Re: [Qemu-devel] How to Linux kernel for MIPSEL qemu

[PianoPan <pianopan@gmail.com>]

Thiemo:

Thanks for your suggestion.

Yes, it is a issue about endianness. I already fix it. The default of
kernel for MIPS Qemu is not support the little endian. The
arch/mips/Kconfig must be updated for mipsel.


Thanks for ur help!

Best regard!

Pan
On 5/18/07, Thiemo Seufer <ths@networkno.de> wrote:
> PianoPan wrote:
> > Hello every one,
> >
> > I try to build a mipsel kernel by myself for qemu-system-mipsel. But
> > the qemu can not boot it properly. Is there anyone can give me some
> > suggestion about it.
> >
> > My method is following,
> >
> > * Get the kernel of 2.6.18.3 from kernel.org
>
> In general the source tree from www.linux-mips.org is morfe likely
> to work.
>
> > * Get the config.gz from the mipsel kernel that be provided by Qemu web.
> > * uncompress config.gz and rename it as .config, copy it to Linux
> > kernel directory .
> > * in the kernel directory, use following command to build the kernel
> > make ARCH=mips
> > CROSS_COMPILE=/opt/noki/mipsel-unknown-linux/sdktool/bin/mipsel-unknown-linux-
> > oldconfig
> >
> > make ARCH=mips
> > CROSS_COMPILE=/opt/noki/mipsel-unknown-linux/sdktool/bin/mipsel-unknown-linux-
> > all
>
> Looks ok.
>
> > after build , I use qemu 0.9 to boot it, and do not successes.
> >
> > #qemu-system-mipsel -kernel vmlinux -initrd initrd.gz -append
> > "console=ttyS0"
> > qemu: Warning, could not load MIPS bios
> > '/opt/noki/mipsel-unknown-linux//sdktool//share/qemu/mipsel_bios.bin'
> > qemu: could not load kernel 'vmlinux'
>
> This means Qemu's built-in ELF loader failed to load the vmlinux
> binary. I've seen that when attempting to load a kernel with the
> wrong endianness.
>
> Maybe you want to try the Debian installer image, e.g. from
> http://ftp.uk.debian.org/debian/dists/etch/main/installer-mipsel/current/images/qemu/netboot/
>
>
> Thiemo
>