From: Beth Kon <eak@us.ibm.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 2/2] Add HPET emulation to qemu - Bochs BIOS patch (v5)
Date: Wed, 19 Nov 2008 10:56:41 -0500 [thread overview]
Message-ID: <1227110201.8802.6.camel@beth-laptop> (raw)
[-- Attachment #1: Type: text/plain, Size: 157 bytes --]
This has not changed, just resending as part of the series.
--
Elizabeth Kon (Beth)
IBM Linux Technology Center
Open Hypervisor Team
email: eak@us.ibm.com
[-- Attachment #2: qemu_hpetv4_bochs.patch --]
[-- Type: text/x-patch, Size: 5665 bytes --]
Index: bochs-2.3.7/bios/acpi-dsdt.dsl
===================================================================
--- bochs-2.3.7.orig/bios/acpi-dsdt.dsl 2008-10-15 12:39:14.000000000 -0500
+++ bochs-2.3.7/bios/acpi-dsdt.dsl 2008-10-28 07:58:40.000000000 -0500
@@ -159,6 +159,26 @@
Return (MEMP)
}
}
+#ifdef BX_QEMU
+ Device(HPET) {
+ Name(_HID, EISAID("PNP0103"))
+ Name(_UID, 0)
+ Method (_STA, 0, NotSerialized) {
+ Return(0x0F)
+ }
+ Name(_CRS, ResourceTemplate() {
+ DWordMemory(
+ ResourceConsumer, PosDecode, MinFixed, MaxFixed,
+ NonCacheable, ReadWrite,
+ 0x00000000,
+ 0xFED00000,
+ 0xFED003FF,
+ 0x00000000,
+ 0x00000400 /* 1K memory: FED00000 - FED003FF */
+ )
+ })
+ }
+#endif
}
Scope(\_SB.PCI0) {
Index: bochs-2.3.7/bios/rombios32.c
===================================================================
--- bochs-2.3.7.orig/bios/rombios32.c 2008-10-15 12:39:36.000000000 -0500
+++ bochs-2.3.7/bios/rombios32.c 2008-11-12 14:41:41.000000000 -0600
@@ -1087,7 +1087,11 @@
struct rsdt_descriptor_rev1
{
ACPI_TABLE_HEADER_DEF /* ACPI common table header */
+#ifdef BX_QEMU
+ uint32_t table_offset_entry [4]; /* Array of pointers to other */
+#else
uint32_t table_offset_entry [3]; /* Array of pointers to other */
+#endif
/* ACPI tables */
};
@@ -1227,6 +1231,32 @@
#endif
};
+#ifdef BX_QEMU
+/*
+ * * ACPI 2.0 Generic Address Space definition.
+ * */
+struct acpi_20_generic_address {
+ uint8_t address_space_id;
+ uint8_t register_bit_width;
+ uint8_t register_bit_offset;
+ uint8_t reserved;
+ uint64_t address;
+};
+
+/*
+ * * HPET Description Table
+ * */
+struct acpi_20_hpet {
+ ACPI_TABLE_HEADER_DEF /* ACPI common table header */
+ uint32_t timer_block_id;
+ struct acpi_20_generic_address addr;
+ uint8_t hpet_number;
+ uint16_t min_tick;
+ uint8_t page_protect;
+};
+#define ACPI_HPET_ADDRESS 0xFED00000UL
+#endif
+
struct madt_io_apic
{
APIC_HEADER_DEF
@@ -1237,6 +1267,17 @@
* lines start */
};
+#ifdef BX_QEMU
+struct madt_int_override
+{
+ APIC_HEADER_DEF
+ uint8_t bus; /* Identifies ISA Bus */
+ uint8_t source; /* Bus-relative interrupt source */
+ uint32_t gsi; /* GSI that source will signal */
+ uint16_t flags; /* MPS INTI flags */
+};
+#endif
+
#include "acpi-dsdt.hex"
static inline uint16_t cpu_to_le16(uint16_t x)
@@ -1342,6 +1383,10 @@
struct facs_descriptor_rev1 *facs;
struct multiple_apic_table *madt;
uint8_t *dsdt, *ssdt;
+#ifdef BX_QEMU
+ struct acpi_20_hpet *hpet;
+ uint32_t hpet_addr;
+#endif
uint32_t base_addr, rsdt_addr, fadt_addr, addr, facs_addr, dsdt_addr, ssdt_addr;
uint32_t acpi_tables_size, madt_addr, madt_size;
int i;
@@ -1384,10 +1429,21 @@
madt_addr = addr;
madt_size = sizeof(*madt) +
sizeof(struct madt_processor_apic) * smp_cpus +
+#ifdef BX_QEMU
+ sizeof(struct madt_io_apic) + sizeof(struct madt_int_override);
+#else
sizeof(struct madt_io_apic);
+#endif
madt = (void *)(addr);
addr += madt_size;
+#ifdef BX_QEMU
+ addr = (addr + 7) & ~7;
+ hpet_addr = addr;
+ hpet = (void *)(addr);
+ addr += sizeof(*hpet);
+#endif
+
acpi_tables_size = addr - base_addr;
BX_INFO("ACPI tables: RSDP addr=0x%08lx ACPI DATA addr=0x%08lx size=0x%x\n",
@@ -1410,6 +1466,9 @@
rsdt->table_offset_entry[0] = cpu_to_le32(fadt_addr);
rsdt->table_offset_entry[1] = cpu_to_le32(madt_addr);
rsdt->table_offset_entry[2] = cpu_to_le32(ssdt_addr);
+#ifdef BX_QEMU
+ rsdt->table_offset_entry[3] = cpu_to_le32(hpet_addr);
+#endif
acpi_build_table_header((struct acpi_table_header *)rsdt,
"RSDT", sizeof(*rsdt), 1);
@@ -1448,6 +1507,9 @@
{
struct madt_processor_apic *apic;
struct madt_io_apic *io_apic;
+#ifdef BX_QEMU
+ struct madt_int_override *int_override;
+#endif
memset(madt, 0, madt_size);
madt->local_apic_address = cpu_to_le32(0xfee00000);
@@ -1467,10 +1529,34 @@
io_apic->io_apic_id = smp_cpus;
io_apic->address = cpu_to_le32(0xfec00000);
io_apic->interrupt = cpu_to_le32(0);
+#ifdef BX_QEMU
+ io_apic++;
+
+ int_override = (void *)io_apic;
+ int_override->type = APIC_XRUPT_OVERRIDE;
+ int_override->length = sizeof(*int_override);
+ int_override->bus = cpu_to_le32(0);
+ int_override->source = cpu_to_le32(0);
+ int_override->gsi = cpu_to_le32(2);
+ int_override->flags = cpu_to_le32(0);
+#endif
acpi_build_table_header((struct acpi_table_header *)madt,
"APIC", madt_size, 1);
}
+
+#ifdef BX_QEMU
+ /* HPET */
+ memset(hpet, 0, sizeof(*hpet));
+ /* Note timer_block_id value must be kept in sync with value advertised by
+ * emulated hpet
+ */
+ hpet->timer_block_id = cpu_to_le32(0x8086a201);
+ hpet->addr.address = cpu_to_le32(ACPI_HPET_ADDRESS);
+ acpi_build_table_header((struct acpi_table_header *)hpet,
+ "HPET", sizeof(*hpet), 1);
+#endif
+
}
/* SMBIOS entry point -- must be written to a 16-bit aligned address
reply other threads:[~2008-11-19 15:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1227110201.8802.6.camel@beth-laptop \
--to=eak@us.ibm.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).