shaia
2018-11-17 12:19 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 17/23] hw/pvrdma: Fill error code in command's response Yuval Shaia
2018-11-17 12:22 ` Marcel Apfelbaum [this message]
2018-11-18 8:24 ` Yuval Shaia
2018-11-25 7:35 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 18/23] hw/rdma: Remove unneeded code that handles more that one port Yuval Shaia
2018-11-17 12:23 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 19/23] vl: Introduce shutdown_notifiers Yuval Shaia
2018-11-13 9:34 ` Cornelia Huck
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 20/23] hw/pvrdma: Clean device's resource when system is shutdown Yuval Shaia
2018-11-17 12:24 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 21/23] hw/rdma: Do not use bitmap_zero_extend to free bitmap Yuval Shaia
2018-11-17 12:25 ` Marcel Apfelbaum
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 22/23] hw/rdma: Do not call rdma_backend_del_gid on an empty gid Yuval Shaia
2018-11-17 12:25 ` Marcel Apfelbaum
2018-11-18 9:42 ` Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 23/23] docs: Update pvrdma device documentation Yuval Shaia
2018-11-17 12:34 ` Marcel Apfelbaum
2018-11-18 7:27 ` Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 00/23] Add support for RDMA MAD Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 01/23] contrib/rdmacm-mux: Add implementation of RDMA User MAD multiplexer Yuval Shaia
2018-11-17 17:27 ` Shamir Rabinovitch
2018-11-18 10:17 ` Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 02/23] hw/rdma: Add ability to force notification without re-arm Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 03/23] hw/rdma: Return qpn 1 if ibqp is NULL Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 04/23] hw/rdma: Abort send-op if fail to create addr handler Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 05/23] hw/rdma: Add support for MAD packets Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 06/23] hw/pvrdma: Make function reset_device return void Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 07/23] hw/pvrdma: Make default pkey 0xFFFF Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 08/23] hw/pvrdma: Set the correct opcode for recv completion Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 09/23] hw/pvrdma: Set the correct opcode for send completion Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 10/23] json: Define new QMP message for pvrdma Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 11/23] hw/pvrdma: Add support to allow guest to configure GID table Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 12/23] vmxnet3: Move some definitions to header file Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 13/23] hw/pvrdma: Make sure PCI function 0 is vmxnet3 Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 14/23] hw/rdma: Initialize node_guid from vmxnet3 mac address Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 15/23] hw/pvrdma: Make device state depend on Ethernet function state Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 16/23] hw/pvrdma: Fill all CQE fields Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 17/23] hw/pvrdma: Fill error code in command's response Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 18/23] hw/rdma: Remove unneeded code that handles more that one port Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 19/23] vl: Introduce shutdown_notifiers Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 20/23] hw/pvrdma: Clean device's resource when system is shutdown Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 21/23] hw/rdma: Do not use bitmap_zero_extend to free bitmap Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 22/23] hw/rdma: Do not call rdma_backend_del_gid on an empty gid Yuval Shaia
2018-11-13 7:13 ` [Qemu-devel] [PATCH v3 23/23] docs: Update pvrdma device documentation Yuval Shaia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0770c06d-b482-c0bf-0d6a-efe31984b31e@gmail.com \
--to=marcel.apfelbaum@gmail.com \
--cc=armbru@redhat.com \
--cc=cohuck@redhat.com \
--cc=dmitry.fleytman@gmail.com \
--cc=eblake@redhat.com \
--cc=jasowang@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=shamir.rabinovitch@oracle.com \
--cc=yuval.shaia@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).