Re: [QEMU PATCH v3 8/9] cxl-mailbox-utils: 0x5604 - FMAPI Initiate DC Add

[ALOK TIWARI <alok.a.tiwari@oracle.com>]

On 06-06-2025 05:12, anisa.su887@gmail.com wrote:
> From: Anisa Su <anisa.su@samsung.com>
> 
> FM DCD Management command 0x5604 implemented per CXL r3.2 Spec Section 7.6.7.6.5
> 
> Signed-off-by: Anisa Su <anisa.su@samsung.com>
> ---
>   hw/cxl/cxl-mailbox-utils.c  | 152 ++++++++++++++++++++++++++++++++++++
>   hw/mem/cxl_type3.c          |   8 +-
>   include/hw/cxl/cxl_device.h |   4 +
>   3 files changed, 160 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index 004e502b22..7ee5be00bc 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -123,6 +123,7 @@ enum {
>           #define GET_HOST_DC_REGION_CONFIG   0x1
>           #define SET_DC_REGION_CONFIG        0x2
>           #define GET_DC_REGION_EXTENT_LIST   0x3
> +        #define INITIATE_DC_ADD             0x4
>   };
>   
>   /* CCI Message Format CXL r3.1 Figure 7-19 */
> @@ -3540,6 +3541,150 @@ static CXLRetCode cmd_fm_get_dc_region_extent_list(const struct cxl_cmd *cmd,
>       return CXL_MBOX_SUCCESS;
>   }
>   
> +static void cxl_mbox_dc_add_to_pending(CXLType3Dev *ct3d,
> +                                       uint32_t ext_count,
> +                                       CXLDCExtentRaw extents[])
> +{
> +    CXLDCExtentGroup *group = NULL;
> +    int i;
> +
> +    for (i = 0; i < ext_count; i++) {
> +        group = cxl_insert_extent_to_extent_group(group,
> +                                                  extents[i].start_dpa,
> +                                                  extents[i].len,
> +                                                  extents[i].tag,
> +                                                  extents[i].shared_seq);
> +    }
> +
> +    cxl_extent_group_list_insert_tail(&ct3d->dc.extents_pending, group);
> +    ct3d->dc.total_extent_count += ext_count;
> +}
> +
> +static void cxl_mbox_create_dc_event_records_for_extents(CXLType3Dev *ct3d,
> +                                                         CXLDCEventType type,
> +                                                         CXLDCExtentRaw extents[],
> +                                                         uint32_t ext_count)
> +{
> +    CXLEventDynamicCapacity event_rec = {};
> +    int i;
> +
> +    cxl_assign_event_header(&event_rec.hdr,
> +                            &dynamic_capacity_uuid,
> +                            (1 << CXL_EVENT_TYPE_INFO),
> +                            sizeof(event_rec),
> +                            cxl_device_get_timestamp(&ct3d->cxl_dstate));
> +    event_rec.type = type;
> +    event_rec.validity_flags = 1;
> +    event_rec.host_id = 0;
> +    event_rec.updated_region_id = 0;
> +    event_rec.extents_avail = CXL_NUM_EXTENTS_SUPPORTED -
> +                              ct3d->dc.total_extent_count;
> +
> +    for (i = 0; i < ext_count; i++) {
> +        memcpy(&event_rec.dynamic_capacity_extent,
> +               &extents[i],
> +               sizeof(CXLDCExtentRaw));
> +        event_rec.flags = 0;
> +        if (i < ext_count - 1) {
> +            /* Set "More" flag */
> +            event_rec.flags |= BIT(0);
> +        }
> +
> +        if (cxl_event_insert(&ct3d->cxl_dstate,
> +                             CXL_EVENT_TYPE_DYNAMIC_CAP,
> +                             (CXLEventRecordRaw *)&event_rec)) {
> +            cxl_event_irq_assert(ct3d);
> +        }
> +    }
> +}
> +
> +/*
> + * Helper function to convert CXLDCExtentRaw to CXLUpdateDCExtentListInPl
> + * in order to reuse cxl_detect_malformed_extent_list() functin which accepts

typo functin

> + * CXLUpdateDCExtentListInPl as a parameter.
> + */
> +static void convert_raw_extents(CXLDCExtentRaw raw_extents[],
> +                                CXLUpdateDCExtentListInPl *extent_list,
> +                                int count)
> +{
> +    int i;
> +
> +    extent_list->num_entries_updated = count;
> +
> +    for (i = 0; i < count; i++) {
> +        extent_list->updated_entries[i].start_dpa = raw_extents[i].start_dpa;
> +        extent_list->updated_entries[i].len = raw_extents[i].len;
> +    }
> +}
> +
> +/* CXL r3.2 Section 7.6.7.6.5 Initiate Dynamic Capacity Add (Opcode 5604h) */
> +static CXLRetCode cmd_fm_initiate_dc_add(const struct cxl_cmd *cmd,
> +                                         uint8_t *payload_in,
> +                                         size_t len_in,
> +                                         uint8_t *payload_out,
> +                                         size_t *len_out,
> +                                         CXLCCI *cci)
> +{
> +    struct {
> +        uint16_t host_id;
> +        uint8_t selection_policy;
> +        uint8_t reg_num;
> +        uint64_t length;
> +        uint8_t tag[0x10];
> +        uint32_t ext_count;
> +        CXLDCExtentRaw extents[];
> +    } QEMU_PACKED *in = (void *)payload_in;
> +    CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> +    CXLUpdateDCExtentListInPl *list;
> +    int i, rc;
> +
> +    switch (in->selection_policy) {
> +    case CXL_EXTENT_SELECTION_POLICY_PRESCRIPTIVE:
> +        /* Adding extents exceeds device's extent tracking ability. */
> +        if (in->ext_count + ct3d->dc.total_extent_count >
> +            CXL_NUM_EXTENTS_SUPPORTED) {
> +            return CXL_MBOX_RESOURCES_EXHAUSTED;
> +        }
> +
> +        list = calloc(1, (sizeof(*list) +
> +                          in->ext_count * sizeof(*list->updated_entries)));
> +        convert_raw_extents(in->extents, list, in->ext_count);
> +        rc = cxl_detect_malformed_extent_list(ct3d, list);
> +
> +        for (i = 0; i < in->ext_count; i++) {
> +            CXLDCExtentRaw ext = in->extents[i];
> +             /* Check requested extents do not overlap with pending extents. */
> +            if (cxl_extent_groups_overlaps_dpa_range(&ct3d->dc.extents_pending,
> +                                                     ext.start_dpa, ext.len)) {
> +                return CXL_MBOX_INVALID_EXTENT_LIST;
> +            }
> +            /* Check requested extents do not overlap with existing extents. */
> +            if (cxl_extents_overlaps_dpa_range(&ct3d->dc.extents,
> +                                               ext.start_dpa, ext.len)) {
> +                return CXL_MBOX_INVALID_EXTENT_LIST;
> +            }
> +        }
> +
> +        if (rc) {
> +            return rc;

is list free not require ?

> +        }
> +
> +        cxl_mbox_dc_add_to_pending(ct3d, in->ext_count, in->extents);
> +        cxl_mbox_create_dc_event_records_for_extents(ct3d,
> +                                                     DC_EVENT_ADD_CAPACITY,
> +                                                     in->extents,
> +                                                     in->ext_count);
> +
> +        return CXL_MBOX_SUCCESS;
> +    default:
> +        qemu_log_mask(LOG_UNIMP,
> +                      "CXL extent selection policy not supported.\n");
> +        return CXL_MBOX_INVALID_INPUT;
> +    }
> +
> +    return CXL_MBOX_SUCCESS;

CXL_MBOX_SUCCESS, this is unreachable

> +}
> +
>   static const struct cxl_cmd cxl_cmd_set[256][256] = {
>       [INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
>           cmd_infostat_bg_op_abort, 0, 0 },
> @@ -3667,6 +3812,13 @@ static const struct cxl_cmd cxl_cmd_set_fm_dcd[256][256] = {
>            CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
>       [FMAPI_DCD_MGMT][GET_DC_REGION_EXTENT_LIST] = { "GET_DC_REGION_EXTENT_LIST",
>           cmd_fm_get_dc_region_extent_list, 12, 0 },
> +    [FMAPI_DCD_MGMT][INITIATE_DC_ADD] = { "INIT_DC_ADD",
> +        cmd_fm_initiate_dc_add, ~0,
> +        (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
> +        CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
> +        CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
> +        CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
> +        CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
>   };
>   


Thanks,
Alok