* [Qemu-devel] [PATCH] KVM: Fetch sub-leaf cpuid values for functions 4, 0xb, 0xd.
@ 2009-01-12 11:58 Amit Shah
0 siblings, 0 replies; 7+ messages in thread
From: Amit Shah @ 2009-01-12 11:58 UTC (permalink / raw)
To: qemu-devel; +Cc: Amit Shah, aliguori, avi, kvm
CPUID functions 4, 0xb and 0xd have sub-leaf values which depend on the
input value of ECX. Store these values as well.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
qemu/target-i386/kvm.c | 40 +++++++++++++++++++++++++++++-----------
1 files changed, 29 insertions(+), 11 deletions(-)
diff --git a/qemu/target-i386/kvm.c b/qemu/target-i386/kvm.c
index f87bf36..c17e58b 100644
--- a/qemu/target-i386/kvm.c
+++ b/qemu/target-i386/kvm.c
@@ -39,32 +39,50 @@ int kvm_arch_init_vcpu(CPUState *env)
struct kvm_cpuid cpuid;
struct kvm_cpuid_entry entries[100];
} __attribute__((packed)) cpuid_data;
- uint32_t limit, i, cpuid_i;
+ uint32_t limit, i, j, cpuid_i;
uint32_t eax, ebx, ecx, edx;
cpuid_i = 0;
- cpu_x86_cpuid(env, 0, &eax, &ebx, &ecx, &edx);
+ cpu_x86_cpuid(env, 0, 0, &eax, &ebx, &ecx, &edx);
limit = eax;
for (i = 0; i <= limit; i++) {
struct kvm_cpuid_entry *c = &cpuid_data.entries[cpuid_i++];
- cpu_x86_cpuid(env, i, &eax, &ebx, &ecx, &edx);
- c->function = i;
- c->eax = eax;
- c->ebx = ebx;
- c->ecx = ecx;
- c->edx = edx;
+ if (i == 4 || i == 0xb || i == 0xd) {
+ for (j = 0; ; j++) {
+ cpu_x86_cpuid(env, i, j, &eax, &ebx, &ecx, &edx);
+ c->function = i;
+ c->eax = eax;
+ c->ebx = ebx;
+ c->ecx = ecx;
+ c->edx = edx;
+ c = &cpuid_data.entries[++cpuid_i];
+
+ if (i == 4 && eax == 0)
+ break;
+ if (i == 0xb && !(ecx & 0xff00))
+ break;
+ if (i == 0xd && eax == 0)
+ break;
+ }
+ } else {
+ cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
+ c->function = i;
+ c->eax = eax;
+ c->ebx = ebx;
+ c->ecx = ecx;
+ c->edx = edx;
+ }
}
-
- cpu_x86_cpuid(env, 0x80000000, &eax, &ebx, &ecx, &edx);
+ cpu_x86_cpuid(env, 0x80000000, 0, &eax, &ebx, &ecx, &edx);
limit = eax;
for (i = 0x80000000; i <= limit; i++) {
struct kvm_cpuid_entry *c = &cpuid_data.entries[cpuid_i++];
- cpu_x86_cpuid(env, i, &eax, &ebx, &ecx, &edx);
+ cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
c->function = i;
c->eax = eax;
c->ebx = ebx;
--
1.6.0.6
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Qemu-devel] [PATCH] KVM: Fetch sub-leaf cpuid values for functions 4, 0xb, 0xd.
2009-01-13 7:09 ` [Qemu-devel] [PATCH] KVM: CPUID takes ecx as input value for some functions Amit Shah
@ 2009-01-13 7:09 ` Amit Shah
0 siblings, 0 replies; 7+ messages in thread
From: Amit Shah @ 2009-01-13 7:09 UTC (permalink / raw)
To: qemu-devel; +Cc: Amit Shah, aliguori, avi, kvm
CPUID functions 4, 0xb and 0xd have sub-leaf values which depend on the
input value of ECX. Store these values as well.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
qemu/target-i386/kvm.c | 34 ++++++++++++++++++++++++++--------
1 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/qemu/target-i386/kvm.c b/qemu/target-i386/kvm.c
index bef3150..c17e58b 100644
--- a/qemu/target-i386/kvm.c
+++ b/qemu/target-i386/kvm.c
@@ -39,7 +39,7 @@ int kvm_arch_init_vcpu(CPUState *env)
struct kvm_cpuid cpuid;
struct kvm_cpuid_entry entries[100];
} __attribute__((packed)) cpuid_data;
- uint32_t limit, i, cpuid_i;
+ uint32_t limit, i, j, cpuid_i;
uint32_t eax, ebx, ecx, edx;
cpuid_i = 0;
@@ -50,14 +50,32 @@ int kvm_arch_init_vcpu(CPUState *env)
for (i = 0; i <= limit; i++) {
struct kvm_cpuid_entry *c = &cpuid_data.entries[cpuid_i++];
- cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
- c->function = i;
- c->eax = eax;
- c->ebx = ebx;
- c->ecx = ecx;
- c->edx = edx;
+ if (i == 4 || i == 0xb || i == 0xd) {
+ for (j = 0; ; j++) {
+ cpu_x86_cpuid(env, i, j, &eax, &ebx, &ecx, &edx);
+ c->function = i;
+ c->eax = eax;
+ c->ebx = ebx;
+ c->ecx = ecx;
+ c->edx = edx;
+ c = &cpuid_data.entries[++cpuid_i];
+
+ if (i == 4 && eax == 0)
+ break;
+ if (i == 0xb && !(ecx & 0xff00))
+ break;
+ if (i == 0xd && eax == 0)
+ break;
+ }
+ } else {
+ cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
+ c->function = i;
+ c->eax = eax;
+ c->ebx = ebx;
+ c->ecx = ecx;
+ c->edx = edx;
+ }
}
-
cpu_x86_cpuid(env, 0x80000000, 0, &eax, &ebx, &ecx, &edx);
limit = eax;
--
1.6.0.6
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Qemu-devel] [PATCH] KVM: Fetch sub-leaf cpuid values for functions 4, 0xb, 0xd.
2009-02-04 16:34 ` [Qemu-devel] [PATCH] KVM: CPUID takes ecx as input value for some functions Amit Shah
@ 2009-02-04 16:34 ` Amit Shah
0 siblings, 0 replies; 7+ messages in thread
From: Amit Shah @ 2009-02-04 16:34 UTC (permalink / raw)
To: aliguori; +Cc: Amit Shah, qemu-devel
CPUID functions 4, 0xb and 0xd have sub-leaf values which depend on the
input value of ECX. Store these values as well.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
qemu/target-i386/kvm.c | 53 +++++++++++++++++++++++++++++++++++------------
1 files changed, 39 insertions(+), 14 deletions(-)
diff --git a/qemu/target-i386/kvm.c b/qemu/target-i386/kvm.c
index 5de3264..b9c106e 100644
--- a/qemu/target-i386/kvm.c
+++ b/qemu/target-i386/kvm.c
@@ -36,10 +36,10 @@
int kvm_arch_init_vcpu(CPUState *env)
{
struct {
- struct kvm_cpuid cpuid;
- struct kvm_cpuid_entry entries[100];
+ struct kvm_cpuid2 cpuid;
+ struct kvm_cpuid_entry2 entries[100];
} __attribute__((packed)) cpuid_data;
- uint32_t limit, i, cpuid_i;
+ uint32_t limit, i, j, cpuid_i;
uint32_t eax, ebx, ecx, edx;
cpuid_i = 0;
@@ -48,21 +48,46 @@ int kvm_arch_init_vcpu(CPUState *env)
limit = eax;
for (i = 0; i <= limit; i++) {
- struct kvm_cpuid_entry *c = &cpuid_data.entries[cpuid_i++];
-
- cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
- c->function = i;
- c->eax = eax;
- c->ebx = ebx;
- c->ecx = ecx;
- c->edx = edx;
+ struct kvm_cpuid_entry2 *c = &cpuid_data.entries[cpuid_i++];
+
+ switch (i) {
+ case 4:
+ case 0xb:
+ case 0xd:
+ for (j = 0; ; j++) {
+ cpu_x86_cpuid(env, i, j, &eax, &ebx, &ecx, &edx);
+ c->function = i;
+ c->flags = KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
+ c->index = j;
+ c->eax = eax;
+ c->ebx = ebx;
+ c->ecx = ecx;
+ c->edx = edx;
+ c = &cpuid_data.entries[++cpuid_i];
+
+ if (i == 4 && eax == 0)
+ break;
+ if (i == 0xb && !(ecx & 0xff00))
+ break;
+ if (i == 0xd && eax == 0)
+ break;
+ }
+ break;
+ default:
+ cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
+ c->function = i;
+ c->eax = eax;
+ c->ebx = ebx;
+ c->ecx = ecx;
+ c->edx = edx;
+ break;
+ }
}
-
cpu_x86_cpuid(env, 0x80000000, 0, &eax, &ebx, &ecx, &edx);
limit = eax;
for (i = 0x80000000; i <= limit; i++) {
- struct kvm_cpuid_entry *c = &cpuid_data.entries[cpuid_i++];
+ struct kvm_cpuid_entry2 *c = &cpuid_data.entries[cpuid_i++];
cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
c->function = i;
@@ -74,7 +99,7 @@ int kvm_arch_init_vcpu(CPUState *env)
cpuid_data.cpuid.nent = cpuid_i;
- return kvm_vcpu_ioctl(env, KVM_SET_CPUID, &cpuid_data);
+ return kvm_vcpu_ioctl(env, KVM_SET_CPUID2, &cpuid_data);
}
static int kvm_has_msr_star(CPUState *env)
--
1.6.0.6
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Qemu-devel] v23: KVM: Complete support for cpuid functions 2, 4, b, d
@ 2009-02-09 14:09 Amit Shah
2009-02-09 14:09 ` [Qemu-devel] [PATCH] KVM: CPUID takes ecx as input value for some functions Amit Shah
0 siblings, 1 reply; 7+ messages in thread
From: Amit Shah @ 2009-02-09 14:09 UTC (permalink / raw)
To: aliguori; +Cc: qemu-devel
Not really v23, this is rebased to qemu-svn and also fixes
a small bug for cpuid function 2.
Please apply.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [PATCH] KVM: CPUID takes ecx as input value for some functions
2009-02-09 14:09 [Qemu-devel] v23: KVM: Complete support for cpuid functions 2, 4, b, d Amit Shah
@ 2009-02-09 14:09 ` Amit Shah
2009-02-09 14:09 ` [Qemu-devel] [PATCH] KVM: Fetch sub-leaf cpuid values for functions 4, 0xb, 0xd Amit Shah
0 siblings, 1 reply; 7+ messages in thread
From: Amit Shah @ 2009-02-09 14:09 UTC (permalink / raw)
To: aliguori; +Cc: Amit Shah, qemu-devel
The CPUID instruction takes the value of ECX as an input parameter
in addition to the value of EAX as the count for functions 4, 0xb
and 0xd. Make sure we pass the value to the instruction.
Also convert to the qemu-style whitespace for the surrounding code.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
qemu/target-i386/cpu.h | 2 +-
qemu/target-i386/helper.c | 34 +++++++++++++++++-----------------
qemu/target-i386/kvm.c | 8 ++++----
qemu/target-i386/op_helper.c | 2 +-
4 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/qemu/target-i386/cpu.h b/qemu/target-i386/cpu.h
index 0a4f1d7..a6bbeb2 100644
--- a/qemu/target-i386/cpu.h
+++ b/qemu/target-i386/cpu.h
@@ -772,7 +772,7 @@ int cpu_x86_signal_handler(int host_signum, void *pinfo,
int cpu_x86_handle_mmu_fault(CPUX86State *env, target_ulong addr,
int is_write, int mmu_idx, int is_softmmu);
void cpu_x86_set_a20(CPUX86State *env, int a20_state);
-void cpu_x86_cpuid(CPUX86State *env, uint32_t index,
+void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
uint32_t *eax, uint32_t *ebx,
uint32_t *ecx, uint32_t *edx);
diff --git a/qemu/target-i386/helper.c b/qemu/target-i386/helper.c
index 5950c97..7152dc4 100644
--- a/qemu/target-i386/helper.c
+++ b/qemu/target-i386/helper.c
@@ -1403,7 +1403,8 @@ static void breakpoint_handler(CPUState *env)
}
#endif /* !CONFIG_USER_ONLY */
-static void host_cpuid(uint32_t function, uint32_t *eax, uint32_t *ebx,
+static void host_cpuid(uint32_t function, uint32_t count,
+ uint32_t *eax, uint32_t *ebx,
uint32_t *ecx, uint32_t *edx)
{
#if defined(CONFIG_KVM)
@@ -1411,19 +1412,19 @@ static void host_cpuid(uint32_t function, uint32_t *eax, uint32_t *ebx,
#ifdef __x86_64__
asm volatile("cpuid"
- : "=a"(vec[0]), "=b"(vec[1]),
- "=c"(vec[2]), "=d"(vec[3])
- : "0"(function) : "cc");
+ : "=a"(vec[0]), "=b"(vec[1]),
+ "=c"(vec[2]), "=d"(vec[3])
+ : "0"(function), "c"(count) : "cc");
#else
asm volatile("pusha \n\t"
- "cpuid \n\t"
- "mov %%eax, 0(%1) \n\t"
- "mov %%ebx, 4(%1) \n\t"
- "mov %%ecx, 8(%1) \n\t"
- "mov %%edx, 12(%1) \n\t"
- "popa"
- : : "a"(function), "S"(vec)
- : "memory", "cc");
+ "cpuid \n\t"
+ "mov %%eax, 0(%1) \n\t"
+ "mov %%ebx, 4(%1) \n\t"
+ "mov %%ecx, 8(%1) \n\t"
+ "mov %%edx, 12(%1) \n\t"
+ "popa"
+ : : "a"(function), "c"(count), "S"(vec)
+ : "memory", "cc");
#endif
if (eax)
@@ -1437,7 +1438,7 @@ static void host_cpuid(uint32_t function, uint32_t *eax, uint32_t *ebx,
#endif
}
-void cpu_x86_cpuid(CPUX86State *env, uint32_t index,
+void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
uint32_t *eax, uint32_t *ebx,
uint32_t *ecx, uint32_t *edx)
{
@@ -1462,7 +1463,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index,
* actuall cpu, and say goodbye to migration between different vendors
* is you use compatibility mode. */
if (kvm_enabled())
- host_cpuid(0, NULL, ebx, ecx, edx);
+ host_cpuid(0, 0, NULL, ebx, ecx, edx);
break;
case 1:
*eax = env->cpuid_version;
@@ -1483,7 +1484,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index,
break;
case 4:
/* cache info: needed for Core compatibility */
- switch (*ecx) {
+ switch (count) {
case 0: /* L1 dcache info */
*eax = 0x0000121;
*ebx = 0x1c0003f;
@@ -1509,7 +1510,6 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index,
*edx = 0;
break;
}
-
break;
case 5:
/* mwait info: needed for Core compatibility */
@@ -1554,7 +1554,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index,
if (kvm_enabled()) {
uint32_t h_eax, h_edx;
- host_cpuid(0x80000001, &h_eax, NULL, NULL, &h_edx);
+ host_cpuid(index, 0, &h_eax, NULL, NULL, &h_edx);
/* disable CPU features that the host does not support */
diff --git a/qemu/target-i386/kvm.c b/qemu/target-i386/kvm.c
index 0834e62..123f7d2 100644
--- a/qemu/target-i386/kvm.c
+++ b/qemu/target-i386/kvm.c
@@ -44,13 +44,13 @@ int kvm_arch_init_vcpu(CPUState *env)
cpuid_i = 0;
- cpu_x86_cpuid(env, 0, &eax, &ebx, &ecx, &edx);
+ cpu_x86_cpuid(env, 0, 0, &eax, &ebx, &ecx, &edx);
limit = eax;
for (i = 0; i <= limit; i++) {
struct kvm_cpuid_entry *c = &cpuid_data.entries[cpuid_i++];
- cpu_x86_cpuid(env, i, &eax, &ebx, &ecx, &edx);
+ cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
c->function = i;
c->eax = eax;
c->ebx = ebx;
@@ -58,13 +58,13 @@ int kvm_arch_init_vcpu(CPUState *env)
c->edx = edx;
}
- cpu_x86_cpuid(env, 0x80000000, &eax, &ebx, &ecx, &edx);
+ cpu_x86_cpuid(env, 0x80000000, 0, &eax, &ebx, &ecx, &edx);
limit = eax;
for (i = 0x80000000; i <= limit; i++) {
struct kvm_cpuid_entry *c = &cpuid_data.entries[cpuid_i++];
- cpu_x86_cpuid(env, i, &eax, &ebx, &ecx, &edx);
+ cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
c->function = i;
c->eax = eax;
c->ebx = ebx;
diff --git a/qemu/target-i386/op_helper.c b/qemu/target-i386/op_helper.c
index 87c7a57..217916a 100644
--- a/qemu/target-i386/op_helper.c
+++ b/qemu/target-i386/op_helper.c
@@ -1913,7 +1913,7 @@ void helper_cpuid(void)
helper_svm_check_intercept_param(SVM_EXIT_CPUID, 0);
- cpu_x86_cpuid(env, (uint32_t)EAX, &eax, &ebx, &ecx, &edx);
+ cpu_x86_cpuid(env, (uint32_t)EAX, (uint32_t)ECX, &eax, &ebx, &ecx, &edx);
EAX = eax;
EBX = ebx;
ECX = ecx;
--
1.6.0.6
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Qemu-devel] [PATCH] KVM: Fetch sub-leaf cpuid values for functions 4, 0xb, 0xd.
2009-02-09 14:09 ` [Qemu-devel] [PATCH] KVM: CPUID takes ecx as input value for some functions Amit Shah
@ 2009-02-09 14:09 ` Amit Shah
2009-02-09 14:09 ` [Qemu-devel] [PATCH] KVM: Get all cpuid values from function 2 Amit Shah
0 siblings, 1 reply; 7+ messages in thread
From: Amit Shah @ 2009-02-09 14:09 UTC (permalink / raw)
To: aliguori; +Cc: Amit Shah, qemu-devel
CPUID functions 4, 0xb and 0xd have sub-leaf values which depend on the
input value of ECX. Store these values as well.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
qemu/target-i386/kvm.c | 53 +++++++++++++++++++++++++++++++++++------------
1 files changed, 39 insertions(+), 14 deletions(-)
diff --git a/qemu/target-i386/kvm.c b/qemu/target-i386/kvm.c
index 123f7d2..a7ff14f 100644
--- a/qemu/target-i386/kvm.c
+++ b/qemu/target-i386/kvm.c
@@ -36,10 +36,10 @@
int kvm_arch_init_vcpu(CPUState *env)
{
struct {
- struct kvm_cpuid cpuid;
- struct kvm_cpuid_entry entries[100];
+ struct kvm_cpuid2 cpuid;
+ struct kvm_cpuid_entry2 entries[100];
} __attribute__((packed)) cpuid_data;
- uint32_t limit, i, cpuid_i;
+ uint32_t limit, i, j, cpuid_i;
uint32_t eax, ebx, ecx, edx;
cpuid_i = 0;
@@ -48,21 +48,46 @@ int kvm_arch_init_vcpu(CPUState *env)
limit = eax;
for (i = 0; i <= limit; i++) {
- struct kvm_cpuid_entry *c = &cpuid_data.entries[cpuid_i++];
-
- cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
- c->function = i;
- c->eax = eax;
- c->ebx = ebx;
- c->ecx = ecx;
- c->edx = edx;
+ struct kvm_cpuid_entry2 *c = &cpuid_data.entries[cpuid_i++];
+
+ switch (i) {
+ case 4:
+ case 0xb:
+ case 0xd:
+ for (j = 0; ; j++) {
+ cpu_x86_cpuid(env, i, j, &eax, &ebx, &ecx, &edx);
+ c->function = i;
+ c->flags = KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
+ c->index = j;
+ c->eax = eax;
+ c->ebx = ebx;
+ c->ecx = ecx;
+ c->edx = edx;
+ c = &cpuid_data.entries[++cpuid_i];
+
+ if (i == 4 && eax == 0)
+ break;
+ if (i == 0xb && !(ecx & 0xff00))
+ break;
+ if (i == 0xd && eax == 0)
+ break;
+ }
+ break;
+ default:
+ cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
+ c->function = i;
+ c->eax = eax;
+ c->ebx = ebx;
+ c->ecx = ecx;
+ c->edx = edx;
+ break;
+ }
}
-
cpu_x86_cpuid(env, 0x80000000, 0, &eax, &ebx, &ecx, &edx);
limit = eax;
for (i = 0x80000000; i <= limit; i++) {
- struct kvm_cpuid_entry *c = &cpuid_data.entries[cpuid_i++];
+ struct kvm_cpuid_entry2 *c = &cpuid_data.entries[cpuid_i++];
cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
c->function = i;
@@ -74,7 +99,7 @@ int kvm_arch_init_vcpu(CPUState *env)
cpuid_data.cpuid.nent = cpuid_i;
- return kvm_vcpu_ioctl(env, KVM_SET_CPUID, &cpuid_data);
+ return kvm_vcpu_ioctl(env, KVM_SET_CPUID2, &cpuid_data);
}
static int kvm_has_msr_star(CPUState *env)
--
1.6.0.6
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Qemu-devel] [PATCH] KVM: Get all cpuid values from function 2
2009-02-09 14:09 ` [Qemu-devel] [PATCH] KVM: Fetch sub-leaf cpuid values for functions 4, 0xb, 0xd Amit Shah
@ 2009-02-09 14:09 ` Amit Shah
0 siblings, 0 replies; 7+ messages in thread
From: Amit Shah @ 2009-02-09 14:09 UTC (permalink / raw)
To: aliguori; +Cc: Amit Shah, qemu-devel
cpuid function 2 can have multiple values to describe cache behaviour.
Loop till we have fetched all the values.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
qemu/target-i386/kvm.c | 27 +++++++++++++++++++++++++++
1 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/qemu/target-i386/kvm.c b/qemu/target-i386/kvm.c
index a7ff14f..86745b1 100644
--- a/qemu/target-i386/kvm.c
+++ b/qemu/target-i386/kvm.c
@@ -51,6 +51,33 @@ int kvm_arch_init_vcpu(CPUState *env)
struct kvm_cpuid_entry2 *c = &cpuid_data.entries[cpuid_i++];
switch (i) {
+ case 2: {
+ /* Keep reading function 2 till all the input is received */
+ int times;
+
+ cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
+ times = eax & 0xff;
+
+ c->function = i;
+ c->flags |= KVM_CPUID_FLAG_STATEFUL_FUNC;
+ c->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT;
+ c->eax = eax;
+ c->ebx = ebx;
+ c->ecx = ecx;
+ c->edx = edx;
+
+ for (j = 1; j < times; ++j) {
+ cpu_x86_cpuid(env, i, 0, &eax, &ebx, &ecx, &edx);
+ c->function = i;
+ c->flags |= KVM_CPUID_FLAG_STATEFUL_FUNC;
+ c->eax = eax;
+ c->ebx = ebx;
+ c->ecx = ecx;
+ c->edx = edx;
+ c = &cpuid_data.entries[++cpuid_i];
+ }
+ break;
+ }
case 4:
case 0xb:
case 0xd:
--
1.6.0.6
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-02-09 14:09 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-09 14:09 [Qemu-devel] v23: KVM: Complete support for cpuid functions 2, 4, b, d Amit Shah
2009-02-09 14:09 ` [Qemu-devel] [PATCH] KVM: CPUID takes ecx as input value for some functions Amit Shah
2009-02-09 14:09 ` [Qemu-devel] [PATCH] KVM: Fetch sub-leaf cpuid values for functions 4, 0xb, 0xd Amit Shah
2009-02-09 14:09 ` [Qemu-devel] [PATCH] KVM: Get all cpuid values from function 2 Amit Shah
-- strict thread matches above, loose matches on Subject: below --
2009-02-04 16:34 [Qemu-devel] KVM: completely support cpuid functions 2, 4, b, d Amit Shah
2009-02-04 16:34 ` [Qemu-devel] [PATCH] KVM: CPUID takes ecx as input value for some functions Amit Shah
2009-02-04 16:34 ` [Qemu-devel] [PATCH] KVM: Fetch sub-leaf cpuid values for functions 4, 0xb, 0xd Amit Shah
2009-01-13 7:09 [Qemu-devel] v2: KVM: support for 'count' in CPUID functions 4, 0xb and 0xd Amit Shah
2009-01-13 7:09 ` [Qemu-devel] [PATCH] KVM: CPUID takes ecx as input value for some functions Amit Shah
2009-01-13 7:09 ` [Qemu-devel] [PATCH] KVM: Fetch sub-leaf cpuid values for functions 4, 0xb, 0xd Amit Shah
2009-01-12 11:58 Amit Shah
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).