[Qemu-devel] Re: WINE with QEMU on PPC

[Wim Vanderbauwhede <wim@motherearth.org>]

On Mon, 2004-06-07 at 13:36, Sander Nagtegaal wrote: 
> -Put them in the target platform directory (mine is /home/ARCHS/rh_x86)
> -Install the rpm's using rpm2cpio and cpio: 
> e.g. 
> $ rpm2cpio ash-0.3.8-8.i386.rpm | cpio -idv
> 
> Just a small question. Can I give the target platform directory any name I 
> want? And then just change the dir? Or does it have to be a /ARCHS/rh_x86 
> type of directory?
It can be any name you like. I just mentioned the name I gave because it
also occurs in the config file.


On Mon, 2004-06-07 at 14:35, Sander Nagtegaal wrote:
> groff: error while loading shared libraries: 
> /home/azrael/Emulation/usr/lib/libstdc++.so.5: ELF file data encoding not 
> big-endian
> 
> Another thing is that when I now run a "man **** " command it gives errors. 
> All my man pages are not working anymore.........maybe some declare path is 
> wrong?
> 
I'm afraid that's normal: your LD_LIBRARY_PATH now points to the x86
libraries. If you just open a new terminal window, and run "man" there,
that should be OK.
To avoid this kind of problem, I put my qemu-specific commands in shell
scripts. The "declare" statements are only valid within the enviroment
of the script, not outside it. 

On Mon, 2004-06-07 at 14:26, Sander Nagtegaal wrote: 
> [azrael@localhost Emulation]$ qemu-i386 -L /home/azrael/Emulation 
> /home/azrael/Emulation/usr/bin/wineserver
> qemu: uncaught target signal 11 (Segmentation fault) - exiting
> 
> That's what I got trying to run winserver. What could be the problem?

The wineserver error is a different issue. What qemu are you using? I am
now using qemu-0.5.5, and wine-20040505; before, I used qemu-0.5.3 and
wine-20040309. 
I have glibc-2.3.3 and I use gcc-3.3.2 for building. 
But I'm just a user, segfaults in qemu is something for the real
qemu-guru's.

Cheers,

Wim


> Op maandag 7 juni 2004 12:27, schreef u:
> > In attachment my wine config file. Save it as ~/.wine/config
> > and edit the "Path" entries under the [Drive ...] entries a bit so that
> > all paths point to meaningful directories:
> >
> > [Drive C]
> > "Path"="/home/ARCHS/rh_x86/usr/share/wine-c"
> > "Type" = "hd"
> > "Label" = "MS-DOS"
> > "Filesystem" = "win95"
> >                                                                            
> >   [Drive D] "Path" = "/mnt/cdrom"
> > "Type" = "cdrom"
> > "Label" = "CD-Rom"
> > "Filesystem" = "win95"
> > ; make sure that device is correct and has proper permissions !
> > "Device" = "/dev/cdrom"
> >                                                                            
> >     [Drive E] "Path" = "/tmp"
> > "Type" = "hd"
> > "Label" = "Tmp Drive"
> > "Filesystem" = "win95"
> >                                                                            
> >     [Drive F] "Path" = "/home/wim"
> > "Type" = "network"
> > "Label" = "Home"
> > "Filesystem" = "win95"
> >                                                                            
> >     [Drive G] "Path" = "/home/ARCHS/rh_x86"
> > "Type" = "hd"
> > "Label" = "MS-DOS"
> > "Filesystem" = "win95"
> >
> > On Mon, 2004-06-07 at 10:53, Sander Nagtegaal wrote:
> > > Op maandag 7 juni 2004 10:29, schreef u:
> > > > -I assume you know how to set up wine (I mean adapting the
> > > > ~/.wine/config file). My qemu-wine home directory is usr/share/wine-c
> > > > in the target platform directory. If you like I can mail my
> > > > .wine/config file.
> > >
> > > No......I do not know how to set up wine..That was my next problem after
> > > I managed to let qemu run the "ls" file. Could you mail the config or
> > > email me how to set it up? Thanks alot! You're a great help. I'm going to
> > > try it!
> 
>