From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: Richard Henderson <richard.henderson@linaro.org>, qemu-devel@nongnu.org
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: Re: [PATCH 1/7] tcg/tcg-op: Document bswap16() byte pattern
Date: Tue, 22 Aug 2023 19:22:41 +0200 [thread overview]
Message-ID: <09f4ba68-e7f3-8a90-e996-e475b760c64a@linaro.org> (raw)
In-Reply-To: <c538a498-05e4-23ed-328e-7355436f6c7a@linaro.org>
On 22/8/23 17:58, Richard Henderson wrote:
> On 8/22/23 02:37, Philippe Mathieu-Daudé wrote:
>> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
>> ---
>> tcg/tcg-op.c | 48 ++++++++++++++++++++++++++++++++----------------
>> 1 file changed, 32 insertions(+), 16 deletions(-)
>>
>> diff --git a/tcg/tcg-op.c b/tcg/tcg-op.c
>> index 7aadb37756..f164ddc95e 100644
>> --- a/tcg/tcg-op.c
>> +++ b/tcg/tcg-op.c
>> @@ -1021,6 +1021,13 @@ void tcg_gen_ext16u_i32(TCGv_i32 ret, TCGv_i32
>> arg)
>> }
>> }
>> +/*
>> + * bswap16_i32: 16-bit byte swap on the low bits of a 32-bit value.
>> + *
>> + * Byte pattern: bswap16_i32(xxab) -> ..ba (TCG_BSWAP_OZ)
>> + * bswap16_i32(xxab) -> ssba (TCG_BSWAP_OS)
>> + * bswap16_i32(xxab) -> xxba
>> + */
>
> Don't forget TCG_BSWAP_IZ, which means the input is already zero-extended.
> Which makes
>
>> + /* arg = xxab */
>> + tcg_gen_shri_i32(t0, arg, 8); /* t0 = .xxa */
>
> this
>
>> if (!(flags & TCG_BSWAP_IZ)) {
>> - tcg_gen_ext8u_i32(t0, t0);
>> + tcg_gen_ext8u_i32(t0, t0); /* t0 = ...a */
>> }
>> if (flags & TCG_BSWAP_OS) {
>> - tcg_gen_shli_i32(t1, arg, 24);
>> - tcg_gen_sari_i32(t1, t1, 16);
>> + tcg_gen_shli_i32(t1, arg, 24); /* t1 = b... */
>> + tcg_gen_sari_i32(t1, t1, 16); /* t1 = ssb. */
>> } else if (flags & TCG_BSWAP_OZ) {
>> - tcg_gen_ext8u_i32(t1, arg);
>> - tcg_gen_shli_i32(t1, t1, 8);
>> + tcg_gen_ext8u_i32(t1, arg); /* t1 = ...b */
>> + tcg_gen_shli_i32(t1, t1, 8); /* t1 = ..b. */
>> } else {
>> - tcg_gen_shli_i32(t1, arg, 8);
>> + tcg_gen_shli_i32(t1, arg, 8); /* t1 = xab. */
>
> and this slightly inaccurate.
>
>> }
>> - tcg_gen_or_i32(ret, t0, t1);
>> + tcg_gen_or_i32(ret, t0, t1); /* ret = ssba */
>
> This one is just confusing, since each of the three cases above have
> different outputs.
Is that formatting OK with you?
/*
* bswap16_i32: 16-bit byte swap on the low bits of a 32-bit value.
*
* Byte pattern: bswap16_i32(..ab) -> ..ba (TCG_BSWAP_IZ)
* bswap16_i32(xxab) -> ..ba (TCG_BSWAP_OZ)
* bswap16_i32(xxab) -> ssba (TCG_BSWAP_OS)
* bswap16_i32(xxab) -> xxba
*/
void tcg_gen_bswap16_i32(TCGv_i32 ret, TCGv_i32 arg, int flags)
{
/* Only one extension flag may be present. */
tcg_debug_assert(!(flags & TCG_BSWAP_OS) || !(flags & TCG_BSWAP_OZ));
if (TCG_TARGET_HAS_bswap16_i32) {
tcg_gen_op3i_i32(INDEX_op_bswap16_i32, ret, arg, flags);
} else {
TCGv_i32 t0 = tcg_temp_ebb_new_i32();
TCGv_i32 t1 = tcg_temp_ebb_new_i32();
/* arg = xxab (IZ=0) */
/* ..ab (IZ=1) */
tcg_gen_shri_i32(t0, arg, 8); /* t0 = .xxa (IZ=0) */
/* ...a (IZ=1) */
if (!(flags & TCG_BSWAP_IZ)) {
tcg_gen_ext8u_i32(t0, t0); /* t0 = ...a */
}
if (flags & TCG_BSWAP_OS) {
tcg_gen_shli_i32(t1, arg, 24); /* t1 = b... */
tcg_gen_sari_i32(t1, t1, 16); /* t1 = ssb. */
} else if (flags & TCG_BSWAP_OZ) {
tcg_gen_ext8u_i32(t1, arg); /* t1 = ...b */
tcg_gen_shli_i32(t1, t1, 8); /* t1 = ..b. */
} else {
tcg_gen_shli_i32(t1, arg, 8); /* t1 = xab. (IZ=0) */
/* .ab. (IZ=1) */
}
tcg_gen_or_i32(ret, t0, t1); /* ret = ..ba (IZ=1 or OZ=1) */
/* = ssba (OS=1) */
/* = xxba (no flag) */
tcg_temp_free_i32(t0);
tcg_temp_free_i32(t1);
}
}
---
next prev parent reply other threads:[~2023-08-22 17:23 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-22 9:37 [PATCH 0/7] tcg: Document *swap/deposit helpers Philippe Mathieu-Daudé
2023-08-22 9:37 ` [PATCH 1/7] tcg/tcg-op: Document bswap16() byte pattern Philippe Mathieu-Daudé
2023-08-22 15:58 ` Richard Henderson
2023-08-22 17:22 ` Philippe Mathieu-Daudé [this message]
2023-08-22 17:29 ` Richard Henderson
2023-08-22 22:04 ` Philippe Mathieu-Daudé
2023-08-22 9:37 ` [PATCH 2/7] tcg/tcg-op: Document bswap32() " Philippe Mathieu-Daudé
2023-08-22 16:00 ` Richard Henderson
2023-08-23 13:14 ` Philippe Mathieu-Daudé
2023-08-23 15:54 ` Richard Henderson
2023-08-22 9:37 ` [PATCH 3/7] tcg/tcg-op: Document bswap64() " Philippe Mathieu-Daudé
2023-08-22 16:00 ` Richard Henderson
2023-08-22 9:37 ` [PATCH 4/7] tcg/tcg-op: Document hswap() " Philippe Mathieu-Daudé
2023-08-22 16:02 ` Richard Henderson
2023-08-22 16:04 ` Richard Henderson
2023-08-22 9:37 ` [PATCH 5/7] tcg/tcg-op: Document wswap() " Philippe Mathieu-Daudé
2023-08-22 16:03 ` Richard Henderson
2023-08-22 9:37 ` [PATCH 6/7] tcg/tcg-op: Document deposit_z() Philippe Mathieu-Daudé
2023-08-22 16:05 ` Richard Henderson
2023-08-22 9:37 ` [PATCH 7/7] target/cris: Fix a typo in gen_swapr() Philippe Mathieu-Daudé
2023-08-22 13:42 ` [PATCH 0/7] tcg: Document *swap/deposit helpers Alex Bennée
2023-08-22 13:58 ` Peter Maydell
2023-08-22 14:43 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=09f4ba68-e7f3-8a90-e996-e475b760c64a@linaro.org \
--to=philmd@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).