* [Qemu-devel] 2.6 kernel + new timing code + kqemu (-kernel-kqemu)
@ 2006-07-14 18:42 Lonnie Mendez
2006-07-14 18:50 ` Fabrice Bellard
0 siblings, 1 reply; 3+ messages in thread
From: Lonnie Mendez @ 2006-07-14 18:42 UTC (permalink / raw)
To: qemu-devel
I ran a limited test with the new code to see what works. All tests run
with kqemu enabled binary (1.3.0pre9). Host is a laptop w/ pentium 3
mobile processor running ubuntu linux.
deb-sid (2.6.17-1-686 SMP):
qemu -hda deb-sid.qcow -no-kqemu
boots to login prompt
qemu -hda deb-sid.qcow
boots to login prompt
qemu -hda deb-sid.qcow -kernel-kqemu
hangs on boot with:
hda: QEMU HARDDISK, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 6291456 sectors (3221 MB) w/256KiB Cache, CHS=6241/255/63, (U)DMA
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: set_multmode: status=0x41 { DriveReady Error }
hda: set_multmode: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
... hangs ...
qemu -hda deb-sid.qcow -kernel-kqemu -no-acpi
boots to login prompt
I also tried an old fedora core 5 install iso 'FC-5-i386-disc1.iso'
since it uses a 2.6 kernel:
qemu -cdrom FC-5-i386-disc1.iso -kernel-kqemu
hangs on boot with:
hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide-cd: cmd 0x5a timed out
hdc: lost interrupt
ide-cd: cmd 0x5a timed out
hdc: lost interrupt
hdc: ATAPI 4X CD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
it will boot appending -no-acpi. For whatever reason the images will
boot with qemu on windows host without problem.
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Qemu-devel] 2.6 kernel + new timing code + kqemu (-kernel-kqemu)
2006-07-14 18:42 [Qemu-devel] 2.6 kernel + new timing code + kqemu (-kernel-kqemu) Lonnie Mendez
@ 2006-07-14 18:50 ` Fabrice Bellard
2006-07-14 19:10 ` Lonnie Mendez
0 siblings, 1 reply; 3+ messages in thread
From: Fabrice Bellard @ 2006-07-14 18:50 UTC (permalink / raw)
To: qemu-devel
Lonnie Mendez wrote:
> I ran a limited test with the new code to see what works. All tests run
> with kqemu enabled binary (1.3.0pre9). Host is a laptop w/ pentium 3
> mobile processor running ubuntu linux.
>
> deb-sid (2.6.17-1-686 SMP):
>
> qemu -hda deb-sid.qcow -no-kqemu
> boots to login prompt
>
> qemu -hda deb-sid.qcow
> boots to login prompt
>
> qemu -hda deb-sid.qcow -kernel-kqemu
> hangs on boot with:
>
> hda: QEMU HARDDISK, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 512KiB
> hda: 6291456 sectors (3221 MB) w/256KiB Cache, CHS=6241/255/63, (U)DMA
> hda: lost interrupt
> hda: lost interrupt
> hda: lost interrupt
> hda: set_multmode: status=0x41 { DriveReady Error }
> hda: set_multmode: error=0x04 { DriveStatusError }
> ide: failed opcode was: 0xef
> ... hangs ...
Did you have the same problem before the timer patch ?
> qemu -hda deb-sid.qcow -kernel-kqemu -no-acpi
> boots to login prompt
>
> I also tried an old fedora core 5 install iso 'FC-5-i386-disc1.iso'
> since it uses a 2.6 kernel:
>
> qemu -cdrom FC-5-i386-disc1.iso -kernel-kqemu
> hangs on boot with:
>
> hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> ide-cd: cmd 0x5a timed out
> hdc: lost interrupt
> ide-cd: cmd 0x5a timed out
> hdc: lost interrupt
> hdc: ATAPI 4X CD-ROM drive, 512kB Cache
> Uniform CD-ROM driver Revision: 3.20
>
> it will boot appending -no-acpi. For whatever reason the images will
> boot with qemu on windows host without problem.
>
>
>
>
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/qemu-devel
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Qemu-devel] 2.6 kernel + new timing code + kqemu (-kernel-kqemu)
2006-07-14 18:50 ` Fabrice Bellard
@ 2006-07-14 19:10 ` Lonnie Mendez
0 siblings, 0 replies; 3+ messages in thread
From: Lonnie Mendez @ 2006-07-14 19:10 UTC (permalink / raw)
To: qemu-devel
On Fri, 2006-07-14 at 20:50 +0200, Fabrice Bellard wrote:
> Lonnie Mendez wrote:
> > I ran a limited test with the new code to see what works. All tests run
> > with kqemu enabled binary (1.3.0pre9). Host is a laptop w/ pentium 3
> > mobile processor running ubuntu linux.
> >
> > deb-sid (2.6.17-1-686 SMP):
> >
> > qemu -hda deb-sid.qcow -no-kqemu
> > boots to login prompt
> >
> > qemu -hda deb-sid.qcow
> > boots to login prompt
> >
> > qemu -hda deb-sid.qcow -kernel-kqemu
> > hangs on boot with:
> >
> > hda: QEMU HARDDISK, ATA DISK drive
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
> > ide1 at 0x170-0x177,0x376 on irq 15
> > hda: max request size: 512KiB
> > hda: 6291456 sectors (3221 MB) w/256KiB Cache, CHS=6241/255/63, (U)DMA
> > hda: lost interrupt
> > hda: lost interrupt
> > hda: lost interrupt
> > hda: set_multmode: status=0x41 { DriveReady Error }
> > hda: set_multmode: error=0x04 { DriveStatusError }
> > ide: failed opcode was: 0xef
> > ... hangs ...
>
> Did you have the same problem before the timer patch ?
No. The problem is not evident with qemu 0.8.1 release and CVS
checkouts from before the timer patch.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-07-14 19:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-07-14 18:42 [Qemu-devel] 2.6 kernel + new timing code + kqemu (-kernel-kqemu) Lonnie Mendez
2006-07-14 18:50 ` Fabrice Bellard
2006-07-14 19:10 ` Lonnie Mendez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).