qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: qemu-devel@nongnu.org
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Subject: [Qemu-devel] [PATCH V2] SH7750/51: add register BCR3, BCR4, PCR, RTCOR, RTCNT, RTCSR, SDMR2, SDMR3 and fix BCR2 support
Date: Wed, 17 Dec 2008 10:18:52 +0100	[thread overview]
Message-ID: <1229505532-29906-1-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20081214172849.GI22069@hall.aurel32.net>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 hw/sh7750.c            |   65 ++++++++++++++++++++++++++++++++++++++++-------
 hw/sh7750_regnames.c   |    4 +-
 hw/sh7750_regs.h       |   13 ++++++++-
 target-sh4/cpu.h       |    1 +
 target-sh4/translate.c |    2 +
 5 files changed, 71 insertions(+), 14 deletions(-)

diff --git a/hw/sh7750.c b/hw/sh7750.c
index 4d1a806..cee3a41 100644
--- a/hw/sh7750.c
+++ b/hw/sh7750.c
@@ -42,8 +42,12 @@ typedef struct SH7750State {
     uint32_t periph_freq;
     /* SDRAM controller */
     uint32_t bcr1;
-    uint32_t bcr2;
+    uint16_t bcr2;
+    uint16_t bcr3;
+    uint32_t bcr4;
     uint16_t rfcr;
+    /* PCMCIA controller */
+    uint16_t pcr;
     /* IO ports */
     uint16_t gpioic;
     uint32_t pctra;
@@ -66,7 +70,10 @@ typedef struct SH7750State {
     struct intc_desc intc;
 } SH7750State;
 
-
+static int inline has_bcr3_and_bcr4(SH7750State * s)
+{
+	return (s->cpu->features & SH_FEATURE_BCR3_AND_BCR4);
+}
 /**********************************************************************
  I/O ports
 **********************************************************************/
@@ -211,8 +218,17 @@ static uint32_t sh7750_mem_readw(void *opaque, target_phys_addr_t addr)
     switch (addr) {
     case SH7750_BCR2_A7:
 	return s->bcr2;
+    case SH7750_BCR3_A7:
+	if(has_bcr3_and_bcr4(s)) {
+	    return s->bcr3;
+	} else {
+	    error_access("word read", addr);
+	    assert(0);
+	}
     case SH7750_FRQCR_A7:
 	return 0;
+    case SH7750_PCR_A7:
+	return s->pcr;
     case SH7750_RFCR_A7:
 	fprintf(stderr,
 		"Read access to refresh count register, incrementing\n");
@@ -221,6 +237,11 @@ static uint32_t sh7750_mem_readw(void *opaque, target_phys_addr_t addr)
 	return porta_lines(s);
     case SH7750_PDTRB_A7:
 	return portb_lines(s);
+    case SH7750_RTCOR_A7:
+    case SH7750_RTCNT_A7:
+    case SH7750_RTCSR_A7:
+	ignore_access("word read", addr);
+	return 0;
     default:
 	error_access("word read", addr);
 	assert(0);
@@ -235,6 +256,12 @@ static uint32_t sh7750_mem_readl(void *opaque, target_phys_addr_t addr)
     case SH7750_BCR1_A7:
 	return s->bcr1;
     case SH7750_BCR4_A7:
+	if(has_bcr3_and_bcr4(s)) {
+	    return s->bcr4;
+	} else {
+	    error_access("long read", addr);
+	    assert(0);
+	}
     case SH7750_WCR1_A7:
     case SH7750_WCR2_A7:
     case SH7750_WCR3_A7:
@@ -271,19 +298,19 @@ static uint32_t sh7750_mem_readl(void *opaque, target_phys_addr_t addr)
     }
 }
 
+#define is_in_sdrmx(a, x) (a >= SH7750_SDMR ## x ## _A7 \
+			&& a <= (SH7750_SDMR ## x ## _A7 + SH7750_SDMR ## x ## _REGNB))
 static void sh7750_mem_writeb(void *opaque, target_phys_addr_t addr,
 			      uint32_t mem_value)
 {
-    switch (addr) {
-	/* PRECHARGE ? XXXXX */
-    case SH7750_PRECHARGE0_A7:
-    case SH7750_PRECHARGE1_A7:
+
+    if (is_in_sdrmx(addr, 2) || is_in_sdrmx(addr, 3)) {
 	ignore_access("byte write", addr);
 	return;
-    default:
-	error_access("byte write", addr);
-	assert(0);
     }
+
+    error_access("byte write", addr);
+    assert(0);
 }
 
 static void sh7750_mem_writew(void *opaque, target_phys_addr_t addr,
@@ -298,8 +325,18 @@ static void sh7750_mem_writew(void *opaque, target_phys_addr_t addr,
         s->bcr2 = mem_value;
         return;
     case SH7750_BCR3_A7:
-    case SH7750_RTCOR_A7:
+	if(has_bcr3_and_bcr4(s)) {
+	    s->bcr3 = mem_value;
+	    return;
+	} else {
+	    error_access("word write", addr);
+	    assert(0);
+	}
+    case SH7750_PCR_A7:
+	s->pcr = mem_value;
+	return;
     case SH7750_RTCNT_A7:
+    case SH7750_RTCOR_A7:
     case SH7750_RTCSR_A7:
 	ignore_access("word write", addr);
 	return;
@@ -343,6 +380,14 @@ static void sh7750_mem_writel(void *opaque, target_phys_addr_t addr,
         s->bcr1 = mem_value;
         return;
     case SH7750_BCR4_A7:
+	if(has_bcr3_and_bcr4(s)) {
+	    s->bcr4 = mem_value;
+	    return;
+	} else {
+	    error_access("long write", addr);
+	    assert(0);
+	}
+        return;
     case SH7750_WCR1_A7:
     case SH7750_WCR2_A7:
     case SH7750_WCR3_A7:
diff --git a/hw/sh7750_regnames.c b/hw/sh7750_regnames.c
index 51283c9..4928151 100644
--- a/hw/sh7750_regnames.c
+++ b/hw/sh7750_regnames.c
@@ -79,8 +79,8 @@ static regname_t regnames[] = {
 	REGNAME(SH7750_ICR_A7)
 	REGNAME(SH7750_BCR3_A7)
 	REGNAME(SH7750_BCR4_A7)
-	REGNAME(SH7750_PRECHARGE0_A7)
-    REGNAME(SH7750_PRECHARGE1_A7) {(uint32_t) - 1, 0}
+	REGNAME(SH7750_SDMR2_A7)
+	REGNAME(SH7750_SDMR3_A7) {(uint32_t) - 1, 0}
 };
 
 const char *regname(uint32_t addr)
diff --git a/hw/sh7750_regs.h b/hw/sh7750_regs.h
index c8fb328..5a23a2c 100644
--- a/hw/sh7750_regs.h
+++ b/hw/sh7750_regs.h
@@ -979,6 +979,17 @@
 
 #define SH7750_RFCR_KEY       0xA400	/* RFCR write key */
 
+/* Synchronous DRAM mode registers - SDMR */
+#define SH7750_SDMR2_REGOFS   0x900000	/* base offset */
+#define SH7750_SDMR2_REGNB    0x0FFC	/* nb of register */
+#define SH7750_SDMR2          SH7750_P4_REG32(SH7750_SDMR2_REGOFS)
+#define SH7750_SDMR2_A7       SH7750_A7_REG32(SH7750_SDMR2_REGOFS)
+
+#define SH7750_SDMR3_REGOFS   0x940000	/* offset */
+#define SH7750_SDMR3_REGNB    0x0FFC	/* nb of register */
+#define SH7750_SDMR3          SH7750_P4_REG32(SH7750_SDMR3_REGOFS)
+#define SH7750_SDMR3_A7       SH7750_A7_REG32(SH7750_SDMR3_REGOFS)
+
 /*
  * Direct Memory Access Controller (DMAC)
  */
@@ -1262,7 +1273,5 @@
  */
 #define SH7750_BCR3_A7       0x1f800050
 #define SH7750_BCR4_A7       0x1e0a00f0
-#define SH7750_PRECHARGE0_A7 0x1f900088
-#define SH7750_PRECHARGE1_A7 0x1f940088
 
 #endif
diff --git a/target-sh4/cpu.h b/target-sh4/cpu.h
index 226417f..da6b81c 100644
--- a/target-sh4/cpu.h
+++ b/target-sh4/cpu.h
@@ -95,6 +95,7 @@ typedef struct tlb_t {
 
 enum sh_features {
     SH_FEATURE_SH4A = 1,
+    SH_FEATURE_BCR3_AND_BCR4 = 2,
 };
 
 typedef struct CPUSH4State {
diff --git a/target-sh4/translate.c b/target-sh4/translate.c
index 2d3981c..ed4a26b 100644
--- a/target-sh4/translate.c
+++ b/target-sh4/translate.c
@@ -217,12 +217,14 @@ static sh4_def_t sh4_defs[] = {
 	.pvr = 0x00050000,
 	.prr = 0x00000100,
 	.cvr = 0x00110000,
+	.features = SH_FEATURE_BCR3_AND_BCR4,
     }, {
 	.name = "SH7751R",
 	.id = SH_CPU_SH7751R,
 	.pvr = 0x04050005,
 	.prr = 0x00000113,
 	.cvr = 0x00110000,	/* Neutered caches, should be 0x20480000 */
+	.features = SH_FEATURE_BCR3_AND_BCR4,
     }, {
 	.name = "SH7785",
 	.id = SH_CPU_SH7785,
-- 
1.5.6.5

  reply	other threads:[~2008-12-17  9:21 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-05 11:49 [Qemu-devel] [PATCH] SH7750/51: add register BCR3, NCR4, PCR, RTCOR, RTCNT, RTCSR, SDMR2, SDMR3 and fix BCR2 support Jean-Christophe PLAGNIOL-VILLARD
2008-12-14 11:37 ` Shin-ichiro KAWASAKI
2008-12-14 14:51   ` Jean-Christophe PLAGNIOL-VILLARD
2008-12-14 15:36     ` Shin-ichiro KAWASAKI
2008-12-14 16:37       ` Jean-Christophe PLAGNIOL-VILLARD
2008-12-14 17:24         ` Thiemo Seufer
2008-12-15  0:37           ` Shin-ichiro KAWASAKI
2008-12-15  1:08             ` Thiemo Seufer
2008-12-14 17:28       ` Aurelien Jarno
2008-12-17  9:18         ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2008-12-18 15:51           ` [Qemu-devel] [PATCH V2] SH7750/51: add register BCR3, BCR4, " Aurelien Jarno
2008-12-18 21:49             ` [Qemu-devel] [PATCH V3] " Jean-Christophe PLAGNIOL-VILLARD
2008-12-18 23:33               ` [Qemu-devel] [PATCH V4] " Jean-Christophe PLAGNIOL-VILLARD
2009-02-07 15:19                 ` Aurelien Jarno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1229505532-29906-1-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).