qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Marc-André Lureau" <mlureau@redhat.com>
To: "Denis V. Lunev" <den-lists@parallels.com>
Cc: marcandre lureau <marcandre.lureau@redhat.com>,
	qemu-devel@nongnu.org, mdroth@linux.vnet.ibm.com
Subject: Re: [Qemu-devel] [PATCH v3 11/12] qga: add --dump-conf option
Date: Wed, 26 Aug 2015 15:03:43 -0400 (EDT)	[thread overview]
Message-ID: <1151210754.1699404.1440615823881.JavaMail.zimbra@redhat.com> (raw)
In-Reply-To: <55DE0CE3.90208@parallels.com>



----- Original Message -----
> On 08/26/2015 01:05 PM, marcandre.lureau@redhat.com wrote:
> > From: Marc-André Lureau <marcandre.lureau@redhat.com>
> >
> > This new option allows to review the agent configuration,
> > and ease the task of writing a configuration file.
> >
> > Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> > Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
> > ---
> >   qga/main.c | 62
> >   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >   1 file changed, 62 insertions(+)
> >
> > diff --git a/qga/main.c b/qga/main.c
> > index 9193043..72dc366 100644
> > --- a/qga/main.c
> > +++ b/qga/main.c
> > @@ -941,6 +941,7 @@ typedef struct GAConfig {
> >       GList *blacklist;
> >       int daemonize;
> >       GLogLevelFlags log_level;
> > +    int dumpconf;
> >   } GAConfig;
> >   
> >   static void config_load(GAConfig *config)
> > @@ -1009,6 +1010,58 @@ end:
> >       g_clear_error(&gerr);
> >   }
> >   
> > +static gchar *list_join(GList *list, const gchar separator)
> > +{
> > +    GString *str = g_string_new("");
> > +
> > +    while (list) {
> > +        str = g_string_append(str, (gchar *)list->data);
> > +        list = g_list_next(list);
> > +        if (list) {
> > +            str = g_string_append_c(str, separator);
> > +        }
> > +    }
> > +
> > +    return g_string_free(str, FALSE);
> > +}
> > +
> > +static void config_dump(GAConfig *config)
> > +{
> > +    GError *error = NULL;
> > +    GKeyFile *keyfile;
> > +    gchar *tmp;
> > +
> > +    keyfile = g_key_file_new();
> keyfile == NULL either means error and you should
> immediately return as I am not quite sure that calls
> below will survive

let's add an assert() there.

> Thus the check below for keyfile == NULL is extra
> and could be dropped. If these functions are OK
> with NULL then free will be also fine too and check
> is not needed too.

ok

> 
> > +    g_key_file_set_boolean(keyfile, "general", "daemon",
> > config->daemonize);
> > +    g_key_file_set_string(keyfile, "general", "method", config->method);
> > +    g_key_file_set_string(keyfile, "general", "path",
> > config->channel_path);
> > +    if (config->log_filepath) {
> > +        g_key_file_set_string(keyfile, "general", "logfile",
> > +                              config->log_filepath);
> > +    }
> > +    g_key_file_set_string(keyfile, "general", "pidfile",
> > config->pid_filepath);
> > +#ifdef CONFIG_FSFREEZE
> > +    if (config->fsfreeze_hook) {
> > +        g_key_file_set_string(keyfile, "general", "fsfreeze-hook",
> > +                              config->fsfreeze_hook);
> > +    }
> > +#endif
> > +    g_key_file_set_string(keyfile, "general", "statedir",
> > config->state_dir);
> > +    g_key_file_set_boolean(keyfile, "general", "verbose",
> > +                           config->log_level == G_LOG_LEVEL_MASK);
> > +    tmp = list_join(config->blacklist, ',');
> > +    g_key_file_set_string(keyfile, "general", "blacklist", tmp);
> > +    g_free(tmp);
> > +
> > +    tmp = g_key_file_to_data(keyfile, NULL, &error);
> > +    printf("%s", tmp);
> > +
> > +    g_free(tmp);
> > +    if (keyfile) {
> > +        g_key_file_free(keyfile);
> > +    }
> > +}
> > +
> >   static void config_parse(GAConfig *config, int argc, char **argv)
> >   {
> >       const char *sopt = "hVvdm:p:l:f:F::b:s:t:D";
> > @@ -1016,6 +1069,7 @@ static void config_parse(GAConfig *config, int argc,
> > char **argv)
> >       const struct option lopt[] = {
> >           { "help", 0, NULL, 'h' },
> >           { "version", 0, NULL, 'V' },
> > +        { "dump-conf", 0, NULL, 'D' },
> >           { "logfile", 1, NULL, 'l' },
> >           { "pidfile", 1, NULL, 'f' },
> >   #ifdef CONFIG_FSFREEZE
> > @@ -1067,6 +1121,9 @@ static void config_parse(GAConfig *config, int argc,
> > char **argv)
> >           case 'd':
> >               config->daemonize = 1;
> >               break;
> > +        case 'D':
> > +            config->dumpconf = 1;
> > +            break;
> >           case 'b': {
> >               if (is_help_option(optarg)) {
> >                   qmp_for_each_command(ga_print_cmd, NULL);
> > @@ -1310,6 +1367,11 @@ int main(int argc, char **argv)
> >                                                    config->state_dir);
> >       s->frozen = check_is_frozen(s);
> >   
> > +    if (config->dumpconf) {
> > +        config_dump(config);
> > +        goto end;
> > +    }
> > +
> >       ret = run_agent(s, config);
> >   
> >   end:
> 
> 

  reply	other threads:[~2015-08-26 19:03 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-26 10:05 [Qemu-devel] [PATCH v3 00/12] qemu-ga: add a configuration file marcandre.lureau
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 01/12] qga: misc spelling marcandre.lureau
2015-08-26 17:40   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 02/12] qga: use exit() when parsing options marcandre.lureau
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 03/12] qga: move string split in separate function marcandre.lureau
2015-08-26 17:55   ` Denis V. Lunev
2015-08-26 18:07     ` Marc-André Lureau
2015-08-26 18:23       ` Denis V. Lunev
2015-08-26 18:30         ` Marc-André Lureau
2015-08-26 18:33           ` Marc-André Lureau
2015-08-26 18:44           ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 04/12] qga: rename 'path' to 'channel_path' marcandre.lureau
2015-08-26 17:56   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 05/12] qga: copy argument strings marcandre.lureau
2015-08-26 18:09   ` Denis V. Lunev
2015-08-26 18:17     ` Marc-André Lureau
2015-08-26 18:27       ` Denis V. Lunev
2015-08-26 18:41         ` Marc-André Lureau
2015-08-26 18:49           ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 06/12] qga: move option parsing to separate function marcandre.lureau
2015-08-26 18:11   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 07/12] qga: fill default options in main() marcandre.lureau
2015-08-26 18:14   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 08/12] qga: move agent run in a separate function marcandre.lureau
2015-08-26 18:32   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 09/12] qga: free a bit more marcandre.lureau
2015-08-26 18:35   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 10/12] qga: add an optionnal qemu-ga.conf system configuration marcandre.lureau
2015-08-26 12:55   ` Eric Blake
2015-08-26 15:11     ` Marc-André Lureau
2015-08-26 15:17       ` Michael Roth
2015-08-26 18:41   ` Denis V. Lunev
2015-08-26 18:45     ` Marc-André Lureau
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 11/12] qga: add --dump-conf option marcandre.lureau
2015-08-26 19:00   ` Denis V. Lunev
2015-08-26 19:03     ` Marc-André Lureau [this message]
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 12/12] qga: start a man page marcandre.lureau
2015-08-26 19:08   ` Denis V. Lunev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1151210754.1699404.1440615823881.JavaMail.zimbra@redhat.com \
    --to=mlureau@redhat.com \
    --cc=den-lists@parallels.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=mdroth@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).