From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Bernhard Beschow" <shentey@gmail.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Aurelien Jarno" <aurelien@aurel32.net>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"Hervé Poussineau" <hpoussin@reactos.org>
Subject: [PULL v2 62/78] hw/isa/piix: Rename functions to be shared for PCI interrupt triggering
Date: Thu, 19 Oct 2023 14:23:57 -0400 [thread overview]
Message-ID: <12103341c1802cc2ba2f265f44a65e26fd37b918.1697739629.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1697739629.git.mst@redhat.com>
From: Bernhard Beschow <shentey@gmail.com>
PIIX4 will get the same optimizations which are already implemented for
PIIX3.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-26-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/isa/piix.c | 72 +++++++++++++++++++++++++--------------------------
1 file changed, 36 insertions(+), 36 deletions(-)
diff --git a/hw/isa/piix.c b/hw/isa/piix.c
index 2ab799b95e..449c1baaab 100644
--- a/hw/isa/piix.c
+++ b/hw/isa/piix.c
@@ -38,47 +38,47 @@
#include "migration/vmstate.h"
#include "hw/acpi/acpi_aml_interface.h"
-static void piix3_set_irq_pic(PIIXState *piix3, int pic_irq)
+static void piix_set_irq_pic(PIIXState *s, int pic_irq)
{
- qemu_set_irq(piix3->isa_irqs_in[pic_irq],
- !!(piix3->pic_levels &
+ qemu_set_irq(s->isa_irqs_in[pic_irq],
+ !!(s->pic_levels &
(((1ULL << PIIX_NUM_PIRQS) - 1) <<
(pic_irq * PIIX_NUM_PIRQS))));
}
-static void piix3_set_irq_level_internal(PIIXState *piix3, int pirq, int level)
+static void piix_set_pci_irq_level_internal(PIIXState *s, int pirq, int level)
{
int pic_irq;
uint64_t mask;
- pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq];
+ pic_irq = s->dev.config[PIIX_PIRQCA + pirq];
if (pic_irq >= ISA_NUM_IRQS) {
return;
}
mask = 1ULL << ((pic_irq * PIIX_NUM_PIRQS) + pirq);
- piix3->pic_levels &= ~mask;
- piix3->pic_levels |= mask * !!level;
+ s->pic_levels &= ~mask;
+ s->pic_levels |= mask * !!level;
}
-static void piix3_set_irq_level(PIIXState *piix3, int pirq, int level)
+static void piix_set_pci_irq_level(PIIXState *s, int pirq, int level)
{
int pic_irq;
- pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq];
+ pic_irq = s->dev.config[PIIX_PIRQCA + pirq];
if (pic_irq >= ISA_NUM_IRQS) {
return;
}
- piix3_set_irq_level_internal(piix3, pirq, level);
+ piix_set_pci_irq_level_internal(s, pirq, level);
- piix3_set_irq_pic(piix3, pic_irq);
+ piix_set_irq_pic(s, pic_irq);
}
-static void piix3_set_irq(void *opaque, int pirq, int level)
+static void piix_set_pci_irq(void *opaque, int pirq, int level)
{
- PIIXState *piix3 = opaque;
- piix3_set_irq_level(piix3, pirq, level);
+ PIIXState *s = opaque;
+ piix_set_pci_irq_level(s, pirq, level);
}
static void piix4_set_irq(void *opaque, int irq_num, int level)
@@ -108,10 +108,10 @@ static void piix_request_i8259_irq(void *opaque, int irq, int level)
qemu_set_irq(s->cpu_intr, level);
}
-static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin)
+static PCIINTxRoute piix_route_intx_pin_to_irq(void *opaque, int pin)
{
- PIIXState *piix3 = opaque;
- int irq = piix3->dev.config[PIIX_PIRQCA + pin];
+ PCIDevice *pci_dev = opaque;
+ int irq = pci_dev->config[PIIX_PIRQCA + pin];
PCIINTxRoute route;
if (irq < ISA_NUM_IRQS) {
@@ -125,29 +125,29 @@ static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin)
}
/* irq routing is changed. so rebuild bitmap */
-static void piix3_update_irq_levels(PIIXState *piix3)
+static void piix_update_pci_irq_levels(PIIXState *s)
{
- PCIBus *bus = pci_get_bus(&piix3->dev);
+ PCIBus *bus = pci_get_bus(&s->dev);
int pirq;
- piix3->pic_levels = 0;
+ s->pic_levels = 0;
for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
- piix3_set_irq_level(piix3, pirq, pci_bus_get_irq_level(bus, pirq));
+ piix_set_pci_irq_level(s, pirq, pci_bus_get_irq_level(bus, pirq));
}
}
-static void piix3_write_config(PCIDevice *dev,
- uint32_t address, uint32_t val, int len)
+static void piix_write_config(PCIDevice *dev, uint32_t address, uint32_t val,
+ int len)
{
pci_default_write_config(dev, address, val, len);
if (ranges_overlap(address, len, PIIX_PIRQCA, 4)) {
- PIIXState *piix3 = PIIX_PCI_DEVICE(dev);
+ PIIXState *s = PIIX_PCI_DEVICE(dev);
int pic_irq;
- pci_bus_fire_intx_routing_notifier(pci_get_bus(&piix3->dev));
- piix3_update_irq_levels(piix3);
+ pci_bus_fire_intx_routing_notifier(pci_get_bus(&s->dev));
+ piix_update_pci_irq_levels(s);
for (pic_irq = 0; pic_irq < ISA_NUM_IRQS; pic_irq++) {
- piix3_set_irq_pic(piix3, pic_irq);
+ piix_set_irq_pic(s, pic_irq);
}
}
}
@@ -193,9 +193,9 @@ static void piix_reset(DeviceState *dev)
d->rcr = 0;
}
-static int piix3_post_load(void *opaque, int version_id)
+static int piix_post_load(void *opaque, int version_id)
{
- PIIXState *piix3 = opaque;
+ PIIXState *s = opaque;
int pirq;
/*
@@ -207,10 +207,10 @@ static int piix3_post_load(void *opaque, int version_id)
* Here, we update irq levels without raising the interrupt.
* Interrupt state will be deserialized separately through the i8259.
*/
- piix3->pic_levels = 0;
+ s->pic_levels = 0;
for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
- piix3_set_irq_level_internal(piix3, pirq,
- pci_bus_get_irq_level(pci_get_bus(&piix3->dev), pirq));
+ piix_set_pci_irq_level_internal(s, pirq,
+ pci_bus_get_irq_level(pci_get_bus(&s->dev), pirq));
}
return 0;
}
@@ -261,7 +261,7 @@ static const VMStateDescription vmstate_piix3 = {
.name = "PIIX3",
.version_id = 3,
.minimum_version_id = 2,
- .post_load = piix3_post_load,
+ .post_load = piix_post_load,
.pre_save = piix3_pre_save,
.fields = (VMStateField[]) {
VMSTATE_PCI_DEVICE(dev, PIIXState),
@@ -481,8 +481,8 @@ static void piix3_realize(PCIDevice *dev, Error **errp)
return;
}
- pci_bus_irqs(pci_bus, piix3_set_irq, piix3, PIIX_NUM_PIRQS);
- pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq);
+ pci_bus_irqs(pci_bus, piix_set_pci_irq, piix3, PIIX_NUM_PIRQS);
+ pci_bus_set_route_irq_fn(pci_bus, piix_route_intx_pin_to_irq);
}
static void piix3_init(Object *obj)
@@ -497,7 +497,7 @@ static void piix3_class_init(ObjectClass *klass, void *data)
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
- k->config_write = piix3_write_config;
+ k->config_write = piix_write_config;
k->realize = piix3_realize;
/* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
k->device_id = PCI_DEVICE_ID_INTEL_82371SB_0;
--
MST
next prev parent reply other threads:[~2023-10-19 18:29 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-19 18:24 [PULL v2 00/78] virtio,pc,pci: features, cleanups Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 01/78] vdpa: Use iovec for vhost_vdpa_net_cvq_add() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 02/78] vdpa: Avoid using vhost_vdpa_net_load_*() outside vhost_vdpa_net_load() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 03/78] vdpa: Check device ack in vhost_vdpa_net_load_rx_mode() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 04/78] vdpa: Move vhost_svq_poll() to the caller of vhost_vdpa_net_cvq_add() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 05/78] vdpa: Introduce cursors to vhost_vdpa_net_loadx() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 06/78] vhost: Expose vhost_svq_available_slots() Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 07/78] vdpa: Send cvq state load commands in parallel Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 08/78] tests: test-smp-parse: Add the test for cores/threads per socket helpers Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 09/78] tests: bios-tables-test: Prepare the ACPI table change for smbios type4 count test Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 10/78] tests: bios-tables-test: Add test for smbios type4 count Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 11/78] tests: bios-tables-test: Add ACPI table binaries for smbios type4 count test Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 12/78] tests: bios-tables-test: Prepare the ACPI table change for smbios type4 core " Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 13/78] tests: bios-tables-test: Add test for smbios type4 core count Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 14/78] tests: bios-tables-test: Add ACPI table binaries for smbios type4 core count test Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 15/78] tests: bios-tables-test: Prepare the ACPI table change for smbios type4 core count2 test Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 16/78] tests: bios-tables-test: Extend smbios core count2 test to cover general topology Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 17/78] tests: bios-tables-test: Update ACPI table binaries for smbios core count2 test Michael S. Tsirkin
2023-10-19 18:21 ` [PULL v2 18/78] tests: bios-tables-test: Prepare the ACPI table change for smbios type4 thread count test Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 19/78] tests: bios-tables-test: Add test for smbios type4 thread count Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 20/78] tests: bios-tables-test: Add ACPI table binaries for smbios type4 thread count test Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 21/78] tests: bios-tables-test: Prepare the ACPI table change for smbios type4 thread count2 test Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 22/78] tests: bios-tables-test: Add test for smbios type4 thread count2 Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 23/78] tests: bios-tables-test: Add ACPI table binaries for smbios type4 thread count2 test Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 24/78] vhost-user: strip superfluous whitespace Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 25/78] vhost-user: tighten "reply_supported" scope in "set_vring_addr" Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 26/78] vhost-user: factor out "vhost_user_write_sync" Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 27/78] vhost-user: flatten "enforce_reply" into "vhost_user_write_sync" Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 28/78] vhost-user: hoist "write_sync", "get_features", "get_u64" Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 29/78] vhost-user: allow "vhost_set_vring" to wait for a reply Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 30/78] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 31/78] memory: initialize 'fv' in MemoryRegionCache to make Coverity happy Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 32/78] vhost-user: do not send RESET_OWNER on device reset Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 33/78] vhost-backend: remove vhost_kernel_reset_device() Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 34/78] virtio: call ->vhost_reset_device() during reset Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 35/78] hw/i386/acpi-build: Remove build-time assertion on PIIX/ICH9 reset registers being identical Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 36/78] timer/i8254: Fix one shot PIT mode Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 37/78] hw/display: fix memleak from virtio_add_resource Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 38/78] hw/i386/pc: Merge two if statements into one Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 39/78] hw/i386/pc_piix: Allow for setting properties before realizing PIIX3 south bridge Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 40/78] hw/i386/pc_piix: Assign PIIX3's ISA interrupts before its realize() Michael S. Tsirkin
2023-10-19 18:22 ` [PULL v2 41/78] hw/isa/piix3: Resolve redundant PIIX_NUM_PIC_IRQS Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 42/78] hw/i386/pc_piix: Wire PIIX3's ISA interrupts by new "isa-irqs" property Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 43/78] hw/i386/pc_piix: Remove redundant "piix3" variable Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 44/78] hw/isa/piix3: Rename "pic" attribute to "isa_irqs_in" Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 45/78] hw/i386/pc_q35: Wire ICH9 LPC function's interrupts before its realize() Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 46/78] hw/isa/piix3: Wire PIC IRQs to ISA bus in host device Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 47/78] hw/i386/pc: Wire RTC ISA IRQs in south bridges Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 48/78] hw/isa/piix3: Create IDE controller in host device Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 49/78] hw/isa/piix3: Create USB " Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 50/78] hw/isa/piix3: Create power management " Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 51/78] hw/isa/piix3: Drop the "3" from PIIX base class name Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 52/78] hw/isa/piix4: Remove unused inbound ISA interrupt lines Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 53/78] hw/isa/piix4: Rename "isa" attribute to "isa_irqs_in" Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 54/78] hw/isa/piix4: Rename reset control operations to match PIIX3 Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 55/78] hw/isa/piix4: Reuse struct PIIXState from PIIX3 Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 56/78] hw/isa/piix3: Merge hw/isa/piix4.c Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 57/78] hw/isa/piix: Allow for optional PIC creation in PIIX3 Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 58/78] hw/isa/piix: Allow for optional PIT " Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 59/78] hw/isa/piix: Harmonize names of reset control memory regions Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 60/78] hw/isa/piix: Share PIIX3's base class with PIIX4 Michael S. Tsirkin
2023-10-19 18:23 ` [PULL v2 61/78] hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4 Michael S. Tsirkin
2023-10-19 18:23 ` Michael S. Tsirkin [this message]
2023-10-19 18:23 ` [PULL v2 63/78] hw/isa/piix: Reuse PIIX3's PCI interrupt triggering " Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 64/78] hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 65/78] hw/isa/piix: Implement multi-process QEMU support also for PIIX4 Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 66/78] hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 67/78] vhost-user-common: send get_inflight_fd once Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 68/78] vhost: move and rename the conn retry times Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 69/78] vhost-user-scsi: support reconnect to backend Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 70/78] vhost-user-scsi: start vhost when guest kicks Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 71/78] vhost-user: fix lost reconnect Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 72/78] hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 73/78] tests/acpi: Allow update of DSDT.cxl Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 74/78] hw/cxl: Add QTG _DSM support for ACPI0017 device Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 75/78] tests/acpi: Update DSDT.cxl with QTG DSM Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 76/78] vhost-user: Fix protocol feature bit conflict Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 77/78] MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section Michael S. Tsirkin
2023-10-19 18:24 ` [PULL v2 78/78] intel-iommu: Report interrupt remapping faults, fix return value Michael S. Tsirkin
2023-10-20 16:00 ` [PULL v2 00/78] virtio,pc,pci: features, cleanups Stefan Hajnoczi
2023-10-23 11:38 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12103341c1802cc2ba2f265f44a65e26fd37b918.1697739629.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=aurelien@aurel32.net \
--cc=hpoussin@reactos.org \
--cc=marcel.apfelbaum@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=shentey@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).