From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: Bihong Yu <yubihong@huawei.com>,
qemu-devel@nongnu.org, qemu-trivial@nongnu.org
Cc: alex.chen@huawei.com, zhengchuan@huawei.com,
wanghao232@huawei.com, dgilbert@redhat.com
Subject: Re: [PATCH v3] migration: using trace_ to replace DPRINTF
Date: Tue, 20 Oct 2020 10:11:46 +0200 [thread overview]
Message-ID: <0dc00d17-877b-001d-aa7c-9240d4cdb629@redhat.com> (raw)
In-Reply-To: <1603179176-5360-1-git-send-email-yubihong@huawei.com>
On 10/20/20 9:32 AM, Bihong Yu wrote:
> Signed-off-by: Bihong Yu <yubihong@huawei.com>
> ---
> migration/block.c | 36 ++++++++++++++++++------------------
> migration/page_cache.c | 13 +++----------
> migration/trace-events | 13 +++++++++++++
> 3 files changed, 34 insertions(+), 28 deletions(-)
>
> diff --git a/migration/block.c b/migration/block.c
> index 273392b..a950977 100644
> --- a/migration/block.c
> +++ b/migration/block.c
> @@ -26,6 +26,7 @@
> #include "qemu-file.h"
> #include "migration/vmstate.h"
> #include "sysemu/block-backend.h"
> +#include "trace.h"
>
> #define BLK_MIG_BLOCK_SIZE (1 << 20)
> #define BDRV_SECTORS_PER_DIRTY_CHUNK (BLK_MIG_BLOCK_SIZE >> BDRV_SECTOR_BITS)
> @@ -434,10 +435,9 @@ static int init_blk_migration(QEMUFile *f)
> block_mig_state.total_sector_sum += sectors;
>
> if (bmds->shared_base) {
> - DPRINTF("Start migration for %s with shared base image\n",
> - bdrv_get_device_name(bs));
> + trace_migration_block_init_shared(bdrv_get_device_name(bs));
> } else {
> - DPRINTF("Start full migration for %s\n", bdrv_get_device_name(bs));
> + trace_migration_block_init_full(bdrv_get_device_name(bs));
> }
>
> QSIMPLEQ_INSERT_TAIL(&block_mig_state.bmds_list, bmds, entry);
> @@ -592,7 +592,7 @@ static int mig_save_device_dirty(QEMUFile *f, BlkMigDevState *bmds,
> return (bmds->cur_dirty >= bmds->total_sectors);
>
> error:
> - DPRINTF("Error reading sector %" PRId64 "\n", sector);
> + trace_migration_block_save_device_dirty(sector);
> g_free(blk->buf);
> g_free(blk);
> return ret;
> @@ -628,9 +628,9 @@ static int flush_blks(QEMUFile *f)
> BlkMigBlock *blk;
> int ret = 0;
>
> - DPRINTF("%s Enter submitted %d read_done %d transferred %d\n",
> - __func__, block_mig_state.submitted, block_mig_state.read_done,
> - block_mig_state.transferred);
> + trace_migration_block_flush_blks("Enter", block_mig_state.submitted,
> + block_mig_state.read_done,
> + block_mig_state.transferred);
>
> blk_mig_lock();
> while ((blk = QSIMPLEQ_FIRST(&block_mig_state.blk_list)) != NULL) {
> @@ -656,9 +656,9 @@ static int flush_blks(QEMUFile *f)
> }
> blk_mig_unlock();
>
> - DPRINTF("%s Exit submitted %d read_done %d transferred %d\n", __func__,
> - block_mig_state.submitted, block_mig_state.read_done,
> - block_mig_state.transferred);
> + trace_migration_block_flush_blks("Exit", block_mig_state.submitted,
> + block_mig_state.read_done,
> + block_mig_state.transferred);
> return ret;
> }
>
> @@ -727,8 +727,8 @@ static int block_save_setup(QEMUFile *f, void *opaque)
> {
> int ret;
>
> - DPRINTF("Enter save live setup submitted %d transferred %d\n",
> - block_mig_state.submitted, block_mig_state.transferred);
> + trace_migration_block_save("setup", block_mig_state.submitted,
> + block_mig_state.transferred);
>
> qemu_mutex_lock_iothread();
> ret = init_blk_migration(f);
> @@ -759,8 +759,8 @@ static int block_save_iterate(QEMUFile *f, void *opaque)
> int64_t last_ftell = qemu_ftell(f);
> int64_t delta_ftell;
>
> - DPRINTF("Enter save live iterate submitted %d transferred %d\n",
> - block_mig_state.submitted, block_mig_state.transferred);
> + trace_migration_block_save("iterate", block_mig_state.submitted,
> + block_mig_state.transferred);
>
> ret = flush_blks(f);
> if (ret) {
> @@ -825,8 +825,8 @@ static int block_save_complete(QEMUFile *f, void *opaque)
> {
> int ret;
>
> - DPRINTF("Enter save live complete submitted %d transferred %d\n",
> - block_mig_state.submitted, block_mig_state.transferred);
> + trace_migration_block_save("complete", block_mig_state.submitted,
> + block_mig_state.transferred);
>
> ret = flush_blks(f);
> if (ret) {
> @@ -851,7 +851,7 @@ static int block_save_complete(QEMUFile *f, void *opaque)
> /* report completion */
> qemu_put_be64(f, (100 << BDRV_SECTOR_BITS) | BLK_MIG_FLAG_PROGRESS);
>
> - DPRINTF("Block migration completed\n");
> + trace_migration_block_save_complete();
>
> qemu_put_be64(f, BLK_MIG_FLAG_EOS);
>
> @@ -884,7 +884,7 @@ static void block_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
> pending = max_size + BLK_MIG_BLOCK_SIZE;
> }
>
> - DPRINTF("Enter save live pending %" PRIu64 "\n", pending);
> + trace_migration_block_save_pending(pending);
> /* We don't do postcopy */
> *res_precopy_only += pending;
> }
> diff --git a/migration/page_cache.c b/migration/page_cache.c
> index 775582f..098b436 100644
> --- a/migration/page_cache.c
> +++ b/migration/page_cache.c
> @@ -18,14 +18,7 @@
> #include "qapi/error.h"
> #include "qemu/host-utils.h"
> #include "page_cache.h"
> -
> -#ifdef DEBUG_CACHE
> -#define DPRINTF(fmt, ...) \
> - do { fprintf(stdout, "cache: " fmt, ## __VA_ARGS__); } while (0)
> -#else
> -#define DPRINTF(fmt, ...) \
> - do { } while (0)
> -#endif
> +#include "trace.h"
>
> /* the page in cache will not be replaced in two cycles */
> #define CACHED_PAGE_LIFETIME 2
> @@ -75,7 +68,7 @@ PageCache *cache_init(int64_t new_size, size_t page_size, Error **errp)
> cache->num_items = 0;
> cache->max_num_items = num_pages;
>
> - DPRINTF("Setting cache buckets to %" PRId64 "\n", cache->max_num_items);
> + trace_migration_pagecache_init(cache->max_num_items);
>
> /* We prefer not to abort if there is no memory */
> cache->page_cache = g_try_malloc((cache->max_num_items) *
> @@ -169,7 +162,7 @@ int cache_insert(PageCache *cache, uint64_t addr, const uint8_t *pdata,
> if (!it->it_data) {
> it->it_data = g_try_malloc(cache->page_size);
> if (!it->it_data) {
> - DPRINTF("Error allocating page\n");
> + trace_migration_pagecache_insert();
> return -1;
> }
> cache->num_items++;
> diff --git a/migration/trace-events b/migration/trace-events
> index 338f38b..c775511 100644
> --- a/migration/trace-events
> +++ b/migration/trace-events
> @@ -325,3 +325,16 @@ get_ramblock_vfn_hash(const char *idstr, uint64_t vfn, uint32_t crc) "ramblock n
> calc_page_dirty_rate(const char *idstr, uint32_t new_crc, uint32_t old_crc) "ramblock name: %s, new crc: %" PRIu32 ", old crc: %" PRIu32
> skip_sample_ramblock(const char *idstr, uint64_t ramblock_size) "ramblock name: %s, ramblock size: %" PRIu64
> find_page_matched(const char *idstr) "ramblock %s addr or size changed"
> +
> +# block.c
> +migration_block_init_shared(const char *blk_device_name) "Start migration for %s with shared base image"
> +migration_block_init_full(const char *blk_device_name) "Start full migration for %s"
> +migration_block_save_device_dirty(int64_t sector) "Error reading sector %" PRId64
> +migration_block_flush_blks(const char *action, int submitted, int read_done, int transferred) "%s submitted %d read_done %d transferred %d"
Maybe "%s (submitted %d, read_done %d, transferred %d)"
> +migration_block_save(const char *mig_stage, int submitted, int transferred) "Enter save live %s submitted %d transferred %d"
> +migration_block_save_complete(void) "Block migration completed"
> +migration_block_save_pending(uint64_t pending) "Enter save live pending %" PRIu64
Maybe "save live (blocks pending: %" PRIu64 ")"
> +
> +# page_cache.c
> +migration_pagecache_init(int64_t max_num_items) "Setting cache buckets to %" PRId64
Maybe "Setting cache to %" PRId64 " buckets"
> +migration_pagecache_insert(void) "Error allocating page"
>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
next prev parent reply other threads:[~2020-10-20 8:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-20 7:32 [PATCH v3] migration: using trace_ to replace DPRINTF Bihong Yu
2020-10-20 8:11 ` Philippe Mathieu-Daudé [this message]
2020-10-26 12:29 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0dc00d17-877b-001d-aa7c-9240d4cdb629@redhat.com \
--to=philmd@redhat.com \
--cc=alex.chen@huawei.com \
--cc=dgilbert@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
--cc=wanghao232@huawei.com \
--cc=yubihong@huawei.com \
--cc=zhengchuan@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).