From: Liu Yu <yu.liu@freescale.com>
To: qemu-devel@nongnu.org
Cc: Liu Yu <yu.liu@freescale.com>,
hollisb@us.ibm.com, kvm-ppc@vger.kernel.org
Subject: [Qemu-devel] [PATCH 3/6] kvm/powerpc: Add irq support for E500 core
Date: Thu, 22 Jan 2009 18:14:13 +0800 [thread overview]
Message-ID: <1232619256-18807-4-git-send-email-yu.liu@freescale.com> (raw)
In-Reply-To: <1232619256-18807-3-git-send-email-yu.liu@freescale.com>
Signed-off-by: Liu Yu <yu.liu@freescale.com>
---
hw/ppc.c | 89 +++++++++++++++++++++++++++++++++++++++++++
hw/ppc.h | 1 +
target-ppc/cpu.h | 10 +++++
target-ppc/translate_init.c | 6 ++-
4 files changed, 104 insertions(+), 2 deletions(-)
diff --git a/hw/ppc.c b/hw/ppc.c
index 05e787f..7a44951 100644
--- a/hw/ppc.c
+++ b/hw/ppc.c
@@ -314,6 +314,95 @@ void ppc40x_irq_init (CPUState *env)
env, PPC40x_INPUT_NB);
}
+/* PowerPC E500 internal IRQ controller */
+static void ppce500_set_irq (void *opaque, int pin, int level)
+{
+ CPUState *env = opaque;
+ int cur_level;
+
+#if defined(PPC_DEBUG_IRQ)
+ if (loglevel & CPU_LOG_INT) {
+ fprintf(logfile, "%s: env %p pin %d level %d\n", __func__,
+ env, pin, level);
+ }
+#endif
+ cur_level = (env->irq_input_state >> pin) & 1;
+ /* Don't generate spurious events */
+ if ((cur_level == 1 && level == 0) || (cur_level == 0 && level != 0)) {
+ switch (pin) {
+ case PPCE500_INPUT_MCK:
+ if (level) {
+#if defined(PPC_DEBUG_IRQ)
+ if (loglevel & CPU_LOG_INT) {
+ fprintf(logfile, "%s: reset the PowerPC system\n",
+ __func__);
+ }
+#endif
+ fprintf(stderr,"PowerPC E500 reset core\n");
+ qemu_system_reset_request();
+ }
+ break;
+ case PPCE500_INPUT_RESET_CORE:
+ if (level) {
+#if defined(PPC_DEBUG_IRQ)
+ if (loglevel & CPU_LOG_INT) {
+ fprintf(logfile, "%s: reset the PowerPC core\n", __func__);
+ }
+#endif
+ ppc_set_irq(env, PPC_INTERRUPT_MCK, level);
+ }
+ break;
+ case PPCE500_INPUT_CINT:
+ /* Level sensitive - active high */
+#if defined(PPC_DEBUG_IRQ)
+ if (loglevel & CPU_LOG_INT) {
+ fprintf(logfile, "%s: set the critical IRQ state to %d\n",
+ __func__, level);
+ }
+#endif
+ ppc_set_irq(env, PPC_INTERRUPT_CEXT, level);
+ break;
+ case PPCE500_INPUT_INT:
+ /* Level sensitive - active high */
+#if defined(PPC_DEBUG_IRQ)
+ if (loglevel & CPU_LOG_INT) {
+ fprintf(logfile, "%s: set the core IRQ state to %d\n",
+ __func__, level);
+ }
+#endif
+ ppc_set_irq(env, PPC_INTERRUPT_EXT, level);
+ break;
+ case PPCE500_INPUT_DEBUG:
+ /* Level sensitive - active high */
+#if defined(PPC_DEBUG_IRQ)
+ if (loglevel & CPU_LOG_INT) {
+ fprintf(logfile, "%s: set the debug pin state to %d\n",
+ __func__, level);
+ }
+#endif
+ ppc_set_irq(env, PPC_INTERRUPT_DEBUG, level);
+ break;
+ default:
+ /* Unknown pin - do nothing */
+#if defined(PPC_DEBUG_IRQ)
+ if (loglevel & CPU_LOG_INT) {
+ fprintf(logfile, "%s: unknown IRQ pin %d\n", __func__, pin);
+ }
+#endif
+ return;
+ }
+ if (level)
+ env->irq_input_state |= 1 << pin;
+ else
+ env->irq_input_state &= ~(1 << pin);
+ }
+}
+
+void ppce500_irq_init (CPUState *env)
+{
+ env->irq_inputs = (void **)qemu_allocate_irqs(&ppce500_set_irq,
+ env, PPCE500_INPUT_NB);
+}
/*****************************************************************************/
/* PowerPC time base and decrementer emulation */
struct ppc_tb_t {
diff --git a/hw/ppc.h b/hw/ppc.h
index 75eb11a..2ec4680 100644
--- a/hw/ppc.h
+++ b/hw/ppc.h
@@ -31,6 +31,7 @@ extern CPUReadMemoryFunc *PPC_io_read[];
void PPC_debug_write (void *opaque, uint32_t addr, uint32_t val);
void ppc40x_irq_init (CPUState *env);
+void ppce500_irq_init (CPUState *env);
void ppc6xx_irq_init (CPUState *env);
void ppc970_irq_init (CPUState *env);
diff --git a/target-ppc/cpu.h b/target-ppc/cpu.h
index f7a12da..0eb794f 100644
--- a/target-ppc/cpu.h
+++ b/target-ppc/cpu.h
@@ -1352,6 +1352,16 @@ enum {
};
enum {
+ /* PowerPC E500 input pins */
+ PPCE500_INPUT_RESET_CORE = 0,
+ PPCE500_INPUT_MCK = 1,
+ PPCE500_INPUT_CINT = 3,
+ PPCE500_INPUT_INT = 4,
+ PPCE500_INPUT_DEBUG = 6,
+ PPCE500_INPUT_NB,
+};
+
+enum {
/* PowerPC 40x input pins */
PPC40x_INPUT_RESET_CORE = 0,
PPC40x_INPUT_RESET_CHIP = 1,
diff --git a/target-ppc/translate_init.c b/target-ppc/translate_init.c
index 5008a3a..7953c69 100644
--- a/target-ppc/translate_init.c
+++ b/target-ppc/translate_init.c
@@ -4154,7 +4154,8 @@ static void init_proc_e300 (CPUPPCState *env)
POWERPC_FLAG_BUS_CLK)
#define check_pow_e500 check_pow_hid0
-__attribute__ (( unused ))
+extern void ppce500_irq_init (CPUState *env);
+
static void init_proc_e500 (CPUPPCState *env)
{
/* Time base */
@@ -4256,7 +4257,8 @@ static void init_proc_e500 (CPUPPCState *env)
init_excp_e200(env);
env->dcache_line_size = 32;
env->icache_line_size = 32;
- /* XXX: TODO: allocate internal IRQ controller */
+ /* Allocate hardware IRQ controller */
+ ppce500_irq_init(env);
}
/* Non-embedded PowerPC */
--
1.5.4
next prev parent reply other threads:[~2009-01-22 10:23 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-22 10:14 [Qemu-devel] [PATCH 0/6] kvm/powerpc: Add emulation for MPC85xx in KVM mode Liu Yu
2009-01-22 10:14 ` [Qemu-devel] [PATCH 1/6] kvm/powerpc: Enable MPIC for MPC85xx platform Liu Yu
2009-01-22 10:14 ` [Qemu-devel] [PATCH 2/6] kvm/powerpc: Add freescale pci controller's support Liu Yu
2009-01-22 10:14 ` Liu Yu [this message]
2009-01-22 10:14 ` [Qemu-devel] [PATCH 4/6] kvm/powerpc: extern one function for MPC85xx code use Liu Yu
2009-01-22 10:14 ` [Qemu-devel] [PATCH 5/6] kvm/powerpc: Add MPC85xx board support Liu Yu
2009-01-22 10:14 ` [Qemu-devel] [PATCH 6/6] kvm/powerpc: flat device tree files for MPC85xx Liu Yu
2009-01-22 15:54 ` [Qemu-devel] " Hollis Blanchard
2009-01-22 16:05 ` [Qemu-devel] Re: [PATCH 5/6] kvm/powerpc: Add MPC85xx board support Hollis Blanchard
2009-01-24 16:36 ` [Qemu-devel] [PATCH 4/6] kvm/powerpc: extern one function for MPC85xx code use Aurelien Jarno
2009-01-24 16:32 ` [Qemu-devel] [PATCH 3/6] kvm/powerpc: Add irq support for E500 core Aurelien Jarno
2009-02-09 8:34 ` [Qemu-devel] [PATCH 3/6] kvm/powerpc: Add irq support for E500core Liu Yu-B13201
2009-01-24 16:02 ` [Qemu-devel] [PATCH 2/6] kvm/powerpc: Add freescale pci controller's support Aurelien Jarno
2009-02-09 8:33 ` [Qemu-devel] [PATCH 2/6] kvm/powerpc: Add freescale pcicontroller's support Liu Yu-B13201
2009-02-09 10:28 ` Aurelien Jarno
2009-01-22 16:13 ` [Qemu-devel] Re: [PATCH 0/6] kvm/powerpc: Add emulation for MPC85xx in KVM mode Hollis Blanchard
2009-01-27 7:38 ` [Qemu-devel] Regarding ARM11Mpcore MMC kernel panic sathish kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1232619256-18807-4-git-send-email-yu.liu@freescale.com \
--to=yu.liu@freescale.com \
--cc=hollisb@us.ibm.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).