From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: richard.henderson@linaro.org, qemu-devel@nongnu.org
Subject: Re: [PATCH v32 21/22] BootLinuxConsoleTest: Test the RX-Virt machine
Date: Mon, 9 Mar 2020 11:54:20 +0100 [thread overview]
Message-ID: <0ead8621-e590-d81c-c71a-9213108fa13f@redhat.com> (raw)
In-Reply-To: <87k13u9h0p.wl-ysato@users.sourceforge.jp>
On 3/9/20 7:30 AM, Yoshinori Sato wrote:
> On Mon, 09 Mar 2020 01:20:05 +0900,
> Philippe Mathieu-Daudé wrote:
>>
>> On 2/24/20 3:19 PM, Yoshinori Sato wrote:
>>> From: Philippe Mathieu-Daudé <philmd@redhat.com>
>>>
>>> Add two tests for the rx-virt machine, based on the recommended test
>>> setup from Yoshinori Sato:
>>> https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html
>>>
>>> - U-Boot prompt
>>> - Linux kernel with Sash shell
>>>
>>> These are very quick tests:
>>>
>>> $ avocado run -t arch:rx tests/acceptance/boot_linux_console.py
>>> JOB ID : 84a6ef01c0b87975ecbfcb31a920afd735753ace
>>> JOB LOG : /home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
>>> (1/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_uboot: PASS (0.11 s)
>>> (2/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_linux: PASS (0.45 s)
>>> RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
>>>
>>> Tests can also be run with:
>>>
>>> $ avocado --show=console run -t arch:rx tests/acceptance/boot_linux_console.py
>>> console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
>>> console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
>>> console: Built 1 zonelists, mobility grouping on. Total pages: 8128
>>> ...
>>> console: SuperH (H)SCI(F) driver initialized
>>> console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
>>> console: console [ttySC0] enabled
>>> console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci
>>>
>>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>> Based-on: 20190517045136.3509-1-richard.henderson@linaro.org
>>> "RX architecture support"
>>> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
>>> ---
>>> tests/acceptance/boot_linux_console.py | 46 ++++++++++++++++++++++++++
>>> 1 file changed, 46 insertions(+)
>>>
>>> diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
>>> index 34d37eba3b..367cf480a5 100644
>>> --- a/tests/acceptance/boot_linux_console.py
>>> +++ b/tests/acceptance/boot_linux_console.py
>>> @@ -686,3 +686,49 @@ class BootLinuxConsole(Test):
>>> tar_hash = '49e88d9933742f0164b60839886c9739cb7a0d34'
>>> self.vm.add_args('-cpu', 'dc233c')
>>> self.do_test_advcal_2018('02', tar_hash, 'santas-sleigh-ride.elf')
>>> +
>>> + def test_rx_uboot(self):
>>> + """
>>> + :avocado: tags=arch:rx
>>> + :avocado: tags=machine:rx-virt
>>> + :avocado: tags=endian:little
>>> + """
>>> + uboot_url = ('https://acc.dl.osdn.jp/users/23/23888/u-boot.bin.gz')
>>> + uboot_hash = '9b78dbd43b40b2526848c0b1ce9de02c24f4dcdb'
>>> + uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash)
>>> + uboot_path = archive.uncompress(uboot_path, self.workdir)
>>> +
>>> + self.vm.set_machine('rx-virt')
>>> + self.vm.set_console()
>>> + self.vm.add_args('-bios', uboot_path,
>>> + '-no-reboot')
>>> + self.vm.launch()
>>> + uboot_version = 'U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty'
>>> + self.wait_for_console_pattern(uboot_version)
>>> + gcc_version = 'rx-unknown-linux-gcc (GCC) 9.0.0 20181105 (experimental)'
>>> + # FIXME limit baudrate on chardev, else we type too fast
>>> + #self.exec_command_and_wait_for_pattern('version', gcc_version)
>>> +
>>> + def test_rx_linux(self):
>>> + """
>>> + :avocado: tags=arch:rx
>>> + :avocado: tags=machine:rx-virt
>>> + :avocado: tags=endian:little
>>> + """
>>> + dtb_url = ('https://acc.dl.osdn.jp/users/23/23887/rx-qemu.dtb')
>>
>> Sourceforge URL are not very stable, I'm now getting:
>>
>> HTTP request sent, awaiting response... 302 Found
>> Location: https://osdn.dl.osdn.net/users/23/23887/rx-qemu.dtb [following]
>> --2020-03-08 17:17:31-- https://osdn.dl.osdn.net/users/23/23887/rx-qemu.dtb
>> Resolving osdn.dl.osdn.net (osdn.dl.osdn.net)... 202.221.179.23
>> Connecting to osdn.dl.osdn.net
>> (osdn.dl.osdn.net)|202.221.179.23|:443... connected.
>> HTTP request sent, awaiting response... 404 Not Found
>> 2020-03-08 17:17:32 ERROR 404: Not Found.
>
> Permernet link is bellow.
> https://osdn.net/users/ysato/pf/qemu/dl/u-boot.bin.gz
> https://osdn.net/users/ysato/pf/qemu/dl/rx-virt.dtb
> https://osdn.net/users/ysato/pf/qemu/dl/zImage
Acceptance tests assert that "something that used to work in the past is
still working today". The artifact hash is here to verify the file has
not been modified (for security reasons or replaced by something else)
so we keep testing the same.
If you upgrade these files, we should keep testing the older version,
and eventually add a new test (or entry in the same test) to test the
new files.
>
> I was misunderstanding. sorry.
>
>>> + dtb_hash = '7b4e4e2c71905da44e86ce47adee2210b026ac18'
>>> + dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
>>> + kernel_url = ('http://acc.dl.osdn.jp/users/23/23845/zImage')
>>> + kernel_hash = '39a81067f8d72faad90866ddfefa19165d68fc99'
>>> + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
>>> +
>>> + self.vm.set_machine('rx-virt')
>>> + self.vm.set_console()
>>> + kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'earlycon'
>>> + self.vm.add_args('-kernel', kernel_path,
>>> + '-dtb', dtb_path,
>>> + '-no-reboot')
>>> + self.vm.launch()
>>> + self.wait_for_console_pattern('Sash command shell (version 1.1.1)')
>>> + self.exec_command_and_wait_for_pattern('printenv',
>>> + 'TERM=linux')
>>>
>>
>>
>
next prev parent reply other threads:[~2020-03-09 10:55 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-24 14:19 [PATCH v32 00/22] Add RX archtecture support Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 01/22] MAINTAINERS: Add RX Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 02/22] qemu/bitops.h: Add extract8 and extract16 Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 03/22] hw/registerfields.h: Add 8bit and 16bit register macros Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 04/22] target/rx: TCG translation Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 05/22] target/rx: TCG helper Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 06/22] target/rx: CPU definition Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 07/22] target/rx: RX disassembler Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 08/22] target/rx: Disassemble rx_index_addr into a string Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 09/22] target/rx: Replace operand with prt_ldmi in disassembler Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 10/22] target/rx: Use prt_ldmi for XCHG_mr disassembly Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 11/22] target/rx: Emit all disassembly in one prt() Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 12/22] target/rx: Collect all bytes during disassembly Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 13/22] target/rx: Dump bytes for each insn " Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 14/22] hw/intc: RX62N interrupt controller (ICUa) Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 15/22] hw/timer: RX62N internal timer modules Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 16/22] hw/char: RX62N serial communication interface (SCI) Yoshinori Sato
2020-03-08 15:41 ` Philippe Mathieu-Daudé
2020-03-09 6:25 ` Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 17/22] hw/rx: RX Target hardware definition Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 18/22] hw/rx: Honor -accel qtest Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 19/22] hw/rx: Restrict the RX62N microcontroller to the RX62N CPU core Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 20/22] Add rx-softmmu Yoshinori Sato
2020-02-24 15:26 ` Eric Blake
2020-02-24 14:19 ` [PATCH v32 21/22] BootLinuxConsoleTest: Test the RX-Virt machine Yoshinori Sato
2020-03-08 16:20 ` Philippe Mathieu-Daudé
2020-03-09 6:30 ` Yoshinori Sato
2020-03-09 10:54 ` Philippe Mathieu-Daudé [this message]
2020-03-09 13:36 ` Yoshinori Sato
2020-02-24 14:19 ` [PATCH v32 22/22] qemu-doc.texi: Add RX section Yoshinori Sato
2020-03-07 17:38 ` Philippe Mathieu-Daudé
2020-03-08 3:49 ` Yoshinori Sato
2020-02-24 14:47 ` [PATCH v32 00/22] Add RX archtecture support no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0ead8621-e590-d81c-c71a-9213108fa13f@redhat.com \
--to=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).