[Qemu-devel] Running Qemu ARM using NFS on Windows

[Qemu-devel] Running Qemu ARM using NFS on Windows

[Tieu Ma Dau]

[-- Attachment #1: Type: text/plain, Size: 1081 bytes --]

Hi all,
I ran successfully Qemu to simulate ARM system on Linux host with the following command:
./qemu-system-arm -kernel zImage.integratorCP -append "root=/dev/nfs nfsroot=192.168.7.1:/mnt/nfsqemu rw ip=192.168.7.2::192.168.7.1:255.255.255.0 " -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=./qemu-ifup
The content of qemu-ifup script is: 
ifconfig tap0 192.168.7.1

But my project demands me to run this ARM system on Windows host. So I modify a bit the qemu-ifup script as:
ipconfig tap0 192.168.7.1 # "ipconfig" , not "ifconfig"
And the corresponding command on Windows is:
qemu-system-arm -kernel zImage.integrator -append "root=/dev/nfs nfsroot=192.
168.7.1:/c/cygwin/openpsion rw ip=192.168.7.2::192.168.7.1:255.255.255.0" -net
nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=./qemu-ifup

But the error I got is:
tap: Could not open 'tap0'
Could not initialize device 'tap

Do you have any ideas?
Best regards,
Tieu

 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[-- Attachment #2: Type: text/html, Size: 1157 bytes --]

[Qemu-devel] Running Qemu ARM using NFS on Windows

[Tieu Ma Dau]

[-- Attachment #1: Type: text/plain, Size: 1065 bytes --]

   Hi all,
I ran successfully Qemu to simulate ARM system on Linux host with the following command:
./qemu-system-arm -kernel zImage.integratorCP -append "root=/dev/nfs nfsroot=192.168.7.1:/mnt/nfsqemu rw ip=192.168.7.2::192.168.7.1:255.255.255.0 " -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=./qemu-ifup
The content of qemu-ifup script is: 
ifconfig tap0 192.168.7.1

But my project demands me to run this ARM system on Windows host. So I modify a bit the qemu-ifup script as:
ipconfig tap0 192.168.7.1 # "ipconfig" , not "ifconfig"
And the corresponding command on Windows is:
qemu-system-arm -kernel zImage.integrator -append "root=/dev/nfs nfsroot=192.
168.7.1:/c/cygwin/openpsionfiltered=192.168.7.2::192.168.7.1:255.255.255.0" -net
nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=./qemu-ifup

But the error I got is:
tap: Could not open 'tap0'
Could not initialize device 'tap

Do you have any ideas?
Best  regards,
Tieu
 		
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates starting at 1¢/min.

[-- Attachment #2: Type: text/html, Size: 1227 bytes --]

Re: [Qemu-devel] Running Qemu ARM using NFS on Windows

[Lonnie Mendez]

On Tue, 2006-08-08 at 03:20 -0700, Tieu Ma Dau wrote:
> Hi all,
> I ran successfully Qemu to simulate ARM system on Linux host with the
> following command:
> ./qemu-system-arm -kernel zImage.integratorCP -append "root=/dev/nfs
> nfsroot=192.168.7.1:/mnt/nfsqemu rw
> ip=192.168.7.2::192.168.7.1:255.255.255.0 " -net nic,vlan=0 -net
> tap,vlan=0,ifname=tap0,script=./qemu-ifup
> The content of qemu-ifup script is: 
> ifconfig tap0 192.168.7.1
> 
> But my project demands me to run this ARM system on Windows host. So I
> modify a bit the qemu-ifup script as:
> ipconfig tap0 192.168.7.1 # "ipconfig" , not "ifconfig"
> And the corresponding command on Windows is:
> qemu-system-arm -kernel zImage.integrator -append "root=/dev/nfs
> nfsroot=192.
> 168.7.1:/c/cygwin/openpsionfiltered=192.168.7.2::192.168.7.1:255.255.255.0" -net
> nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=./qemu-ifup
> 
> But the error I got is:
> tap: Could not open 'tap0'
> Could not initialize device 'tap

   See the Qemu on Windows documentation section on "Using Tap."
http://www.h7.dion.ne.jp/~qemu-win/