From: Dmitry Baryshkov <dbaryshkov@gmail.com>
To: qemu-devel@nongnu.org
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Subject: [Qemu-devel] [PATCH] tosa: basic lcd support
Date: Sun, 2 Nov 2008 16:16:27 +0300 [thread overview]
Message-ID: <1225631790-15735-4-git-send-email-dbaryshkov@gmail.com> (raw)
In-Reply-To: <1225631790-15735-3-git-send-email-dbaryshkov@gmail.com>
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
---
hw/tosa.c | 74 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 74 insertions(+), 0 deletions(-)
diff --git a/hw/tosa.c b/hw/tosa.c
index e629044..cb0e1da 100644
--- a/hw/tosa.c
+++ b/hw/tosa.c
@@ -17,6 +17,7 @@
#include "pcmcia.h"
#include "block.h"
#include "boards.h"
+#include "i2c.h"
#define TOSA_RAM 0x04000000
#define TOSA_ROM 0x00800000
@@ -38,6 +39,11 @@
#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2)
#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7)
+#define DAC_BASE 0x4e
+#define DAC_CH1 0
+#define DAC_CH2 1
+
+
static void tosa_microdrive_attach(struct pxa2xx_state_s *cpu)
{
struct pcmcia_card_s *md;
@@ -104,6 +110,72 @@ static void tosa_gpio_setup(struct pxa2xx_state_s *cpu,
scoop_gpio_out_set(scp1, TOSA_GPIO_WLAN_LED, outsignals[3]);
}
+static uint32_t tosa_ssp_read(void *opaque) {
+ return 0;
+}
+
+static void tosa_ssp_write(void *opaque, uint32_t value)
+{
+ fprintf(stderr, "TG: %d %02x\n", value >> 5, value & 0x1f);
+}
+
+struct tosa_dac_i2c {
+ i2c_slave i2c;
+ int len;
+ char buf[3];
+};
+
+static int tosa_dac_send(i2c_slave *i2c, uint8_t data)
+{
+ struct tosa_dac_i2c *s = (struct tosa_dac_i2c *)i2c;
+ s->buf[s->len] = data;
+ if (s->len ++ > 2) {
+#ifdef VERBOSE
+ fprintf(stderr, "%s: message too long (%i bytes)\n", __FUNCTION__, s->len);
+#endif
+ return 1;
+ }
+
+ if (s->len == 2) {
+ fprintf(stderr, "dac: channel %d value 0x%02x\n",
+ s->buf[0], s->buf[1]);
+ }
+
+ return 0;
+}
+
+static void tosa_dac_event(i2c_slave *i2c, enum i2c_event event)
+{
+ struct tosa_dac_i2c *s = (struct tosa_dac_i2c *)i2c;
+ s->len = 0;
+ switch (event) {
+ case I2C_START_SEND:
+ break;
+ case I2C_FINISH:
+#ifdef VERBOSE
+ if (s->len < 2)
+ printf("%s: message too short (%i bytes)\n", __FUNCTION__, s->len);
+ if (s->len > 2)
+ printf("%s: message too long\n", __FUNCTION__);
+#endif
+ break;
+ default:
+ break;
+ }
+}
+
+static void tosa_tg_init(struct pxa2xx_state_s *cpu)
+{
+ struct i2c_bus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
+ struct i2c_slave *dac = i2c_slave_init(bus, 0, sizeof(struct tosa_dac_i2c));
+ dac->send = tosa_dac_send;
+ dac->event = tosa_dac_event;
+ i2c_set_slave_address(dac, DAC_BASE);
+ pxa2xx_ssp_attach(cpu->ssp[1], tosa_ssp_read,
+ tosa_ssp_write, cpu);
+}
+
+
static struct arm_boot_info tosa_binfo = {
.loader_start = PXA2XX_SDRAM_BASE,
.ram_size = 0x04000000,
@@ -140,6 +212,8 @@ static void tosa_init(ram_addr_t ram_size, int vga_ram_size,
tosa_microdrive_attach(cpu);
+ tosa_tg_init(cpu);
+
/* Setup initial (reset) machine state */
cpu->env->regs[15] = tosa_binfo.loader_start;
--
1.5.6.5
next prev parent reply other threads:[~2008-11-02 13:16 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-02 13:16 [Qemu-devel] [PATCH] scoop: GPRR reports the state of GPIO lines Dmitry Baryshkov
2008-11-02 13:16 ` [Qemu-devel] [PATCH] tc6393xb: initial support for nand Dmitry Baryshkov
2008-11-02 13:16 ` [Qemu-devel] [PATCH] tosa: support leds Dmitry Baryshkov
2008-11-02 13:16 ` Dmitry Baryshkov [this message]
2008-11-02 13:16 ` [Qemu-devel] [PATCH] tosa: provide correct IRQ to tc6393xb init Dmitry Baryshkov
2008-11-02 13:16 ` [Qemu-devel] [PATCH] tosa: disable pxafb as it's not used on tosa Dmitry Baryshkov
2008-11-02 13:16 ` [Qemu-devel] [PATCH] tc6393xb: non-accelerated FB support Dmitry Baryshkov
2008-11-02 16:31 ` andrzej zaborowski
2008-11-02 17:36 ` Dmitry Baryshkov
2008-11-02 19:40 ` Dmitry Baryshkov
2008-11-03 23:46 ` andrzej zaborowski
2008-11-04 3:14 ` Dmitry
2008-11-02 16:09 ` [Qemu-devel] [PATCH] tosa: basic lcd support andrzej zaborowski
2008-11-02 17:19 ` Dmitry Baryshkov
2008-11-04 9:14 ` andrzej zaborowski
2008-11-02 14:45 ` [Qemu-devel] Re: [PATCH] scoop: GPRR reports the state of GPIO lines Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1225631790-15735-4-git-send-email-dbaryshkov@gmail.com \
--to=dbaryshkov@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).