* [RESEND PATCH v3 1/5] target/riscv: add thead-c908 cpu support
2025-12-15 17:01 [RESEND PATCH v3 0/5] Add K230 board and thead-c908 CPU support Chao Liu
@ 2025-12-15 17:01 ` Chao Liu
2025-12-15 17:01 ` [RESEND PATCH v3 2/5] hw/riscv: add k230 board initial support Chao Liu
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Chao Liu @ 2025-12-15 17:01 UTC (permalink / raw)
To: pbonzini, dbarboza, palmer, alistair.francis, liwei1518,
zhiwei_liu
Cc: qemu-riscv, qemu-devel, hust-os-kernel-patches, 1440332527,
3160104094, temashking, me, Chao Liu, Chao Liu, Conor Dooley
From: Chao Liu <chao.liu@zevorn.cn>
The C908 processor is based on the RV64GCB[V] instruction
set, compatible to RVA22 Profile and implements the XIE
(XuanTie Instruction Extension) technology.
Signed-off-by: Chao Liu <chao.liu.zevorn@gmail.com>
Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Conor Dooley <conor@kernel.org>
Reported-by: Peng Jiang <3160104094@zju.edu.cn>
---
target/riscv/cpu-qom.h | 2 +
target/riscv/cpu.c | 51 ++++++
target/riscv/th_csr.c | 380 ++++++++++++++++++++++++++++++++++++++++-
3 files changed, 432 insertions(+), 1 deletion(-)
diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h
index 75f4e43408..1ddb5a6a6c 100644
--- a/target/riscv/cpu-qom.h
+++ b/target/riscv/cpu-qom.h
@@ -52,6 +52,8 @@
#define TYPE_RISCV_CPU_SIFIVE_U34 RISCV_CPU_TYPE_NAME("sifive-u34")
#define TYPE_RISCV_CPU_SIFIVE_U54 RISCV_CPU_TYPE_NAME("sifive-u54")
#define TYPE_RISCV_CPU_THEAD_C906 RISCV_CPU_TYPE_NAME("thead-c906")
+#define TYPE_RISCV_CPU_THEAD_C908 RISCV_CPU_TYPE_NAME("thead-c908")
+#define TYPE_RISCV_CPU_THEAD_C908V RISCV_CPU_TYPE_NAME("thead-c908v")
#define TYPE_RISCV_CPU_VEYRON_V1 RISCV_CPU_TYPE_NAME("veyron-v1")
#define TYPE_RISCV_CPU_TT_ASCALON RISCV_CPU_TYPE_NAME("tt-ascalon")
#define TYPE_RISCV_CPU_XIANGSHAN_NANHU RISCV_CPU_TYPE_NAME("xiangshan-nanhu")
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 73d4280d7c..6c10e557da 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -3130,6 +3130,57 @@ static const TypeInfo riscv_cpu_type_infos[] = {
#endif
),
+ DEFINE_RISCV_CPU(TYPE_RISCV_CPU_THEAD_C908, TYPE_RISCV_VENDOR_CPU,
+ .misa_mxl_max = MXL_RV64,
+ .misa_ext = RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU,
+ .priv_spec = PRIV_VERSION_1_12_0,
+
+ /* ISA extensions */
+ .cfg.ext_xtheadba = true,
+ .cfg.ext_xtheadbb = true,
+ .cfg.ext_xtheadbs = true,
+ .cfg.ext_xtheadcmo = true,
+ .cfg.ext_xtheadcondmov = true,
+ .cfg.ext_xtheadfmv = true,
+ .cfg.ext_xtheadfmemidx = true,
+ .cfg.ext_xtheadmac = true,
+ .cfg.ext_xtheadmemidx = true,
+ .cfg.ext_xtheadmempair = true,
+ .cfg.ext_xtheadsync = true,
+ .cfg.ext_smepmp = true,
+ .cfg.ext_sscofpmf = true,
+ .cfg.ext_sstc = true,
+ .cfg.ext_svpbmt = true,
+ .cfg.ext_svinval = true,
+ .cfg.ext_svnapot = true,
+ .cfg.ext_zba = true,
+ .cfg.ext_zbb = true,
+ .cfg.ext_zbc = true,
+ .cfg.ext_zbs = true,
+ .cfg.ext_zkt = true,
+ .cfg.ext_zbkc = true,
+ .cfg.ext_zicsr = true,
+ .cfg.ext_zifencei = true,
+ .cfg.ext_zihintpause = true,
+ .cfg.ext_zicbom = true,
+ .cfg.ext_zicboz = true,
+
+ .cfg.pmp = true,
+ .cfg.mmu = true,
+ .cfg.max_satp_mode = VM_1_10_SV48,
+
+ .cfg.marchid = 0x8d143000,
+ .cfg.mvendorid = THEAD_VENDOR_ID,
+#ifndef CONFIG_USER_ONLY
+ .custom_csrs = th_csr_list,
+#endif
+ ),
+
+ DEFINE_RISCV_CPU(TYPE_RISCV_CPU_THEAD_C908V, TYPE_RISCV_CPU_THEAD_C908,
+ .misa_ext = RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU | RVV,
+ .vext_spec = VEXT_VERSION_1_00_0,
+ ),
+
DEFINE_RISCV_CPU(TYPE_RISCV_CPU_TT_ASCALON, TYPE_RISCV_VENDOR_CPU,
.misa_mxl_max = MXL_RV64,
.misa_ext = RVG | RVC | RVS | RVU | RVH | RVV,
diff --git a/target/riscv/th_csr.c b/target/riscv/th_csr.c
index 49eb7bbab5..3b59939f05 100644
--- a/target/riscv/th_csr.c
+++ b/target/riscv/th_csr.c
@@ -2,6 +2,9 @@
* T-Head-specific CSRs.
*
* Copyright (c) 2024 VRULL GmbH
+ * Copyright (c) 2025 Chao Liu <chao.liu@zevorn.cn>
+ *
+ * For more information, see XuanTie-C908-UserManual_xrvm_20240530.pdf
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -20,13 +23,88 @@
#include "cpu.h"
#include "cpu_vendorid.h"
-#define CSR_TH_SXSTATUS 0x5c0
+/* Extended M-mode control registers of T-Head */
+#define CSR_TH_MXSTATUS 0x7c0
+#define CSR_TH_MHCR 0x7c1
+#define CSR_TH_MCOR 0x7c2
+#define CSR_TH_MCCR2 0x7c3
+#define CSR_TH_MHINT 0x7c5
+#define CSR_TH_MRVBR 0x7c7
+#define CSR_TH_MCOUNTERWEN 0x7c9
+#define CSR_TH_MCOUNTERINTEN 0x7ca
+#define CSR_TH_MCOUNTEROF 0x7cb
+#define CSR_TH_MCINS 0x7d2
+#define CSR_TH_MCINDEX 0x7d3
+#define CSR_TH_MCDATA0 0x7d4
+#define CSR_TH_MCDATA1 0x7d5
+#define CSR_TH_MSMPR 0x7f3
+#define CSR_TH_CPUID 0xfc0
+#define CSR_TH_MAPBADDR 0xfc1
+
+/* TH_MXSTATUS bits */
+#define TH_MXSTATUS_UCME BIT(16)
+#define TH_MXSTATUS_MAEE BIT(21)
+#define TH_MXSTATUS_THEADISAEE BIT(22)
+
+/* Extended S-mode control registers of T-Head */
+#define CSR_TH_SXSTATUS 0x5c0
+#define CSR_TH_SHCR 0x5c1
+#define CSR_TH_SCER2 0x5c2
+#define CSR_TH_SCER 0x5c3
+#define CSR_TH_SCOUNTERINTEN 0x5c4
+#define CSR_TH_SCOUNTEROF 0x5c5
+#define CSR_TH_SCYCLE 0x5e0
+#define CSR_TH_SHPMCOUNTER3 0x5e3
+#define CSR_TH_SHPMCOUNTER4 0x5e4
+#define CSR_TH_SHPMCOUNTER5 0x5e5
+#define CSR_TH_SHPMCOUNTER6 0x5e6
+#define CSR_TH_SHPMCOUNTER7 0x5e7
+#define CSR_TH_SHPMCOUNTER8 0x5e8
+#define CSR_TH_SHPMCOUNTER9 0x5e9
+#define CSR_TH_SHPMCOUNTER10 0x5ea
+#define CSR_TH_SHPMCOUNTER11 0x5eb
+#define CSR_TH_SHPMCOUNTER12 0x5ec
+#define CSR_TH_SHPMCOUNTER13 0x5ed
+#define CSR_TH_SHPMCOUNTER14 0x5ee
+#define CSR_TH_SHPMCOUNTER15 0x5ef
+#define CSR_TH_SHPMCOUNTER16 0x5f0
+#define CSR_TH_SHPMCOUNTER17 0x5f1
+#define CSR_TH_SHPMCOUNTER18 0x5f2
+#define CSR_TH_SHPMCOUNTER19 0x5f3
+#define CSR_TH_SHPMCOUNTER20 0x5f4
+#define CSR_TH_SHPMCOUNTER21 0x5f5
+#define CSR_TH_SHPMCOUNTER22 0x5f6
+#define CSR_TH_SHPMCOUNTER23 0x5f7
+#define CSR_TH_SHPMCOUNTER24 0x5f8
+#define CSR_TH_SHPMCOUNTER25 0x5f9
+#define CSR_TH_SHPMCOUNTER26 0x5fa
+#define CSR_TH_SHPMCOUNTER27 0x5fb
+#define CSR_TH_SHPMCOUNTER28 0x5fc
+#define CSR_TH_SHPMCOUNTER29 0x5fd
+#define CSR_TH_SHPMCOUNTER30 0x5fe
+#define CSR_TH_SHPMCOUNTER31 0x5ff
+#define CSR_TH_SMIR 0x9c0
+#define CSR_TH_SMLO0 0x9c1
+#define CSR_TH_SMEH 0x9c2
+#define CSR_TH_SMCIR 0x9c3
+
+/* Extended U-mode control registers of T-Head */
+#define CSR_TH_FXCR 0x800
/* TH_SXSTATUS bits */
#define TH_SXSTATUS_UCME BIT(16)
#define TH_SXSTATUS_MAEE BIT(21)
#define TH_SXSTATUS_THEADISAEE BIT(22)
+static RISCVException mmode(CPURISCVState *env, int csrno)
+{
+ if (riscv_has_ext(env, RVM)) {
+ return RISCV_EXCP_NONE;
+ }
+
+ return RISCV_EXCP_ILLEGAL_INST;
+}
+
static RISCVException smode(CPURISCVState *env, int csrno)
{
if (riscv_has_ext(env, RVS)) {
@@ -36,11 +114,31 @@ static RISCVException smode(CPURISCVState *env, int csrno)
return RISCV_EXCP_ILLEGAL_INST;
}
+static RISCVException any(CPURISCVState *env, int csrno)
+{
+ return RISCV_EXCP_NONE;
+}
+
static bool test_thead_mvendorid(RISCVCPU *cpu)
{
return cpu->cfg.mvendorid == THEAD_VENDOR_ID;
}
+static RISCVException read_th_mxstatus(CPURISCVState *env, int csrno,
+ target_ulong *val)
+{
+ /* We don't set MAEE here, because QEMU does not implement MAEE. */
+ *val = TH_MXSTATUS_UCME | TH_MXSTATUS_THEADISAEE;
+ return RISCV_EXCP_NONE;
+}
+
+static RISCVException read_unimp_th_csr(CPURISCVState *env, int csrno,
+ target_ulong *val)
+{
+ *val = 0;
+ return RISCV_EXCP_NONE;
+}
+
static RISCVException read_th_sxstatus(CPURISCVState *env, int csrno,
target_ulong *val)
{
@@ -50,10 +148,290 @@ static RISCVException read_th_sxstatus(CPURISCVState *env, int csrno,
}
const RISCVCSR th_csr_list[] = {
+ {
+ .csrno = CSR_TH_MXSTATUS,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mxstatus", mmode, read_th_mxstatus }
+ },
+ {
+ .csrno = CSR_TH_MHCR,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mhcr", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MCOR,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mcor", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MCCR2,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mccr2", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MHINT,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mhint", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MRVBR,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mrvbr", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MCOUNTERWEN,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mcounterwen", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MCOUNTERINTEN,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mcounterinten", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MCOUNTEROF,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mcounterof", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MCINS,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mcins", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MCINDEX,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mcindex", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MCDATA0,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mcdata0", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MCDATA1,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mcdata1", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MSMPR,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.msmpr", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_CPUID,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.cpuid", mmode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_MAPBADDR,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.mapbaddr", mmode, read_unimp_th_csr }
+ },
{
.csrno = CSR_TH_SXSTATUS,
.insertion_test = test_thead_mvendorid,
.csr_ops = { "th.sxstatus", smode, read_th_sxstatus }
},
+ {
+ .csrno = CSR_TH_SHCR,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shcr", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SCER2,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.scer2", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SCER,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.scer", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SCOUNTERINTEN,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.scounterinten", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SCOUNTEROF,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.scounterof", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SCYCLE,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.scycle", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER3,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter3", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER4,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter4", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER5,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter5", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER6,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter6", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER7,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter7", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER8,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter8", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER9,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter9", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER10,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter10", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER11,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter11", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER12,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter12", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER13,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter13", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER14,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter14", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER15,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter15", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER16,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter16", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER17,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter17", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER18,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter18", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER19,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter19", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER20,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter20", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER21,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter21", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER22,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter22", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER23,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter23", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER24,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter24", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER25,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter25", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER26,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter26", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER27,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter27", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER28,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter28", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER29,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter29", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER30,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter30", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SHPMCOUNTER31,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.shpmcounter31", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SMIR,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.smir", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SMLO0,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.smlo0", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SMEH,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.smeh", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_SMCIR,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.smcir", smode, read_unimp_th_csr }
+ },
+ {
+ .csrno = CSR_TH_FXCR,
+ .insertion_test = test_thead_mvendorid,
+ .csr_ops = { "th.fxcr", any, read_unimp_th_csr }
+ },
{ }
};
--
2.51.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [RESEND PATCH v3 2/5] hw/riscv: add k230 board initial support
2025-12-15 17:01 [RESEND PATCH v3 0/5] Add K230 board and thead-c908 CPU support Chao Liu
2025-12-15 17:01 ` [RESEND PATCH v3 1/5] target/riscv: add thead-c908 cpu support Chao Liu
@ 2025-12-15 17:01 ` Chao Liu
2025-12-15 17:01 ` [RESEND PATCH v3 3/5] hw/watchdog: add k230 watchdog " Chao Liu
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Chao Liu @ 2025-12-15 17:01 UTC (permalink / raw)
To: pbonzini, dbarboza, palmer, alistair.francis, liwei1518,
zhiwei_liu
Cc: qemu-riscv, qemu-devel, hust-os-kernel-patches, 1440332527,
3160104094, temashking, me, Chao Liu, Chao Liu
From: Chao Liu <chao.liu@zevorn.cn>
K230 Board Compatible with kendryte K230 SDK.
Preliminarily supports the C908 small core, which can
run the U-Boot and Linux kernel compiled by the K230 SDK.
Signed-off-by: Chao Liu <chao.liu.zevorn@gmail.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reported-by: Peng Jiang <3160104094@zju.edu.cn>
---
MAINTAINERS | 8 +-
hw/riscv/Kconfig | 10 +
hw/riscv/k230.c | 483 ++++++++++++++++++++++++++++++++++++++++
hw/riscv/meson.build | 2 +-
include/hw/riscv/k230.h | 149 +++++++++++++
5 files changed, 650 insertions(+), 2 deletions(-)
create mode 100644 hw/riscv/k230.c
create mode 100644 include/hw/riscv/k230.h
diff --git a/MAINTAINERS b/MAINTAINERS
index d007584b47..4bc5442eff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1737,6 +1737,12 @@ F: docs/system/riscv/xiangshan-kunminghu.rst
F: hw/riscv/xiangshan_kmh.c
F: include/hw/riscv/xiangshan_kmh.h
+K230 Machines
+M: Chao Liu <chao.liu.zevorn@gmail.com>
+S: Maintained
+F: hw/riscv/k230.c
+F: include/hw/riscv/k230.h
+
RX Machines
-----------
rx-gdbsim
@@ -3545,7 +3551,7 @@ R: Paolo Bonzini <pbonzini@redhat.com>
R: Bandan Das <bsd@redhat.com>
R: Stefan Hajnoczi <stefanha@redhat.com>
R: Fabiano Rosas <farosas@suse.de>
-R: Darren Kenny <darren.kenny@oracle.com>
+R: Darren Kenny <darren.kenny@oracle.com>
R: Qiuhao Li <Qiuhao.Li@outlook.com>
S: Maintained
F: tests/qtest/fuzz/
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index fc9c35bd98..624f166244 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -128,3 +128,13 @@ config XIANGSHAN_KUNMINGHU
select RISCV_APLIC
select RISCV_IMSIC
select SERIAL_MM
+
+config K230
+ bool
+ default y
+ depends on RISCV64
+ select RISCV_ACLINT
+ select RISCV_APLIC
+ select RISCV_IMSIC
+ select SERIAL_MM
+ select UNIMP
\ No newline at end of file
diff --git a/hw/riscv/k230.c b/hw/riscv/k230.c
new file mode 100644
index 0000000000..e1780e4f0b
--- /dev/null
+++ b/hw/riscv/k230.c
@@ -0,0 +1,483 @@
+/*
+ * QEMU RISC-V Virt Board Compatible with Kendryte K230 SDK
+ *
+ * Copyright (c) 2025 Chao Liu <chao.liu@zevorn.cn>
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Provides a board compatible with the Kendryte K230 SDK
+ *
+ * Documentation: K230_Technical_Reference_Manual_V0.3.1_20241118.pdf
+ *
+ * For more information, see <https://www.kendryte.com/en/proDetail/230>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "cpu-qom.h"
+#include "qemu/cutils.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include "system/system.h"
+#include "system/memory.h"
+#include "target/riscv/cpu.h"
+#include "chardev/char.h"
+#include "hw/loader.h"
+#include "hw/sysbus.h"
+#include "hw/riscv/k230.h"
+#include "hw/riscv/boot.h"
+#include "hw/intc/riscv_aclint.h"
+#include "hw/intc/sifive_plic.h"
+#include "hw/char/serial-mm.h"
+#include "hw/misc/unimp.h"
+
+static const MemMapEntry memmap[] = {
+ [K230_DEV_DDRC] = { 0x00000000, 0x80000000 },
+ [K230_DEV_KPU_L2_CACHE] = { 0x80000000, 0x00200000 },
+ [K230_DEV_SRAM] = { 0x80200000, 0x00200000 },
+ [K230_DEV_KPU_CFG] = { 0x80400000, 0x00000800 },
+ [K230_DEV_FFT] = { 0x80400800, 0x00000400 },
+ [K230_DEV_AI_2D_ENGINE] = { 0x80400C00, 0x00000800 },
+ [K230_DEV_GSDMA] = { 0x80800000, 0x00004000 },
+ [K230_DEV_DMA] = { 0x80804000, 0x00004000 },
+ [K230_DEV_DECOMP_GZIP] = { 0x80808000, 0x00004000 },
+ [K230_DEV_NON_AI_2D] = { 0x8080C000, 0x00004000 },
+ [K230_DEV_ISP] = { 0x90000000, 0x00008000 },
+ [K230_DEV_DEWARP] = { 0x90008000, 0x00001000 },
+ [K230_DEV_RX_CSI] = { 0x90009000, 0x00002000 },
+ [K230_DEV_H264] = { 0x90400000, 0x00010000 },
+ [K230_DEV_2P5D] = { 0x90800000, 0x00040000 },
+ [K230_DEV_VO] = { 0x90840000, 0x00010000 },
+ [K230_DEV_VO_CFG] = { 0x90850000, 0x00001000 },
+ [K230_DEV_3D_ENGINE] = { 0x90A00000, 0x00000800 },
+ [K230_DEV_PMU] = { 0x91000000, 0x00000C00 },
+ [K230_DEV_RTC] = { 0x91000C00, 0x00000400 },
+ [K230_DEV_CMU] = { 0x91100000, 0x00001000 },
+ [K230_DEV_RMU] = { 0x91101000, 0x00001000 },
+ [K230_DEV_BOOT] = { 0x91102000, 0x00001000 },
+ [K230_DEV_PWR] = { 0x91103000, 0x00001000 },
+ [K230_DEV_MAILBOX] = { 0x91104000, 0x00001000 },
+ [K230_DEV_IOMUX] = { 0x91105000, 0x00000800 },
+ [K230_DEV_TIMER] = { 0x91105800, 0x00000800 },
+ [K230_DEV_WDT0] = { 0x91106000, 0x00000800 },
+ [K230_DEV_WDT1] = { 0x91106800, 0x00000800 },
+ [K230_DEV_TS] = { 0x91107000, 0x00000800 },
+ [K230_DEV_HDI] = { 0x91107800, 0x00000800 },
+ [K230_DEV_STC] = { 0x91108000, 0x00000800 },
+ [K230_DEV_BOOTROM] = { 0x91200000, 0x00010000 },
+ [K230_DEV_SECURITY] = { 0x91210000, 0x00008000 },
+ [K230_DEV_UART0] = { 0x91400000, 0x00001000 },
+ [K230_DEV_UART1] = { 0x91401000, 0x00001000 },
+ [K230_DEV_UART2] = { 0x91402000, 0x00001000 },
+ [K230_DEV_UART3] = { 0x91403000, 0x00001000 },
+ [K230_DEV_UART4] = { 0x91404000, 0x00001000 },
+ [K230_DEV_I2C0] = { 0x91405000, 0x00001000 },
+ [K230_DEV_I2C1] = { 0x91406000, 0x00001000 },
+ [K230_DEV_I2C2] = { 0x91407000, 0x00001000 },
+ [K230_DEV_I2C3] = { 0x91408000, 0x00001000 },
+ [K230_DEV_I2C4] = { 0x91409000, 0x00001000 },
+ [K230_DEV_PWM] = { 0x9140A000, 0x00001000 },
+ [K230_DEV_GPIO0] = { 0x9140B000, 0x00001000 },
+ [K230_DEV_GPIO1] = { 0x9140C000, 0x00001000 },
+ [K230_DEV_ADC] = { 0x9140D000, 0x00001000 },
+ [K230_DEV_CODEC] = { 0x9140E000, 0x00001000 },
+ [K230_DEV_I2S] = { 0x9140F000, 0x00001000 },
+ [K230_DEV_USB0] = { 0x91500000, 0x00010000 },
+ [K230_DEV_USB1] = { 0x91540000, 0x00010000 },
+ [K230_DEV_SD0] = { 0x91580000, 0x00001000 },
+ [K230_DEV_SD1] = { 0x91581000, 0x00001000 },
+ [K230_DEV_QSPI0] = { 0x91582000, 0x00001000 },
+ [K230_DEV_QSPI1] = { 0x91583000, 0x00001000 },
+ [K230_DEV_SPI] = { 0x91584000, 0x00001000 },
+ [K230_DEV_HI_SYS_CFG] = { 0x91585000, 0x00000400 },
+ [K230_DEV_DDRC_CFG] = { 0x98000000, 0x02000000 },
+ [K230_DEV_FLASH] = { 0xC0000000, 0x08000000 },
+ [K230_DEV_PLIC] = { 0xF00000000, 0x00400000 },
+ [K230_DEV_CLINT] = { 0xF04000000, 0x00400000 },
+};
+
+static void k230_soc_init(Object *obj)
+{
+ K230SoCState *s = RISCV_K230_SOC(obj);
+ RISCVHartArrayState *cpu0 = &s->c908_cpu;
+
+ object_initialize_child(obj, "c908-cpu", cpu0, TYPE_RISCV_HART_ARRAY);
+ qdev_prop_set_uint32(DEVICE(cpu0), "hartid-base", 0);
+ qdev_prop_set_string(DEVICE(cpu0), "cpu-type", TYPE_RISCV_CPU_THEAD_C908);
+ qdev_prop_set_uint64(DEVICE(cpu0), "resetvec",
+ memmap[K230_DEV_BOOTROM].base);
+}
+
+static DeviceState *k230_create_plic(int base_hartid, int hartid_count)
+{
+ g_autofree char *plic_hart_config = NULL;
+
+ /* Per-socket PLIC hart topology configuration string */
+ plic_hart_config = riscv_plic_hart_config_string(hartid_count);
+
+ /* Per-socket PLIC */
+ return sifive_plic_create(memmap[K230_DEV_PLIC].base,
+ plic_hart_config, hartid_count, base_hartid,
+ K230_PLIC_NUM_SOURCES,
+ K230_PLIC_NUM_PRIORITIES,
+ K230_PLIC_PRIORITY_BASE, K230_PLIC_PENDING_BASE,
+ K230_PLIC_ENABLE_BASE, K230_PLIC_ENABLE_STRIDE,
+ K230_PLIC_CONTEXT_BASE,
+ K230_PLIC_CONTEXT_STRIDE,
+ memmap[K230_DEV_PLIC].size);
+}
+
+static void k230_soc_realize(DeviceState *dev, Error **errp)
+{
+ K230SoCState *s = RISCV_K230_SOC(dev);
+ MemoryRegion *sys_mem = get_system_memory();
+ int c908_cpus;
+
+ sysbus_realize(SYS_BUS_DEVICE(&s->c908_cpu), &error_fatal);
+
+ c908_cpus = s->c908_cpu.num_harts;
+
+ /* SRAM */
+ memory_region_init_ram(&s->sram, OBJECT(dev), "sram",
+ memmap[K230_DEV_SRAM].size, &error_fatal);
+ memory_region_add_subregion(sys_mem, memmap[K230_DEV_SRAM].base,
+ &s->sram);
+
+ /* BootROM */
+ memory_region_init_rom(&s->bootrom, OBJECT(dev), "bootrom",
+ memmap[K230_DEV_BOOTROM].size, &error_fatal);
+ memory_region_add_subregion(sys_mem, memmap[K230_DEV_BOOTROM].base,
+ &s->bootrom);
+
+ /* PLIC */
+ s->c908_plic = k230_create_plic(C908_CPU_HARTID, c908_cpus);
+
+ /* CLINT */
+ riscv_aclint_swi_create(memmap[K230_DEV_CLINT].base,
+ C908_CPU_HARTID, c908_cpus, false);
+ riscv_aclint_mtimer_create(memmap[K230_DEV_CLINT].base + 0x4000,
+ RISCV_ACLINT_DEFAULT_MTIMER_SIZE,
+ C908_CPU_HARTID, c908_cpus,
+ RISCV_ACLINT_DEFAULT_MTIMECMP,
+ RISCV_ACLINT_DEFAULT_MTIME,
+ RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true);
+
+ /* UART */
+ serial_mm_init(sys_mem, memmap[K230_DEV_UART0].base, 2,
+ qdev_get_gpio_in(DEVICE(s->c908_plic), K230_UART0_IRQ),
+ 399193, serial_hd(0), DEVICE_LITTLE_ENDIAN);
+ serial_mm_init(sys_mem, memmap[K230_DEV_UART1].base, 2,
+ qdev_get_gpio_in(DEVICE(s->c908_plic), K230_UART1_IRQ),
+ 399193, serial_hd(1), DEVICE_LITTLE_ENDIAN);
+ serial_mm_init(sys_mem, memmap[K230_DEV_UART2].base, 2,
+ qdev_get_gpio_in(DEVICE(s->c908_plic), K230_UART2_IRQ),
+ 399193, serial_hd(2), DEVICE_LITTLE_ENDIAN);
+ serial_mm_init(sys_mem, memmap[K230_DEV_UART3].base, 2,
+ qdev_get_gpio_in(DEVICE(s->c908_plic), K230_UART3_IRQ),
+ 399193, serial_hd(3), DEVICE_LITTLE_ENDIAN);
+ serial_mm_init(sys_mem, memmap[K230_DEV_UART4].base, 2,
+ qdev_get_gpio_in(DEVICE(s->c908_plic), K230_UART4_IRQ),
+ 399193, serial_hd(4), DEVICE_LITTLE_ENDIAN);
+
+ /* unimplemented devices */
+ create_unimplemented_device("kpu.l2-cache",
+ memmap[K230_DEV_KPU_L2_CACHE].base,
+ memmap[K230_DEV_KPU_L2_CACHE].size);
+
+ create_unimplemented_device("kpu_cfg", memmap[K230_DEV_KPU_CFG].base,
+ memmap[K230_DEV_KPU_CFG].size);
+
+ create_unimplemented_device("fft", memmap[K230_DEV_FFT].base,
+ memmap[K230_DEV_FFT].size);
+
+ create_unimplemented_device("2d-engine.ai",
+ memmap[K230_DEV_AI_2D_ENGINE].base,
+ memmap[K230_DEV_AI_2D_ENGINE].size);
+
+ create_unimplemented_device("gsdma", memmap[K230_DEV_GSDMA].base,
+ memmap[K230_DEV_GSDMA].size);
+
+ create_unimplemented_device("dma", memmap[K230_DEV_DMA].base,
+ memmap[K230_DEV_DMA].size);
+
+ create_unimplemented_device("decomp-gzip",
+ memmap[K230_DEV_DECOMP_GZIP].base,
+ memmap[K230_DEV_DECOMP_GZIP].size);
+
+ create_unimplemented_device("2d-engine.non-ai",
+ memmap[K230_DEV_NON_AI_2D].base,
+ memmap[K230_DEV_NON_AI_2D].size);
+
+ create_unimplemented_device("isp", memmap[K230_DEV_ISP].base,
+ memmap[K230_DEV_ISP].size);
+
+ create_unimplemented_device("dewarp", memmap[K230_DEV_DEWARP].base,
+ memmap[K230_DEV_DEWARP].size);
+
+ create_unimplemented_device("rx-csi", memmap[K230_DEV_RX_CSI].base,
+ memmap[K230_DEV_RX_CSI].size);
+
+ create_unimplemented_device("vpu", memmap[K230_DEV_H264].base,
+ memmap[K230_DEV_H264].size);
+
+ create_unimplemented_device("gpu", memmap[K230_DEV_2P5D].base,
+ memmap[K230_DEV_2P5D].size);
+
+ create_unimplemented_device("vo", memmap[K230_DEV_VO].base,
+ memmap[K230_DEV_VO].size);
+
+ create_unimplemented_device("vo_cfg", memmap[K230_DEV_VO_CFG].base,
+ memmap[K230_DEV_VO_CFG].size);
+
+ create_unimplemented_device("3d-engine", memmap[K230_DEV_3D_ENGINE].base,
+ memmap[K230_DEV_3D_ENGINE].size);
+
+ create_unimplemented_device("pmu", memmap[K230_DEV_PMU].base,
+ memmap[K230_DEV_PMU].size);
+
+ create_unimplemented_device("rtc", memmap[K230_DEV_RTC].base,
+ memmap[K230_DEV_RTC].size);
+
+ create_unimplemented_device("cmu", memmap[K230_DEV_CMU].base,
+ memmap[K230_DEV_CMU].size);
+
+ create_unimplemented_device("rmu", memmap[K230_DEV_RMU].base,
+ memmap[K230_DEV_RMU].size);
+
+ create_unimplemented_device("boot", memmap[K230_DEV_BOOT].base,
+ memmap[K230_DEV_BOOT].size);
+
+ create_unimplemented_device("pwr", memmap[K230_DEV_PWR].base,
+ memmap[K230_DEV_PWR].size);
+
+ create_unimplemented_device("ipcm", memmap[K230_DEV_MAILBOX].base,
+ memmap[K230_DEV_MAILBOX].size);
+
+ create_unimplemented_device("iomux", memmap[K230_DEV_IOMUX].base,
+ memmap[K230_DEV_IOMUX].size);
+
+ create_unimplemented_device("timer", memmap[K230_DEV_TIMER].base,
+ memmap[K230_DEV_TIMER].size);
+
+ create_unimplemented_device("wdt0", memmap[K230_DEV_WDT0].base,
+ memmap[K230_DEV_WDT0].size);
+
+ create_unimplemented_device("wdt1", memmap[K230_DEV_WDT1].base,
+ memmap[K230_DEV_WDT1].size);
+
+ create_unimplemented_device("ts", memmap[K230_DEV_TS].base,
+ memmap[K230_DEV_TS].size);
+
+ create_unimplemented_device("hdi", memmap[K230_DEV_HDI].base,
+ memmap[K230_DEV_HDI].size);
+
+ create_unimplemented_device("stc", memmap[K230_DEV_STC].base,
+ memmap[K230_DEV_STC].size);
+
+ create_unimplemented_device("security", memmap[K230_DEV_SECURITY].base,
+ memmap[K230_DEV_SECURITY].size);
+
+ create_unimplemented_device("i2c0", memmap[K230_DEV_I2C0].base,
+ memmap[K230_DEV_I2C0].size);
+
+ create_unimplemented_device("i2c1", memmap[K230_DEV_I2C1].base,
+ memmap[K230_DEV_I2C1].size);
+
+ create_unimplemented_device("i2c2", memmap[K230_DEV_I2C2].base,
+ memmap[K230_DEV_I2C2].size);
+
+ create_unimplemented_device("i2c3", memmap[K230_DEV_I2C3].base,
+ memmap[K230_DEV_I2C3].size);
+
+ create_unimplemented_device("i2c4", memmap[K230_DEV_I2C4].base,
+ memmap[K230_DEV_I2C4].size);
+
+ create_unimplemented_device("pwm", memmap[K230_DEV_PWM].base,
+ memmap[K230_DEV_PWM].size);
+
+ create_unimplemented_device("gpio0", memmap[K230_DEV_GPIO0].base,
+ memmap[K230_DEV_GPIO0].size);
+
+ create_unimplemented_device("gpio1", memmap[K230_DEV_GPIO1].base,
+ memmap[K230_DEV_GPIO1].size);
+
+ create_unimplemented_device("adc", memmap[K230_DEV_ADC].base,
+ memmap[K230_DEV_ADC].size);
+
+ create_unimplemented_device("codec", memmap[K230_DEV_CODEC].base,
+ memmap[K230_DEV_CODEC].size);
+
+ create_unimplemented_device("i2s", memmap[K230_DEV_I2S].base,
+ memmap[K230_DEV_I2S].size);
+
+ create_unimplemented_device("usb0", memmap[K230_DEV_USB0].base,
+ memmap[K230_DEV_USB0].size);
+
+ create_unimplemented_device("usb1", memmap[K230_DEV_USB1].base,
+ memmap[K230_DEV_USB1].size);
+
+ create_unimplemented_device("sd0", memmap[K230_DEV_SD0].base,
+ memmap[K230_DEV_SD0].size);
+
+ create_unimplemented_device("sd1", memmap[K230_DEV_SD1].base,
+ memmap[K230_DEV_SD1].size);
+
+ create_unimplemented_device("qspi0", memmap[K230_DEV_QSPI0].base,
+ memmap[K230_DEV_QSPI0].size);
+
+ create_unimplemented_device("qspi1", memmap[K230_DEV_QSPI1].base,
+ memmap[K230_DEV_QSPI1].size);
+
+ create_unimplemented_device("spi", memmap[K230_DEV_SPI].base,
+ memmap[K230_DEV_SPI].size);
+
+ create_unimplemented_device("hi_sys_cfg", memmap[K230_DEV_HI_SYS_CFG].base,
+ memmap[K230_DEV_HI_SYS_CFG].size);
+
+ create_unimplemented_device("ddrc_cfg", memmap[K230_DEV_DDRC_CFG].base,
+ memmap[K230_DEV_DDRC_CFG].size);
+
+ create_unimplemented_device("flash", memmap[K230_DEV_FLASH].base,
+ memmap[K230_DEV_FLASH].size);
+}
+
+static void k230_soc_class_init(ObjectClass *oc, const void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = k230_soc_realize;
+}
+
+static const TypeInfo k230_soc_type_info = {
+ .name = TYPE_RISCV_K230_SOC,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(K230SoCState),
+ .instance_init = k230_soc_init,
+ .class_init = k230_soc_class_init,
+};
+
+static void k230_soc_register_types(void)
+{
+ type_register_static(&k230_soc_type_info);
+}
+
+type_init(k230_soc_register_types)
+
+static void k230_machine_done(Notifier *notifier, void *data)
+{
+ K230MachineState *s = container_of(notifier, K230MachineState,
+ machine_done);
+ MachineState *machine = MACHINE(s);
+ hwaddr start_addr = memmap[K230_DEV_DDRC].base;
+ target_ulong firmware_end_addr, kernel_start_addr;
+ const char *firmware_name = riscv_default_firmware_name(&s->soc.c908_cpu);
+ uint64_t kernel_entry = 0;
+ RISCVBootInfo boot_info;
+
+ firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
+ &start_addr, NULL);
+
+ /* Mask ROM reset vector */
+ uint32_t reset_vec[] = {
+ /* 0x91200000: auipc t0, 0x0 */ 0x00000297,
+ /* 0x91200004: addi t0, t0, 36 # <trap> */ 0x02428293,
+ /* 0x91200008: csrw mtvec, t0 */ 0x30529073,
+ /* 0x9120000C: csrr a0, misa */ 0x301012F3,
+ /* 0x91200010: lui t0, 0x1 */ 0x000012B7,
+ /* 0x91200014: slli t0, t0, 1 */ 0x00129293,
+ /* 0x91200018: and t0, a0, t0 */ 0x005572B3,
+ /* 0x9120001C: bnez t0, loop */ 0x00511063,
+ /* entry: */
+ /* 0x91200020: addiw t0, zero, 1 */ 0x0010029b,
+ /* 0x91200024: slli t0, t0, 0x1b */ 0x01b29293,
+ /* 0x91200028: jr t0 # uboot 0x8000000 */ 0x00028067,
+ /* loop: */
+ /* 0x9120002C: j 0x9120002C # <loop> */ 0x0000006f,
+ /* trap: */
+ /* 0x91200030: j 0x91200030 # <trap> */ 0x0000006f,
+ };
+
+ /* copy in the reset vector in little_endian byte order */
+ for (int i = 0; i < sizeof(reset_vec) >> 2; i++) {
+ reset_vec[i] = cpu_to_le32(reset_vec[i]);
+ }
+ rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
+ memmap[K230_DEV_BOOTROM].base, &address_space_memory);
+
+ riscv_boot_info_init(&boot_info, &s->soc.c908_cpu);
+
+ if (machine->kernel_filename && !kernel_entry) {
+ kernel_start_addr = riscv_calc_kernel_start_addr(&boot_info,
+ firmware_end_addr);
+ riscv_load_kernel(machine, &boot_info, kernel_start_addr,
+ true, NULL);
+ kernel_entry = boot_info.image_low_addr;
+ }
+}
+
+static void k230_machine_init(MachineState *machine)
+{
+ MachineClass *mc = MACHINE_GET_CLASS(machine);
+
+ K230MachineState *s = RISCV_K230_MACHINE(machine);
+ MemoryRegion *sys_mem = get_system_memory();
+
+ if (machine->ram_size < mc->default_ram_size) {
+ char *sz = size_to_str(mc->default_ram_size);
+ error_report("Invalid RAM size, should be %s", sz);
+ g_free(sz);
+ exit(EXIT_FAILURE);
+ }
+
+ /* Initialize SoC */
+ object_initialize_child(OBJECT(machine), "soc", &s->soc,
+ TYPE_RISCV_K230_SOC);
+ qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
+
+ /* Data Memory */
+ memory_region_add_subregion(sys_mem, memmap[K230_DEV_DDRC].base,
+ machine->ram);
+
+ s->machine_done.notify = k230_machine_done;
+ qemu_add_machine_init_done_notifier(&s->machine_done);
+}
+
+static void k230_machine_instance_init(Object *obj)
+{
+}
+
+static void k230_machine_class_init(ObjectClass *oc, const void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+
+ mc->desc = "RISC-V Board compatible with Kendryte K230 SDK";
+ mc->init = k230_machine_init;
+ mc->default_cpus = 2;
+ mc->default_ram_id = "riscv.K230.ram"; /* DDR */
+ mc->default_ram_size = memmap[K230_DEV_DDRC].size;
+}
+
+static const TypeInfo k230_machine_typeinfo = {
+ .name = TYPE_RISCV_K230_MACHINE,
+ .parent = TYPE_MACHINE,
+ .class_init = k230_machine_class_init,
+ .instance_init = k230_machine_instance_init,
+ .instance_size = sizeof(K230MachineState),
+};
+
+static void k230_machine_init_register_types(void)
+{
+ type_register_static(&k230_machine_typeinfo);
+}
+
+type_init(k230_machine_init_register_types)
diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build
index 2a8d5b136c..1e5ce511d4 100644
--- a/hw/riscv/meson.build
+++ b/hw/riscv/meson.build
@@ -14,5 +14,5 @@ riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files(
'riscv-iommu.c', 'riscv-iommu-pci.c', 'riscv-iommu-sys.c', 'riscv-iommu-hpm.c'))
riscv_ss.add(when: 'CONFIG_MICROBLAZE_V', if_true: files('microblaze-v-generic.c'))
riscv_ss.add(when: 'CONFIG_XIANGSHAN_KUNMINGHU', if_true: files('xiangshan_kmh.c'))
-
+riscv_ss.add(when: 'CONFIG_K230', if_true: files('k230.c'))
hw_arch += {'riscv': riscv_ss}
diff --git a/include/hw/riscv/k230.h b/include/hw/riscv/k230.h
new file mode 100644
index 0000000000..3158381e8f
--- /dev/null
+++ b/include/hw/riscv/k230.h
@@ -0,0 +1,149 @@
+/*
+ * QEMU RISC-V Virt Board Compatible with kendryte K230 SDK
+ *
+ * Copyright (c) 2025 Chao Liu <chao.liu@zevorn.cn>
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Provides a board compatible with the kendryte K230 SDK
+ *
+ * Documentation: K230_Technical_Reference_Manual_V0.3.1_20241118.pdf
+ *
+ * For more information, see <https://www.kendryte.com/en/proDetail/230>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef HW_K230_H
+#define HW_K230_H
+
+#include "hw/boards.h"
+#include "hw/riscv/riscv_hart.h"
+
+#define C908_CPU_HARTID (0)
+
+#define TYPE_RISCV_K230_SOC "riscv.k230.soc"
+#define RISCV_K230_SOC(obj) \
+ OBJECT_CHECK(K230SoCState, (obj), TYPE_RISCV_K230_SOC)
+
+typedef struct K230SoCState {
+ /*< private >*/
+ DeviceState parent_obj;
+
+ /*< public >*/
+ RISCVHartArrayState c908_cpu; /* Small core */
+
+ MemoryRegion sram;
+ MemoryRegion bootrom;
+
+ DeviceState *c908_plic;
+} K230SoCState;
+
+#define TYPE_RISCV_K230_MACHINE MACHINE_TYPE_NAME("k230")
+#define RISCV_K230_MACHINE(obj) \
+ OBJECT_CHECK(K230MachineState, (obj), TYPE_RISCV_K230_MACHINE)
+
+typedef struct K230MachineState {
+ /*< private >*/
+ MachineState parent_obj;
+
+ /*< public >*/
+ K230SoCState soc;
+ Notifier machine_done;
+} K230MachineState;
+
+enum {
+ K230_DEV_DDRC,
+ K230_DEV_KPU_L2_CACHE,
+ K230_DEV_SRAM,
+ K230_DEV_KPU_CFG,
+ K230_DEV_FFT,
+ K230_DEV_AI_2D_ENGINE,
+ K230_DEV_GSDMA,
+ K230_DEV_DMA,
+ K230_DEV_DECOMP_GZIP,
+ K230_DEV_NON_AI_2D,
+ K230_DEV_ISP,
+ K230_DEV_DEWARP,
+ K230_DEV_RX_CSI,
+ K230_DEV_H264,
+ K230_DEV_2P5D,
+ K230_DEV_VO,
+ K230_DEV_VO_CFG,
+ K230_DEV_3D_ENGINE,
+ K230_DEV_PMU,
+ K230_DEV_RTC,
+ K230_DEV_CMU,
+ K230_DEV_RMU,
+ K230_DEV_BOOT,
+ K230_DEV_PWR,
+ K230_DEV_MAILBOX,
+ K230_DEV_IOMUX,
+ K230_DEV_TIMER,
+ K230_DEV_WDT0,
+ K230_DEV_WDT1,
+ K230_DEV_TS,
+ K230_DEV_HDI,
+ K230_DEV_STC,
+ K230_DEV_BOOTROM,
+ K230_DEV_SECURITY,
+ K230_DEV_UART0,
+ K230_DEV_UART1,
+ K230_DEV_UART2,
+ K230_DEV_UART3,
+ K230_DEV_UART4,
+ K230_DEV_I2C0,
+ K230_DEV_I2C1,
+ K230_DEV_I2C2,
+ K230_DEV_I2C3,
+ K230_DEV_I2C4,
+ K230_DEV_PWM,
+ K230_DEV_GPIO0,
+ K230_DEV_GPIO1,
+ K230_DEV_ADC,
+ K230_DEV_CODEC,
+ K230_DEV_I2S,
+ K230_DEV_USB0,
+ K230_DEV_USB1,
+ K230_DEV_SD0,
+ K230_DEV_SD1,
+ K230_DEV_QSPI0,
+ K230_DEV_QSPI1,
+ K230_DEV_SPI,
+ K230_DEV_HI_SYS_CFG,
+ K230_DEV_DDRC_CFG,
+ K230_DEV_FLASH,
+ K230_DEV_PLIC,
+ K230_DEV_CLINT,
+};
+
+enum {
+ K230_UART0_IRQ = 16,
+ K230_UART1_IRQ = 17,
+ K230_UART2_IRQ = 18,
+ K230_UART3_IRQ = 19,
+ K230_UART4_IRQ = 20,
+};
+
+/*
+ * Integrates with the interrupt controller (PLIC),
+ * which can process 208 interrupt external sources
+ */
+#define K230_PLIC_NUM_SOURCES 208
+#define K230_PLIC_NUM_PRIORITIES 7
+#define K230_PLIC_PRIORITY_BASE 0x00
+#define K230_PLIC_PENDING_BASE 0x1000
+#define K230_PLIC_ENABLE_BASE 0x2000
+#define K230_PLIC_ENABLE_STRIDE 0x80
+#define K230_PLIC_CONTEXT_BASE 0x200000
+#define K230_PLIC_CONTEXT_STRIDE 0x1000
+
+#endif
--
2.51.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [RESEND PATCH v3 3/5] hw/watchdog: add k230 watchdog initial support
2025-12-15 17:01 [RESEND PATCH v3 0/5] Add K230 board and thead-c908 CPU support Chao Liu
2025-12-15 17:01 ` [RESEND PATCH v3 1/5] target/riscv: add thead-c908 cpu support Chao Liu
2025-12-15 17:01 ` [RESEND PATCH v3 2/5] hw/riscv: add k230 board initial support Chao Liu
@ 2025-12-15 17:01 ` Chao Liu
2025-12-15 17:01 ` [RESEND PATCH v3 4/5] tests/qtest: add test for K230 watchdog Chao Liu
2025-12-15 17:01 ` [RESEND PATCH v3 5/5] docs/system/riscv: add documentation for k230 machine Chao Liu
4 siblings, 0 replies; 6+ messages in thread
From: Chao Liu @ 2025-12-15 17:01 UTC (permalink / raw)
To: pbonzini, dbarboza, palmer, alistair.francis, liwei1518,
zhiwei_liu
Cc: qemu-riscv, qemu-devel, hust-os-kernel-patches, 1440332527,
3160104094, temashking, me, Chao Liu, Chao Liu
From: Chao Liu <chao.liu@zevorn.cn>
Add programmable Watchdog Timer (WDT) peripheral for K230 machine.
Signed-off-by: Mig Yang <temashking@foxmail.com>
Signed-off-by: Chao Liu <chao.liu.zevorn@gmail.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
MAINTAINERS | 2 +
hw/riscv/Kconfig | 3 +-
hw/riscv/k230.c | 18 ++
hw/watchdog/Kconfig | 4 +
hw/watchdog/k230_wdt.c | 307 +++++++++++++++++++++++++++++++++
hw/watchdog/meson.build | 1 +
hw/watchdog/trace-events | 9 +
include/hw/riscv/k230.h | 4 +
include/hw/watchdog/k230_wdt.h | 130 ++++++++++++++
9 files changed, 477 insertions(+), 1 deletion(-)
create mode 100644 hw/watchdog/k230_wdt.c
create mode 100644 include/hw/watchdog/k230_wdt.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 4bc5442eff..7973785525 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1741,7 +1741,9 @@ K230 Machines
M: Chao Liu <chao.liu.zevorn@gmail.com>
S: Maintained
F: hw/riscv/k230.c
+F: hw/watchdog/k230_wdt.c
F: include/hw/riscv/k230.h
+F: include/hw/watchdog/k230_wdt.h
RX Machines
-----------
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index 624f166244..6faaa5cccc 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -137,4 +137,5 @@ config K230
select RISCV_APLIC
select RISCV_IMSIC
select SERIAL_MM
- select UNIMP
\ No newline at end of file
+ select UNIMP
+ select K230_WDT
\ No newline at end of file
diff --git a/hw/riscv/k230.c b/hw/riscv/k230.c
index e1780e4f0b..6817aa7d3e 100644
--- a/hw/riscv/k230.c
+++ b/hw/riscv/k230.c
@@ -112,6 +112,9 @@ static void k230_soc_init(Object *obj)
RISCVHartArrayState *cpu0 = &s->c908_cpu;
object_initialize_child(obj, "c908-cpu", cpu0, TYPE_RISCV_HART_ARRAY);
+ object_initialize_child(obj, "k230-wdt0", &s->wdt[0], TYPE_K230_WDT);
+ object_initialize_child(obj, "k230-wdt1", &s->wdt[1], TYPE_K230_WDT);
+
qdev_prop_set_uint32(DEVICE(cpu0), "hartid-base", 0);
qdev_prop_set_string(DEVICE(cpu0), "cpu-type", TYPE_RISCV_CPU_THEAD_C908);
qdev_prop_set_uint64(DEVICE(cpu0), "resetvec",
@@ -189,6 +192,21 @@ static void k230_soc_realize(DeviceState *dev, Error **errp)
qdev_get_gpio_in(DEVICE(s->c908_plic), K230_UART4_IRQ),
399193, serial_hd(4), DEVICE_LITTLE_ENDIAN);
+ /* Watchdog */
+ for (int i = 0; i < 2; i++) {
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
+ return;
+ }
+ }
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[0]), 0, memmap[K230_DEV_WDT0].base);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[0]), 0,
+ qdev_get_gpio_in(DEVICE(s->c908_plic), K230_WDT0_IRQ));
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[1]), 0, memmap[K230_DEV_WDT1].base);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[1]), 0,
+ qdev_get_gpio_in(DEVICE(s->c908_plic), K230_WDT1_IRQ));
+
/* unimplemented devices */
create_unimplemented_device("kpu.l2-cache",
memmap[K230_DEV_KPU_L2_CACHE].base,
diff --git a/hw/watchdog/Kconfig b/hw/watchdog/Kconfig
index 861fd00334..55f77c5c84 100644
--- a/hw/watchdog/Kconfig
+++ b/hw/watchdog/Kconfig
@@ -18,6 +18,10 @@ config WDT_DIAG288
config WDT_IMX2
bool
+config K230_WDT
+ bool
+ select PTIMER
+
config WDT_SBSA
bool
diff --git a/hw/watchdog/k230_wdt.c b/hw/watchdog/k230_wdt.c
new file mode 100644
index 0000000000..f385319836
--- /dev/null
+++ b/hw/watchdog/k230_wdt.c
@@ -0,0 +1,307 @@
+/*
+ * * K230 Watchdog Compatible with kendryte K230 SDK
+ *
+ * Copyright (c) 2025 Mig Yang <temashking@foxmail.com>
+ * Copyright (c) 2025 Chao Liu <chao.liu@zevorn.cn>
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Provides a board compatible with the kendryte K230 SDK
+ *
+ * Documentation: K230_Technical_Reference_Manual_V0.3.1_20241118.pdf
+ *
+ * For more information, see <https://www.kendryte.com/en/proDetail/230>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "qemu/osdep.h"
+#include "qemu/bitops.h"
+#include "qemu/module.h"
+#include "system/watchdog.h"
+#include "migration/vmstate.h"
+#include "hw/qdev-properties.h"
+
+#include "hw/watchdog/k230_wdt.h"
+#include "trace.h"
+
+static void k230_wdt_timeout(void *opaque)
+{
+ K230WdtState *s = K230_WDT(opaque);
+
+ trace_k230_wdt_timeout();
+
+ /* Set interrupt status if in interrupt mode */
+ if (s->cr & K230_WDT_CR_RMOD) {
+ s->stat |= K230_WDT_STAT_INT;
+ s->interrupt_pending = true;
+ qemu_set_irq(s->irq, 1);
+ trace_k230_wdt_interrupt();
+ } else {
+ /* Direct reset mode */
+ trace_k230_wdt_reset();
+ watchdog_perform_action();
+ }
+
+ /* Restart counter */
+ s->current_count = s->timeout_value;
+ ptimer_set_count(s->timer, s->current_count);
+ ptimer_run(s->timer, 1);
+}
+
+static void k230_wdt_reset(DeviceState *dev)
+{
+ K230WdtState *s = K230_WDT(dev);
+
+ trace_k230_wdt_reset_device();
+
+ ptimer_transaction_begin(s->timer);
+ ptimer_stop(s->timer);
+ ptimer_transaction_commit(s->timer);
+
+ /* Reset registers to default values */
+ s->cr = 0;
+ s->torr = 0;
+ s->ccvr = 0xFFFFFFFF;
+ s->stat = 0;
+ s->prot_level = 0x2;
+
+ s->interrupt_pending = false;
+ s->enabled = false;
+ s->timeout_value = 0;
+ s->current_count = 0xFFFFFFFF;
+}
+
+static uint64_t k230_wdt_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ K230WdtState *s = K230_WDT(opaque);
+ uint32_t value = 0;
+
+ switch (addr) {
+ case K230_WDT_CR:
+ value = s->cr;
+ break;
+ case K230_WDT_TORR:
+ value = s->torr;
+ break;
+ case K230_WDT_CCVR:
+ if (s->enabled) {
+ value = ptimer_get_count(s->timer);
+ } else {
+ value = s->current_count;
+ }
+ break;
+ case K230_WDT_STAT:
+ value = s->stat;
+ break;
+ case K230_WDT_PROT_LEVEL:
+ value = s->prot_level;
+ break;
+ case K230_WDT_COMP_PARAM_5:
+ value = 0; /* Upper limit of Timeout Period parameters */
+ break;
+ case K230_WDT_COMP_PARAM_4:
+ value = 0; /* Upper limit of Initial Timeout Period parameters */
+ break;
+ case K230_WDT_COMP_PARAM_3:
+ value = 0; /* Derived from WDT_TOP_RST parameter */
+ break;
+ case K230_WDT_COMP_PARAM_2:
+ value = 0xFFFFFFFF; /* Derived from WDT_RST_CNT parameter */
+ break;
+ case K230_WDT_COMP_PARAM_1:
+ /* Component parameters */
+ value = (32 << K230_WDT_CNT_WIDTH_SHIFT) | /* 32-bit counter */
+ (0 << K230_WDT_DFLT_TOP_INIT_SHIFT) |
+ (0 << K230_WDT_DFLT_TOP_SHIFT) |
+ (K230_WDT_RPL_16_CYCLES << K230_WDT_DFLT_RPL_SHIFT) |
+ (2 << K230_WDT_APB_DATA_WIDTH_SHIFT) | /* 32-bit APB */
+ K230_WDT_USE_FIX_TOP; /* Use fixed timeout values */
+ break;
+ case K230_WDT_COMP_VERSION:
+ value = K230_WDT_COMP_VERSION_VAL;
+ break;
+ case K230_WDT_COMP_TYPE:
+ value = K230_WDT_COMP_TYPE_VAL;
+ break;
+ default:
+ /* Other registers return 0 */
+ break;
+ }
+
+ trace_k230_wdt_read(addr, value);
+ return value;
+}
+
+static void k230_wdt_update_timer(K230WdtState *s)
+{
+ ptimer_transaction_begin(s->timer);
+
+ if (s->enabled && s->timeout_value > 0) {
+ ptimer_set_count(s->timer, s->current_count);
+ ptimer_run(s->timer, 1);
+ } else {
+ ptimer_stop(s->timer);
+ }
+
+ ptimer_transaction_commit(s->timer);
+}
+
+static uint32_t k230_wdt_calculate_timeout(uint32_t top_value)
+{
+ /* Calculate timeout based on TOP value */
+ /* For fixed timeout mode: 2^(16 + top_value) */
+ if (top_value <= 15) {
+ return 1 << (16 + top_value);
+ }
+ return 1 << 31; /* Maximum value for 32-bit counter */
+}
+
+static void k230_wdt_write(void *opaque, hwaddr addr,
+ uint64_t value, unsigned int size)
+{
+ K230WdtState *s = K230_WDT(opaque);
+
+ trace_k230_wdt_write(addr, value);
+
+ switch (addr) {
+ case K230_WDT_CR:
+ s->cr = value & (K230_WDT_CR_RPL_MASK << K230_WDT_CR_RPL_SHIFT |
+ K230_WDT_CR_RMOD | K230_WDT_CR_WDT_EN);
+
+ /* Update enabled state */
+ s->enabled = (s->cr & K230_WDT_CR_WDT_EN) != 0;
+
+ /* Update timer */
+ k230_wdt_update_timer(s);
+ break;
+
+ case K230_WDT_TORR:
+ s->torr = value & K230_WDT_TORR_TOP_MASK;
+
+ /* Calculate new timeout value */
+ s->timeout_value = k230_wdt_calculate_timeout(s->torr);
+ s->current_count = s->timeout_value;
+
+ /* Update timer if enabled */
+ if (s->enabled) {
+ k230_wdt_update_timer(s);
+ }
+ break;
+
+ case K230_WDT_CRR:
+ /* Restart counter with magic value 0x76 */
+ if ((value & 0xFF) == K230_WDT_CRR_RESTART) {
+ trace_k230_wdt_restart();
+ s->current_count = s->timeout_value;
+
+ /* Clear interrupt if pending */
+ if (s->interrupt_pending) {
+ s->stat &= ~K230_WDT_STAT_INT;
+ s->interrupt_pending = false;
+ qemu_set_irq(s->irq, 0);
+ }
+
+ /* Update timer */
+ k230_wdt_update_timer(s);
+ }
+ break;
+
+ case K230_WDT_EOI:
+ /* Clear interrupt */
+ s->stat &= ~K230_WDT_STAT_INT;
+ s->interrupt_pending = false;
+ qemu_set_irq(s->irq, 0);
+ break;
+
+ case K230_WDT_PROT_LEVEL:
+ s->prot_level = value & 0x7;
+ break;
+
+ default:
+ /* Read-only registers, ignore writes */
+ break;
+ }
+}
+
+static const MemoryRegionOps k230_wdt_ops = {
+ .read = k230_wdt_read,
+ .write = k230_wdt_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+static const VMStateDescription vmstate_k230_wdt = {
+ .name = "k230.wdt",
+ .fields = (const VMStateField[]) {
+ VMSTATE_PTIMER(timer, K230WdtState),
+ VMSTATE_UINT32(cr, K230WdtState),
+ VMSTATE_UINT32(torr, K230WdtState),
+ VMSTATE_UINT32(ccvr, K230WdtState),
+ VMSTATE_UINT32(stat, K230WdtState),
+ VMSTATE_UINT32(prot_level, K230WdtState),
+ VMSTATE_BOOL(interrupt_pending, K230WdtState),
+ VMSTATE_BOOL(enabled, K230WdtState),
+ VMSTATE_UINT32(timeout_value, K230WdtState),
+ VMSTATE_UINT32(current_count, K230WdtState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void k230_wdt_realize(DeviceState *dev, Error **errp)
+{
+ K230WdtState *s = K230_WDT(dev);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+ memory_region_init_io(&s->mmio, OBJECT(dev),
+ &k230_wdt_ops, s,
+ TYPE_K230_WDT,
+ K230_WDT_MMIO_SIZE);
+ sysbus_init_mmio(sbd, &s->mmio);
+ sysbus_init_irq(sbd, &s->irq);
+
+ s->timer = ptimer_init(k230_wdt_timeout, s,
+ PTIMER_POLICY_NO_IMMEDIATE_TRIGGER |
+ PTIMER_POLICY_NO_IMMEDIATE_RELOAD |
+ PTIMER_POLICY_NO_COUNTER_ROUND_DOWN);
+
+ ptimer_transaction_begin(s->timer);
+ ptimer_set_freq(s->timer, K230_WDT_DEFAULT_FREQ);
+ ptimer_transaction_commit(s->timer);
+}
+
+static void k230_wdt_class_init(ObjectClass *klass, const void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = k230_wdt_realize;
+ device_class_set_legacy_reset(dc, k230_wdt_reset);
+ dc->vmsd = &vmstate_k230_wdt;
+ dc->desc = "K230 watchdog timer";
+ set_bit(DEVICE_CATEGORY_WATCHDOG, dc->categories);
+}
+
+static const TypeInfo k230_wdt_info = {
+ .name = TYPE_K230_WDT,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(K230WdtState),
+ .class_init = k230_wdt_class_init,
+};
+
+static void k230_wdt_register_type(void)
+{
+ type_register_static(&k230_wdt_info);
+}
+type_init(k230_wdt_register_type)
diff --git a/hw/watchdog/meson.build b/hw/watchdog/meson.build
index 15370565bd..5edae65a36 100644
--- a/hw/watchdog/meson.build
+++ b/hw/watchdog/meson.build
@@ -6,5 +6,6 @@ system_ss.add(when: 'CONFIG_WDT_IB700', if_true: files('wdt_ib700.c'))
system_ss.add(when: 'CONFIG_WDT_DIAG288', if_true: files('wdt_diag288.c'))
system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('wdt_aspeed.c'))
system_ss.add(when: 'CONFIG_WDT_IMX2', if_true: files('wdt_imx2.c'))
+system_ss.add(when: 'CONFIG_K230_WDT', if_true: files('k230_wdt.c'))
system_ss.add(when: 'CONFIG_WDT_SBSA', if_true: files('sbsa_gwdt.c'))
specific_ss.add(when: 'CONFIG_PSERIES', if_true: files('spapr_watchdog.c'))
diff --git a/hw/watchdog/trace-events b/hw/watchdog/trace-events
index ad3be1e9bd..d85b3ca769 100644
--- a/hw/watchdog/trace-events
+++ b/hw/watchdog/trace-events
@@ -33,3 +33,12 @@ spapr_watchdog_expired(uint64_t num, unsigned action) "num=%" PRIu64 " action=%u
# watchdog.c
watchdog_perform_action(unsigned int action) "action=%u"
watchdog_set_action(unsigned int action) "action=%u"
+
+# k230_wdt.c
+k230_wdt_read(uint64_t addr, uint32_t data) "K230 WDT read: [0x%" PRIx64 "] -> 0x%" PRIx32
+k230_wdt_write(uint64_t addr, uint64_t data) "K230 WDT write: [0x%" PRIx64 "] <- 0x%" PRIx64
+k230_wdt_timeout(void) "K230 WDT timeout"
+k230_wdt_interrupt(void) "K230 WDT interrupt"
+k230_wdt_reset(void) "K230 WDT system reset"
+k230_wdt_restart(void) "K230 WDT restart"
+k230_wdt_reset_device(void) "K230 WDT device reset"
diff --git a/include/hw/riscv/k230.h b/include/hw/riscv/k230.h
index 3158381e8f..f2eedd5f70 100644
--- a/include/hw/riscv/k230.h
+++ b/include/hw/riscv/k230.h
@@ -27,6 +27,7 @@
#include "hw/boards.h"
#include "hw/riscv/riscv_hart.h"
+#include "hw/watchdog/k230_wdt.h"
#define C908_CPU_HARTID (0)
@@ -41,6 +42,7 @@ typedef struct K230SoCState {
/*< public >*/
RISCVHartArrayState c908_cpu; /* Small core */
+ K230WdtState wdt[2];
MemoryRegion sram;
MemoryRegion bootrom;
@@ -131,6 +133,8 @@ enum {
K230_UART2_IRQ = 18,
K230_UART3_IRQ = 19,
K230_UART4_IRQ = 20,
+ K230_WDT0_IRQ = 32,
+ K230_WDT1_IRQ = 33,
};
/*
diff --git a/include/hw/watchdog/k230_wdt.h b/include/hw/watchdog/k230_wdt.h
new file mode 100644
index 0000000000..9371602387
--- /dev/null
+++ b/include/hw/watchdog/k230_wdt.h
@@ -0,0 +1,130 @@
+/*
+ * K230 Watchdog Timer
+ *
+ * Based on K230 technical documentation
+ *
+ * Copyright (c) 2025 Mig Yang <temashking@foxmail.com>
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef K230_WDT_H
+#define K230_WDT_H
+
+#include "qemu/bitops.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+#include "hw/ptimer.h"
+#include "qom/object.h"
+
+#define TYPE_K230_WDT "riscv.k230.wdt"
+OBJECT_DECLARE_SIMPLE_TYPE(K230WdtState, K230_WDT)
+
+#define K230_WDT_DEFAULT_FREQ (32768)
+
+/* K230 Watchdog Register Map */
+enum K230WdtRegisters {
+ K230_WDT_CR = 0x00, /* Control Register */
+ K230_WDT_TORR = 0x04, /* Timeout Range Register */
+ K230_WDT_CCVR = 0x08, /* Current Counter Value Register */
+ K230_WDT_CRR = 0x0c, /* Counter Restart Register */
+ K230_WDT_STAT = 0x10, /* Interrupt Status Register */
+ K230_WDT_EOI = 0x14, /* Interrupt Clear Register */
+ K230_WDT_PROT_LEVEL = 0x1c, /* Protection Level Register */
+ K230_WDT_COMP_PARAM_5 = 0xe4, /* Component Parameters Register 5 */
+ K230_WDT_COMP_PARAM_4 = 0xe8, /* Component Parameters Register 4 */
+ K230_WDT_COMP_PARAM_3 = 0xec, /* Component Parameters Register 3 */
+ K230_WDT_COMP_PARAM_2 = 0xf0, /* Component Parameters Register 2 */
+ K230_WDT_COMP_PARAM_1 = 0xf4, /* Component Parameters Register 1 */
+ K230_WDT_COMP_VERSION = 0xf8, /* Component Version Register */
+ K230_WDT_COMP_TYPE = 0xfc, /* Component Type Register */
+};
+
+#define K230_WDT_MMIO_SIZE 0x100
+
+/* Control Register (WDT_CR) definitions */
+#define K230_WDT_CR_RPL_MASK 0x7 /* Reset Pulse Length */
+#define K230_WDT_CR_RPL_SHIFT 2
+#define K230_WDT_CR_RMOD BIT(1) /* Response Mode */
+#define K230_WDT_CR_WDT_EN BIT(0) /* Watchdog Enable */
+
+/* Reset Pulse Length values */
+#define K230_WDT_RPL_2_CYCLES 0x0
+#define K230_WDT_RPL_4_CYCLES 0x1
+#define K230_WDT_RPL_8_CYCLES 0x2
+#define K230_WDT_RPL_16_CYCLES 0x3
+#define K230_WDT_RPL_32_CYCLES 0x4
+#define K230_WDT_RPL_64_CYCLES 0x5
+#define K230_WDT_RPL_128_CYCLES 0x6
+#define K230_WDT_RPL_256_CYCLES 0x7
+
+/* Timeout Range Register (WDT_TORR) definitions */
+#define K230_WDT_TORR_TOP_MASK 0xf /* Timeout Period */
+
+/* Interrupt Status Register (WDT_STAT) definitions */
+#define K230_WDT_STAT_INT BIT(0) /* Interrupt Status */
+
+/* Counter Restart Register (WDT_CRR) magic value */
+#define K230_WDT_CRR_RESTART 0x76 /* Restart command */
+
+/* Component Parameters Register 1 (WDT_COMP_PARAM_1) definitions */
+#define K230_WDT_CNT_WIDTH_MASK 0x1f000000 /* Counter Width */
+#define K230_WDT_CNT_WIDTH_SHIFT 24
+#define K230_WDT_DFLT_TOP_INIT_MASK 0xf00000 /* Default Initial Timeout */
+#define K230_WDT_DFLT_TOP_INIT_SHIFT 20
+#define K230_WDT_DFLT_TOP_MASK 0xf0000 /* Default Timeout */
+#define K230_WDT_DFLT_TOP_SHIFT 16
+#define K230_WDT_DFLT_RPL_MASK 0x7 /* Default Reset Pulse Length */
+#define K230_WDT_DFLT_RPL_SHIFT 10
+#define K230_WDT_APB_DATA_WIDTH_MASK 0x3 /* APB Data Width */
+#define K230_WDT_APB_DATA_WIDTH_SHIFT 8
+#define K230_WDT_USE_FIX_TOP BIT(6) /* Use Fixed Timeout Values */
+#define K230_WDT_HC_TOP BIT(5) /* Hard-coded Timeout */
+#define K230_WDT_HC_RPL BIT(4) /* Hard-coded Reset Pulse Length */
+#define K230_WDT_HC_RMOD BIT(3) /* Hard-coded Response Mode */
+#define K230_WDT_DUAL_TOP BIT(2) /* Dual Timeout Period */
+#define K230_WDT_DFLT_RMOD BIT(1) /* Default Response Mode */
+#define K230_WDT_ALWAYS_EN BIT(0) /* Always Enabled */
+
+/* Component Type Register value */
+#define K230_WDT_COMP_TYPE_VAL 0x44570120
+
+/* Component Version Register value */
+#define K230_WDT_COMP_VERSION_VAL 0x3131302a /* "110*" */
+
+struct K230WdtState {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ MemoryRegion mmio;
+ qemu_irq irq;
+
+ struct ptimer_state *timer;
+
+ /* Register state */
+ uint32_t cr; /* Control Register */
+ uint32_t torr; /* Timeout Range Register */
+ uint32_t ccvr; /* Current Counter Value Register */
+ uint32_t stat; /* Interrupt Status Register */
+ uint32_t prot_level; /* Protection Level Register */
+
+ /* Internal state */
+ bool interrupt_pending;
+ bool enabled;
+ uint32_t timeout_value;
+ uint32_t current_count;
+};
+
+#endif /* K230_WDT_H */
--
2.51.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [RESEND PATCH v3 4/5] tests/qtest: add test for K230 watchdog
2025-12-15 17:01 [RESEND PATCH v3 0/5] Add K230 board and thead-c908 CPU support Chao Liu
` (2 preceding siblings ...)
2025-12-15 17:01 ` [RESEND PATCH v3 3/5] hw/watchdog: add k230 watchdog " Chao Liu
@ 2025-12-15 17:01 ` Chao Liu
2025-12-15 17:01 ` [RESEND PATCH v3 5/5] docs/system/riscv: add documentation for k230 machine Chao Liu
4 siblings, 0 replies; 6+ messages in thread
From: Chao Liu @ 2025-12-15 17:01 UTC (permalink / raw)
To: pbonzini, dbarboza, palmer, alistair.francis, liwei1518,
zhiwei_liu
Cc: qemu-riscv, qemu-devel, hust-os-kernel-patches, 1440332527,
3160104094, temashking, me, Chao Liu
From: Chao Liu <chao.liu@zevorn.cn>
Testing the Basic Functions of K230 WDT:
1. Reset Function
2. Timeout Check
3. Interrupt Function
Signed-off-by: Mig Yang <temashking@foxmail.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
MAINTAINERS | 1 +
tests/qtest/k230-wdt-test.c | 199 ++++++++++++++++++++++++++++++++++++
tests/qtest/meson.build | 3 +-
3 files changed, 202 insertions(+), 1 deletion(-)
create mode 100644 tests/qtest/k230-wdt-test.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 7973785525..1d2f2c468c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1744,6 +1744,7 @@ F: hw/riscv/k230.c
F: hw/watchdog/k230_wdt.c
F: include/hw/riscv/k230.h
F: include/hw/watchdog/k230_wdt.h
+F: tests/qtest/k230-wdt-test.c
RX Machines
-----------
diff --git a/tests/qtest/k230-wdt-test.c b/tests/qtest/k230-wdt-test.c
new file mode 100644
index 0000000000..2550cebd10
--- /dev/null
+++ b/tests/qtest/k230-wdt-test.c
@@ -0,0 +1,199 @@
+/*
+ * QTest testcase for K230 Watchdog
+ *
+ * Copyright (c) 2025 Mig Yang <temashking@foxmail.com>
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Provides a board compatible with the kendryte K230 SDK
+ *
+ * Documentation: K230_Technical_Reference_Manual_V0.3.1_20241118.pdf
+ *
+ * For more information, see <https://www.kendryte.com/en/proDetail/230>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/timer.h"
+#include "qemu/bitops.h"
+#include "libqtest.h"
+#include "hw/watchdog/k230_wdt.h"
+
+/* K230 WDT0 base address */
+#define K230_WDT0_BASE 0x91106000
+#define K230_WDT1_BASE 0x91106800
+
+/* Test WDT0 by default */
+#define WDT_BASE K230_WDT0_BASE
+
+static void test_register_read_write(void)
+{
+ QTestState *qts = qtest_init("-machine k230");
+
+ /* Test Control Register (CR) read/write */
+ qtest_writel(qts, WDT_BASE + K230_WDT_CR, 0xFFFFFFFF);
+ g_assert_cmphex(qtest_readl(qts, WDT_BASE + K230_WDT_CR), ==,
+ (K230_WDT_CR_RPL_MASK << K230_WDT_CR_RPL_SHIFT) |
+ K230_WDT_CR_RMOD | K230_WDT_CR_WDT_EN);
+
+ /* Test Timeout Range Register (TORR) read/write */
+ qtest_writel(qts, WDT_BASE + K230_WDT_TORR, 0xFFFFFFFF);
+ g_assert_cmphex(qtest_readl(qts, WDT_BASE + K230_WDT_TORR), ==,
+ K230_WDT_TORR_TOP_MASK);
+
+ /* Test Protection Level Register read/write */
+ qtest_writel(qts, WDT_BASE + K230_WDT_PROT_LEVEL, 0xFFFFFFFF);
+ g_assert_cmphex(qtest_readl(qts, WDT_BASE + K230_WDT_PROT_LEVEL), ==, 0x7);
+
+ qtest_quit(qts);
+}
+
+static void test_counter_restart(void)
+{
+ QTestState *qts = qtest_init("-machine k230");
+
+ /* Enable watchdog and set timeout */
+ qtest_writel(qts, WDT_BASE + K230_WDT_CR, K230_WDT_CR_WDT_EN);
+ qtest_writel(qts, WDT_BASE + K230_WDT_TORR, 0x5); /* TOP = 5 */
+
+ /* Read current counter value */
+ uint32_t initial_count = qtest_readl(qts, WDT_BASE + K230_WDT_CCVR);
+ g_assert_cmpuint(initial_count, >, 0);
+
+ /* Restart counter with magic value */
+ qtest_writel(qts, WDT_BASE + K230_WDT_CRR, K230_WDT_CRR_RESTART);
+
+ /* Wait for time */
+ qtest_clock_step(qts, NANOSECONDS_PER_SECOND * 2);
+
+ /* Counter should be reset to timeout value */
+ uint32_t new_count = qtest_readl(qts, WDT_BASE + K230_WDT_CCVR);
+ g_assert_cmpuint(new_count, >, 0);
+ g_assert_cmpuint(new_count, !=, initial_count);
+
+ qtest_quit(qts);
+}
+
+static void test_interrupt_mode(void)
+{
+ QTestState *qts = qtest_init("-machine k230 --trace k230_*,file=k230.log");
+
+ /* Set interrupt mode and enable watchdog */
+ qtest_writel(qts, WDT_BASE + K230_WDT_CR,
+ K230_WDT_CR_RMOD | K230_WDT_CR_WDT_EN);
+ qtest_writel(qts, WDT_BASE + K230_WDT_TORR, 0x1); /* Short timeout */
+
+ /* Wait for timeout to trigger interrupt */
+ qtest_clock_step(qts, NANOSECONDS_PER_SECOND * 10);
+
+ /* Check interrupt status */
+ uint32_t stat = qtest_readl(qts, WDT_BASE + K230_WDT_STAT);
+ g_assert_cmphex(stat & K230_WDT_STAT_INT, ==, K230_WDT_STAT_INT);
+
+ /* Clear interrupt */
+ qtest_writel(qts, WDT_BASE + K230_WDT_EOI, 0x1);
+ stat = qtest_readl(qts, WDT_BASE + K230_WDT_STAT);
+ g_assert_cmphex(stat & K230_WDT_STAT_INT, ==, 0);
+
+ qtest_quit(qts);
+}
+
+static void test_reset_mode(void)
+{
+ QTestState *qts = qtest_init("-machine k230 -no-reboot");
+
+ /* Set reset mode and enable watchdog */
+ qtest_writel(qts, WDT_BASE + K230_WDT_CR, K230_WDT_CR_WDT_EN);
+ qtest_writel(qts, WDT_BASE + K230_WDT_TORR, 0x1); /* Short timeout */
+
+ /* Wait for timeout to trigger reset */
+ qtest_clock_step(qts, NANOSECONDS_PER_SECOND * 2);
+
+ /* In reset mode, the system should reset */
+ /* This test verifies that reset mode is properly configured */
+
+ qtest_quit(qts);
+}
+
+static void test_timeout_calculation(void)
+{
+ QTestState *qts = qtest_init("-machine k230");
+
+ /* Test different timeout values */
+ for (uint32_t top = 0; top <= 15; top++) {
+ qtest_writel(qts, WDT_BASE + K230_WDT_TORR, top);
+ qtest_writel(qts, WDT_BASE + K230_WDT_CR, K230_WDT_CR_WDT_EN);
+
+ /* Read current counter value */
+ uint32_t count = qtest_readl(qts, WDT_BASE + K230_WDT_CCVR);
+ g_assert_cmpuint(count, >, 0);
+
+ /* Disable watchdog for next iteration */
+ qtest_writel(qts, WDT_BASE + K230_WDT_CR, 0);
+ }
+
+ qtest_quit(qts);
+}
+
+static void test_wdt1_registers(void)
+{
+ QTestState *qts = qtest_init("-machine k230");
+
+ /* Test WDT1 registers (second watchdog) */
+ qtest_writel(qts, K230_WDT1_BASE + K230_WDT_CR, 0xFFFFFFFF);
+ g_assert_cmphex(qtest_readl(qts, K230_WDT1_BASE + K230_WDT_CR), ==,
+ (K230_WDT_CR_RPL_MASK << K230_WDT_CR_RPL_SHIFT) |
+ K230_WDT_CR_RMOD | K230_WDT_CR_WDT_EN);
+
+ qtest_writel(qts, K230_WDT1_BASE + K230_WDT_TORR, 0xFFFFFFFF);
+ g_assert_cmphex(qtest_readl(qts, K230_WDT1_BASE + K230_WDT_TORR), ==,
+ K230_WDT_TORR_TOP_MASK);
+
+ qtest_quit(qts);
+}
+
+static void test_enable_disable(void)
+{
+ QTestState *qts = qtest_init("-machine k230");
+
+ /* Initially disabled */
+ uint32_t cr = qtest_readl(qts, WDT_BASE + K230_WDT_CR);
+ g_assert_cmphex(cr & K230_WDT_CR_WDT_EN, ==, 0);
+
+ /* Enable watchdog */
+ qtest_writel(qts, WDT_BASE + K230_WDT_CR, K230_WDT_CR_WDT_EN);
+ cr = qtest_readl(qts, WDT_BASE + K230_WDT_CR);
+ g_assert_cmphex(cr & K230_WDT_CR_WDT_EN, ==, K230_WDT_CR_WDT_EN);
+
+ /* Disable watchdog */
+ qtest_writel(qts, WDT_BASE + K230_WDT_CR, 0);
+ cr = qtest_readl(qts, WDT_BASE + K230_WDT_CR);
+ g_assert_cmphex(cr & K230_WDT_CR_WDT_EN, ==, 0);
+
+ qtest_quit(qts);
+}
+
+int main(int argc, char *argv[])
+{
+ g_test_init(&argc, &argv, NULL);
+
+ qtest_add_func("/k230-wdt/register_read_write", test_register_read_write);
+ qtest_add_func("/k230-wdt/counter_restart", test_counter_restart);
+ qtest_add_func("/k230-wdt/interrupt_mode", test_interrupt_mode);
+ qtest_add_func("/k230-wdt/reset_mode", test_reset_mode);
+ qtest_add_func("/k230-wdt/timeout_calculation", test_timeout_calculation);
+ qtest_add_func("/k230-wdt/wdt1_registers", test_wdt1_registers);
+ qtest_add_func("/k230-wdt/enable_disable", test_enable_disable);
+
+ return g_test_run();
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 669d07c06b..0d9339e938 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -282,7 +282,8 @@ qtests_riscv32 = \
(config_all_devices.has_key('CONFIG_SIFIVE_E_AON') ? ['sifive-e-aon-watchdog-test'] : [])
qtests_riscv64 = ['riscv-csr-test'] + \
- (unpack_edk2_blobs ? ['bios-tables-test'] : [])
+ (unpack_edk2_blobs ? ['bios-tables-test'] : []) + \
+ (config_all_devices.has_key('CONFIG_K230') ? ['k230-wdt-test'] : [])
qos_test_ss = ss.source_set()
qos_test_ss.add(
--
2.51.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [RESEND PATCH v3 5/5] docs/system/riscv: add documentation for k230 machine
2025-12-15 17:01 [RESEND PATCH v3 0/5] Add K230 board and thead-c908 CPU support Chao Liu
` (3 preceding siblings ...)
2025-12-15 17:01 ` [RESEND PATCH v3 4/5] tests/qtest: add test for K230 watchdog Chao Liu
@ 2025-12-15 17:01 ` Chao Liu
4 siblings, 0 replies; 6+ messages in thread
From: Chao Liu @ 2025-12-15 17:01 UTC (permalink / raw)
To: pbonzini, dbarboza, palmer, alistair.francis, liwei1518,
zhiwei_liu
Cc: qemu-riscv, qemu-devel, hust-os-kernel-patches, 1440332527,
3160104094, temashking, me, Chao Liu, Chao Liu
From: Chao Liu <chao.liu@zevorn.cn>
Add documentation for k230 virt reference platform.
Signed-off-by: Chao Liu <chao.liu.zevorn@gmail.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
MAINTAINERS | 1 +
docs/system/riscv/k230.rst | 48 ++++++++++++++++++++++++++++++++++++
docs/system/target-riscv.rst | 1 +
3 files changed, 50 insertions(+)
create mode 100644 docs/system/riscv/k230.rst
diff --git a/MAINTAINERS b/MAINTAINERS
index 1d2f2c468c..e84703c1bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1740,6 +1740,7 @@ F: include/hw/riscv/xiangshan_kmh.h
K230 Machines
M: Chao Liu <chao.liu.zevorn@gmail.com>
S: Maintained
+F: docs/system/riscv/k230.rst
F: hw/riscv/k230.c
F: hw/watchdog/k230_wdt.c
F: include/hw/riscv/k230.h
diff --git a/docs/system/riscv/k230.rst b/docs/system/riscv/k230.rst
new file mode 100644
index 0000000000..3e6ca295df
--- /dev/null
+++ b/docs/system/riscv/k230.rst
@@ -0,0 +1,48 @@
+Kendryte K230 virt reference platform (``k230``)
+==========================================================================
+The ``k230`` machine is compatible with with Kendryte K230 SDK.
+
+The K230 is a chip from the AIoT SoC series made by Kendryte ® — a part of
+Canaan Inc. It uses a brand-new multi-heterogeneous unit accelerated computing
+structure.
+
+This chip has 2 RISC-V computing cores and a new-generation KPU (Knowledge
+Process Unit) smart computing unit.
+
+It has multi-precision AI computing ability, works with many common AI computing
+frameworks, and for some typical networks, its usage rate is over 70%. Besides,
+the K230 chip supports many peripheral connections and has several special
+hardware acceleration units (like 2D and 2.5D accelerators). It can speed up
+different tasks (such as image processing, video processing, audio processing
+and AI computing). It also has many good features: low delay, high performance,
+low power use and fast start-up.
+
+For more information, see <https://www.kendryte.com/en/proDetail/230>
+
+Supported devices
+-----------------
+The ``k230`` machine supports the following devices:
+
+* 1 c908 cores
+* Core Local Interruptor (CLINT)
+* Incoming MSI Controller (IMSIC)
+* 2 K230 Watchdog Timer
+* 4 UART
+
+Boot options
+------------
+The ``k230`` machine can start using the standard ``-bios``
+functionality for loading the boot image. You need to compile and link
+the firmware, kernel, and Device Tree (FDT) into a single binary file with
+K230 SDK(k230_canmv_defconfig), such as ``uboot``.
+
+Running
+-------
+Below is an example command line for running the ``k230``
+machine:
+
+.. code-block:: bash
+
+ $ qemu-system-riscv64 -machine k230 \
+ -bios k230_sdk/output/k230_canmv_defconfig/little/uboot/u-boot \
+ -nographic
diff --git a/docs/system/target-riscv.rst b/docs/system/target-riscv.rst
index 89b2cb732c..2103ff6173 100644
--- a/docs/system/target-riscv.rst
+++ b/docs/system/target-riscv.rst
@@ -66,6 +66,7 @@ undocumented; you can get a complete list by running
.. toctree::
:maxdepth: 1
+ riscv/k230
riscv/microblaze-v-generic
riscv/microchip-icicle-kit
riscv/shakti-c
--
2.51.0
^ permalink raw reply related [flat|nested] 6+ messages in thread