From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: qemu-devel@nongnu.org
Cc: Takashi Yoshii <yoshii.takashi@renesas.com>,
Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Subject: [Qemu-devel] [PATCH] SH7750/51: add register BCR3, NCR4, PCR, RTCOR, RTCNT, RTCSR, SDMR2, SDMR3 and fix BCR2 support
Date: Fri, 5 Dec 2008 12:49:42 +0100 [thread overview]
Message-ID: <1228477782-19842-1-git-send-email-plagnioj@jcrosoft.com> (raw)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Takashi Yoshii <yoshii.takashi@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
---
hw/sh7750.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++--
hw/sh7750_regnames.c | 2 +
hw/sh7750_regs.h | 11 +++++++++
3 files changed, 69 insertions(+), 3 deletions(-)
diff --git a/hw/sh7750.c b/hw/sh7750.c
index 4ae90b1..78843f3 100644
--- a/hw/sh7750.c
+++ b/hw/sh7750.c
@@ -42,8 +42,12 @@ typedef struct SH7750State {
uint32_t periph_freq;
/* SDRAM controller */
uint32_t bcr1;
- uint32_t bcr2;
+ uint16_t bcr2;
+ uint16_t bcr3;
+ uint32_t bcr4;
uint16_t rfcr;
+ /* PCMCIA controller */
+ uint16_t pcr;
/* IO ports */
uint16_t gpioic;
uint32_t pctra;
@@ -67,7 +71,10 @@ typedef struct SH7750State {
struct intc_desc intc;
} SH7750State;
-
+static int inline is_sh7751r_cpu(SH7750State * s)
+{
+ return (s->cpu->id & (SH_CPU_SH7751R));
+}
/**********************************************************************
I/O ports
**********************************************************************/
@@ -212,8 +219,17 @@ static uint32_t sh7750_mem_readw(void *opaque, target_phys_addr_t addr)
switch (addr) {
case SH7750_BCR2_A7:
return s->bcr2;
+ case SH7750_BCR3_A7:
+ if(is_sh7751r_cpu(s)) {
+ return s->bcr3;
+ } else {
+ error_access("word read", addr);
+ assert(0);
+ }
case SH7750_FRQCR_A7:
return 0;
+ case SH7750_PCR_A7:
+ return s->pcr;
case SH7750_RFCR_A7:
fprintf(stderr,
"Read access to refresh count register, incrementing\n");
@@ -222,6 +238,11 @@ static uint32_t sh7750_mem_readw(void *opaque, target_phys_addr_t addr)
return porta_lines(s);
case SH7750_PDTRB_A7:
return portb_lines(s);
+ case SH7750_RTCOR_A7:
+ case SH7750_RTCNT_A7:
+ case SH7750_RTCSR_A7:
+ ignore_access("word read", addr);
+ return 0;
case 0x1fd00000:
return s->icr;
default:
@@ -238,6 +259,12 @@ static uint32_t sh7750_mem_readl(void *opaque, target_phys_addr_t addr)
case SH7750_BCR1_A7:
return s->bcr1;
case SH7750_BCR4_A7:
+ if(is_sh7751r_cpu(s)) {
+ return s->bcr4;
+ } else {
+ error_access("long read", addr);
+ assert(0);
+ }
case SH7750_WCR1_A7:
case SH7750_WCR2_A7:
case SH7750_WCR3_A7:
@@ -274,9 +301,17 @@ static uint32_t sh7750_mem_readl(void *opaque, target_phys_addr_t addr)
}
}
+#define is_in_sdrmx(a, x) (a >= SH7750_SDMR ## x ## _A7 \
+ && a <= (SH7750_SDMR ## x ## _A7 + SH7750_SDMR ## x ## _REGNB))
static void sh7750_mem_writeb(void *opaque, target_phys_addr_t addr,
uint32_t mem_value)
{
+
+ if (is_in_sdrmx(addr, 2) || is_in_sdrmx(addr, 3)) {
+ ignore_access("word write", addr);
+ return;
+ }
+
switch (addr) {
/* PRECHARGE ? XXXXX */
case SH7750_PRECHARGE0_A7:
@@ -301,8 +336,18 @@ static void sh7750_mem_writew(void *opaque, target_phys_addr_t addr,
s->bcr2 = mem_value;
return;
case SH7750_BCR3_A7:
- case SH7750_RTCOR_A7:
+ if(is_sh7751r_cpu(s)) {
+ s->bcr3 = mem_value;
+ return;
+ } else {
+ error_access("word write", addr);
+ assert(0);
+ }
+ case SH7750_PCR_A7:
+ s->pcr = mem_value;
+ return;
case SH7750_RTCNT_A7:
+ case SH7750_RTCOR_A7:
case SH7750_RTCSR_A7:
ignore_access("word write", addr);
return;
@@ -349,6 +394,14 @@ static void sh7750_mem_writel(void *opaque, target_phys_addr_t addr,
s->bcr1 = mem_value;
return;
case SH7750_BCR4_A7:
+ if(is_sh7751r_cpu(s)) {
+ s->bcr4 = mem_value;
+ return;
+ } else {
+ error_access("long write", addr);
+ assert(0);
+ }
+ return;
case SH7750_WCR1_A7:
case SH7750_WCR2_A7:
case SH7750_WCR3_A7:
diff --git a/hw/sh7750_regnames.c b/hw/sh7750_regnames.c
index 51283c9..77993c1 100644
--- a/hw/sh7750_regnames.c
+++ b/hw/sh7750_regnames.c
@@ -79,6 +79,8 @@ static regname_t regnames[] = {
REGNAME(SH7750_ICR_A7)
REGNAME(SH7750_BCR3_A7)
REGNAME(SH7750_BCR4_A7)
+ REGNAME(SH7750_SDMR2_A7)
+ REGNAME(SH7750_SDMR3_A7)
REGNAME(SH7750_PRECHARGE0_A7)
REGNAME(SH7750_PRECHARGE1_A7) {(uint32_t) - 1, 0}
};
diff --git a/hw/sh7750_regs.h b/hw/sh7750_regs.h
index c8fb328..4ed471b 100644
--- a/hw/sh7750_regs.h
+++ b/hw/sh7750_regs.h
@@ -979,6 +979,17 @@
#define SH7750_RFCR_KEY 0xA400 /* RFCR write key */
+/* Synchronous DRAM mode registers - SDMR */
+#define SH7750_SDMR2_REGOFS 0x900000 /* base offset */
+#define SH7750_SDMR2_REGNB 0x0FFC /* nb of register */
+#define SH7750_SDMR2 SH7750_P4_REG32(SH7750_SDMR2_REGOFS)
+#define SH7750_SDMR2_A7 SH7750_A7_REG32(SH7750_SDMR2_REGOFS)
+
+#define SH7750_SDMR3_REGOFS 0x940000 /* offset */
+#define SH7750_SDMR3_REGNB 0x0FFC /* nb of register */
+#define SH7750_SDMR3 SH7750_P4_REG32(SH7750_SDMR3_REGOFS)
+#define SH7750_SDMR3_A7 SH7750_A7_REG32(SH7750_SDMR3_REGOFS)
+
/*
* Direct Memory Access Controller (DMAC)
*/
--
1.5.6.5
next reply other threads:[~2008-12-05 12:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-05 11:49 Jean-Christophe PLAGNIOL-VILLARD [this message]
2008-12-14 11:37 ` [Qemu-devel] [PATCH] SH7750/51: add register BCR3, NCR4, PCR, RTCOR, RTCNT, RTCSR, SDMR2, SDMR3 and fix BCR2 support Shin-ichiro KAWASAKI
2008-12-14 14:51 ` Jean-Christophe PLAGNIOL-VILLARD
2008-12-14 15:36 ` Shin-ichiro KAWASAKI
2008-12-14 16:37 ` Jean-Christophe PLAGNIOL-VILLARD
2008-12-14 17:24 ` Thiemo Seufer
2008-12-15 0:37 ` Shin-ichiro KAWASAKI
2008-12-15 1:08 ` Thiemo Seufer
2008-12-14 17:28 ` Aurelien Jarno
2008-12-17 9:18 ` [Qemu-devel] [PATCH V2] SH7750/51: add register BCR3, BCR4, " Jean-Christophe PLAGNIOL-VILLARD
2008-12-18 15:51 ` Aurelien Jarno
2008-12-18 21:49 ` [Qemu-devel] [PATCH V3] " Jean-Christophe PLAGNIOL-VILLARD
2008-12-18 23:33 ` [Qemu-devel] [PATCH V4] " Jean-Christophe PLAGNIOL-VILLARD
2009-02-07 15:19 ` Aurelien Jarno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1228477782-19842-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=iwamatsu.nobuhiro@renesas.com \
--cc=qemu-devel@nongnu.org \
--cc=yoshii.takashi@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).