From: "J. Mayer" <l_indien@magic.fr>
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [ADD] PPC processor emulation
Date: 18 Nov 2003 08:48:12 +0100 [thread overview]
Message-ID: <1069141692.13658.2220.camel@rapid> (raw)
In-Reply-To: <1069140512.14646.2174.camel@rapid>
elfload.c.diff
Make it able to load PPC ELF executables.
At least for static ones and a few dynamic ones.
diff -urNbB -x CVS qemu-current/elfload.c qemu/elfload.c
--- qemu-current/elfload.c Tue Nov 18 06:51:07 2003
+++ qemu/elfload.c Tue Nov 11 00:30:10 2003
@@ -104,6 +104,46 @@
#endif
+#ifdef TARGET_PPC
+
+#define ELF_START_MMAP 0x80000000
+
+#define elf_check_arch(x) ( (x) == EM_PPC )
+
+#define ELF_CLASS ELFCLASS32
+#ifdef TARGET_WORDS_BIGENDIAN
+#define ELF_DATA ELFDATA2MSB
+#else
+#define ELF_DATA ELFDATA2LSB
+#endif
+#define ELF_ARCH EM_PPC
+
+/* Note that isn't exactly what regular kernel does
+ * but this is what the ABI wants and is needed to allow
+ * execution of PPC BSD programs.
+ */
+#define ELF_PLAT_INIT(_r) \
+do { \
+ unsigned long *pos = (unsigned long *)bprm->p, tmp = 1; \
+ _r->gpr[3] = bprm->argc; \
+ _r->gpr[4] = (unsigned long)++pos; \
+ for (; tmp != 0; pos++) \
+ tmp = *pos; \
+ _r->gpr[5] = (unsigned long)pos; \
+} while (0)
+
+static inline void init_thread(struct target_pt_regs *_regs, struct image_info *infop)
+{
+ _regs->msr = 1 << MSR_PR; /* Set user mode */
+ _regs->gpr[1] = infop->start_stack;
+ _regs->nip = infop->entry;
+}
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+#endif
+
#include "elf.h"
/*
next prev parent reply other threads:[~2003-11-18 8:45 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-17 9:51 [Qemu-devel] new knoppix SegFault Jens Arm
2003-11-18 7:15 ` [Qemu-devel] [PATCH] Fixes for qemu J. Mayer
2003-11-18 7:30 ` J. Mayer
2003-11-18 7:31 ` Chad Page
2003-11-18 7:32 ` J. Mayer
2003-11-18 7:33 ` J. Mayer
2003-11-18 7:34 ` J. Mayer
2003-11-18 8:24 ` J. Mayer
2003-11-18 7:22 ` [Qemu-devel] [ADD] floppy disk emulation J. Mayer
2003-11-18 7:37 ` J. Mayer
2003-11-18 7:38 ` J. Mayer
2003-11-18 7:39 ` J. Mayer
2003-11-18 7:39 ` J. Mayer
2003-11-18 8:24 ` J. Mayer
2003-11-18 7:28 ` [Qemu-devel] [ADD] PPC processor emulation J. Mayer
2003-11-18 7:43 ` J. Mayer
2003-11-18 7:43 ` J. Mayer
2003-11-18 7:44 ` J. Mayer
2003-11-18 7:45 ` J. Mayer
2003-11-18 7:45 ` J. Mayer
2003-11-18 7:46 ` J. Mayer
2003-11-18 7:46 ` J. Mayer
2003-11-18 7:48 ` J. Mayer [this message]
2003-11-18 7:48 ` J. Mayer
2003-11-18 7:49 ` J. Mayer
2003-11-18 7:50 ` J. Mayer
2003-11-18 7:50 ` J. Mayer
2003-11-18 7:51 ` J. Mayer
2003-11-18 7:53 ` J. Mayer
2003-11-18 7:54 ` J. Mayer
2003-11-18 7:55 ` J. Mayer
2003-11-18 7:56 ` J. Mayer
2003-11-18 7:56 ` J. Mayer
2003-11-18 7:57 ` J. Mayer
2003-11-18 7:58 ` J. Mayer
2003-11-18 7:59 ` J. Mayer
2003-11-18 7:59 ` J. Mayer
2003-11-18 8:00 ` J. Mayer
2003-11-18 8:02 ` [Qemu-devel] [ADD] tests for PPC target J. Mayer
2003-11-18 8:06 ` J. Mayer
2003-11-18 8:08 ` J. Mayer
2003-11-18 8:08 ` J. Mayer
2003-11-18 8:09 ` J. Mayer
2003-11-18 8:10 ` J. Mayer
2003-11-18 8:25 ` J. Mayer
2003-11-18 8:24 ` [Qemu-devel] [ADD] PPC processor emulation J. Mayer
2003-11-18 9:37 ` Gwenole Beauchesne
2003-11-18 10:37 ` J. Mayer
2003-11-18 11:39 ` Raymond W. Lucke IV
2003-11-18 12:13 ` J. Mayer
2003-11-18 20:24 ` Raymond W. Lucke IV
2003-11-18 20:44 ` Jocelyn Mayer
2003-11-18 21:48 ` Chad Page
2003-11-18 22:50 ` J. Mayer
2003-11-19 1:11 ` Benjamin Herrenschmidt
2003-11-19 15:35 ` Jocelyn Mayer
2003-11-18 12:24 ` Gwenole Beauchesne
2003-11-18 12:57 ` Johan Rydberg
2003-11-18 14:52 ` Gwenole Beauchesne
2003-11-18 14:59 ` Jocelyn Mayer
2003-11-18 7:29 ` [Qemu-devel] [PATCH] Term prompt for qemu J. Mayer
2003-11-18 8:11 ` J. Mayer
2003-11-18 8:11 ` J. Mayer
2003-11-18 8:13 ` J. Mayer
2003-11-18 8:25 ` J. Mayer
-- strict thread matches above, loose matches on Subject: below --
2003-11-18 22:28 [Qemu-devel] [ADD] PPC processor emulation J. Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1069141692.13658.2220.camel@rapid \
--to=l_indien@magic.fr \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).