qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Amit Shah <amit.shah@qumranet.com>
To: qemu-devel@nongnu.org
Cc: Amit Shah <amit.shah@qumranet.com>, kvm@vger.kernel.org
Subject: [Qemu-devel] [PATCH 1/2] QEMU: Mask writes to RO bits in the status reg of PCI config space
Date: Mon, 26 May 2008 13:36:39 +0300	[thread overview]
Message-ID: <1211798213-4187-3-git-send-email-amit.shah@qumranet.com> (raw)
In-Reply-To: <1211798213-4187-2-git-send-email-amit.shah@qumranet.com>

The Status register in the PCI config space has some read-only bits.
Any writes to those bits should be masked out.

Signed-off-by: Amit Shah <amit.shah@qumranet.com>
---
 qemu/hw/pci.c |   11 +++++++++++
 qemu/hw/pci.h |   15 +++++++++++++++
 2 files changed, 26 insertions(+), 0 deletions(-)

diff --git a/qemu/hw/pci.c b/qemu/hw/pci.c
index a23a466..6916f4a 100644
--- a/qemu/hw/pci.c
+++ b/qemu/hw/pci.c
@@ -410,6 +410,7 @@ void pci_default_write_config(PCIDevice *d,
             case 0x0b:
             case 0x0e:
             case 0x10 ... 0x27: /* base */
+            case 0x2c ... 0x2f: /* read-only subsystem ID & vendor ID */
             case 0x30 ... 0x33: /* rom */
             case 0x3d:
                 can_write = 0;
@@ -431,6 +432,7 @@ void pci_default_write_config(PCIDevice *d,
             case 0x0a:
             case 0x0b:
             case 0x0e:
+            case 0x2c ... 0x2f: /* read-only subsystem ID & vendor ID */
             case 0x38 ... 0x3b: /* rom */
             case 0x3d:
                 can_write = 0;
@@ -442,6 +444,15 @@ void pci_default_write_config(PCIDevice *d,
             break;
         }
         if (can_write) {
+            /* Mask out writes to reserved bits in registers */
+            switch (addr) {
+            case 0x06:
+                val &= ~PCI_STATUS_RESERVED_MASK_LO;
+                break;
+            case 0x07:
+                val &= ~PCI_STATUS_RESERVED_MASK_HI;
+                break;
+            }
             d->config[addr] = val;
         }
         if (++addr > 0xff)
diff --git a/qemu/hw/pci.h b/qemu/hw/pci.h
index 60e4094..a0cbdd5 100644
--- a/qemu/hw/pci.h
+++ b/qemu/hw/pci.h
@@ -46,6 +46,21 @@ typedef struct PCIIORegion {
 #define PCI_MIN_GNT		0x3e	/* 8 bits */
 #define PCI_MAX_LAT		0x3f	/* 8 bits */
 
+/* Bits in the PCI Status Register (PCI 2.3 spec) */
+#define PCI_STATUS_RESERVED1	0x007
+#define PCI_STATUS_INT_STATUS	0x008
+#define PCI_STATUS_CAPABILITIES	0x010
+#define PCI_STATUS_66MHZ	0x020
+#define PCI_STATUS_RESERVED2	0x040
+#define PCI_STATUS_FAST_BACK	0x080
+#define PCI_STATUS_DEVSEL	0x600
+
+#define PCI_STATUS_RESERVED_MASK_LO (PCI_STATUS_RESERVED1 | \
+                PCI_STATUS_INT_STATUS | PCI_STATUS_CAPABILITIES | \
+                PCI_STATUS_66MHZ | PCI_STATUS_RESERVED2 | PCI_STATUS_FAST_BACK)
+
+#define PCI_STATUS_RESERVED_MASK_HI (PCI_STATUS_DEVSEL >> 8)
+
 struct PCIDevice {
     /* PCI config space */
     uint8_t config[256];
-- 
1.5.5.1

  reply	other threads:[~2008-05-26 10:37 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-26 10:36 [Qemu-devel] PCI: Add subsystem vendor IDs and mask writes to RO bits Amit Shah
2008-05-26 10:36 ` [Qemu-devel] [PATCH 01/14] QEMU: Fill in PCI subsystem vendor id for acpi Amit Shah
2008-05-26 10:36   ` Amit Shah [this message]
2008-05-26 10:36     ` [Qemu-devel] [PATCH 02/14] QEMU: Fill in PCI subsystem vendor id for cirrus_vga Amit Shah
2008-05-26 10:36       ` [Qemu-devel] [PATCH 2/2] QEMU: Mask writes to RO bits in the command reg of PCI config space Amit Shah
2008-05-26 10:36         ` [Qemu-devel] [PATCH 03/14] QEMU: Fill in PCI subsystem vendor id for e1000 Amit Shah
2008-05-26 10:36           ` [Qemu-devel] [PATCH 04/14] QEMU: Fill in PCI subsystem vendor id for eepro100 Amit Shah
2008-05-26 10:36             ` [Qemu-devel] [PATCH 05/14] QEMU: Fill in PCI subsystem vendor id for ide Amit Shah
2008-05-26 10:36               ` [Qemu-devel] [PATCH 06/14] QEMU: Fill in PCI subsystem vendor id for LSI Amit Shah
2008-05-26 10:36                 ` [Qemu-devel] [PATCH 07/14] QEMU: Fill in PCI subsystem vendor id for ne2000 Amit Shah
2008-05-26 10:36                   ` [Qemu-devel] [PATCH 08/14] QEMU: Fill in PCI subsystem vendor id for pcnet Amit Shah
2008-05-26 10:36                     ` [Qemu-devel] [PATCH 09/14] QEMU: Fill in PCI subsystem vendor id for piix_pci Amit Shah
2008-05-26 10:36                       ` [Qemu-devel] [PATCH 10/14] QEMU: Fill in PCI subsystem vendor id for rtl8139 Amit Shah
2008-05-26 10:36                         ` [Qemu-devel] [PATCH 11/14] QEMU: Fill in PCI subsystem vendor id for usb-ohci Amit Shah
2008-05-26 10:36                           ` [Qemu-devel] [PATCH 12/14] QEMU: Fill in PCI subsystem vendor id for usb-uhci Amit Shah
2008-05-26 10:36                             ` [Qemu-devel] [PATCH 13/14] QEMU: Fill in PCI subsystem vendor id for versatile_pci Amit Shah
2008-05-26 10:36                               ` [Qemu-devel] [PATCH 14/14] QEMU: Fill in PCI subsystem vendor id for vga Amit Shah
2008-05-26 18:36           ` [Qemu-devel] [PATCH 03/14] QEMU: Fill in PCI subsystem vendor id for e1000 M. Warner Losh
2008-05-27 15:01             ` Amit Shah
2008-05-26 18:33     ` [Qemu-devel] [PATCH 1/2] QEMU: Mask writes to RO bits in the status reg of PCI config space M. Warner Losh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1211798213-4187-3-git-send-email-amit.shah@qumranet.com \
    --to=amit.shah@qumranet.com \
    --cc=kvm@vger.kernel.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).