qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Liu Yu <yu.liu@freescale.com>
To: qemu-devel@nongnu.org, aurelien@aurel32.net, hollisb@us.ibm.com,
	blauwirbel@gmail.com
Cc: Liu Yu <yu.liu@freescale.com>, kvm-ppc@vger.kernel.org
Subject: [Qemu-devel] [PATCH 5/5] kvm/powerpc: flat device tree files for MPC8544DS
Date: Thu, 26 Feb 2009 18:35:45 +0800	[thread overview]
Message-ID: <1235644545-20816-6-git-send-email-yu.liu@freescale.com> (raw)
In-Reply-To: <1235644545-20816-5-git-send-email-yu.liu@freescale.com>

mpc8544ds.dts is copied from kerenl.
Non-supported devices has been removed.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
---
 pc-bios/mpc8544ds.dtb |  Bin 0 -> 12288 bytes
 pc-bios/mpc8544ds.dts |  122 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 122 insertions(+), 0 deletions(-)
 create mode 100644 pc-bios/mpc8544ds.dtb
 create mode 100644 pc-bios/mpc8544ds.dts

diff --git a/pc-bios/mpc8544ds.dtb b/pc-bios/mpc8544ds.dtb
new file mode 100644
index 0000000000000000000000000000000000000000..3299546696bf21f53f8ce2c9eba7fcb740c547da
GIT binary patch
literal 12288
zcmeHIJ8u&~5Z)um5MBxr1r@SLgOE>gBs)q$VJkovDTp5sUCx{MlzVY^28Sx5qJ!T+
zNtKd<A{{NFM>0PEYG{D@_IA$pB`MM&G$W079^cH)ez$l2eEs)#rP_+*gHo3YTJMqG
zBwZpUakiCed@SvM>esQ;EYNxd_U6{cdbiVg__RzQev7m*jT>t`E)mFIB*j_Li~Xkc
z9WM;LT<7GP+#On5D|zB$lb&vuvXbj8@WNiF+cqptv7NKAYqQuJ)c3(k>IbIhI<>`)
zN?jmz{B&dnAe-kqZC>D=t>lHywl-R3zOo6|^r;Up>~F#$VgCu)%^BaX`BZ#Jp$h-1
z=D$Ibg!{cK-O4|*KF(y$73nC+4onm^mq`1y*ky|GoB*1-I{iqH@V=*UGy81&RL}UU
zWHj<1N<;1LSeDV}8tE~qn&4*%Kc>H#XJT9v<URSUPVFXe{*x&wdzf>UI1>d1eH(GU
zy4LNQhsH5F`y)!3YtFrxN5*_1z<pA1!<etOsN~DuPJ81RgPE9@bI$bGmR9?nd!{t-
zdmX$z)QJQ$L4J_(e0Yu!>pNKajOD$+n+q*5c!wJPFiTrWs$-XSFey{NNM?UNT=m8G
z0X(3$;p^mU$XGS|9G3{+*v-RMl;U&HcBzg+6}CU)6V|z_)KBDDz&Xw|p<Gv~*Br-+
zd3YvT=W=F7%A>ZPvoXU;JqM=H)9PC?E8)1UpUd%nwtg<h`&rCfuC`yr3*SxD;yL2}
z-X=v48*?_uhWsH#tWA0h0OZ&z>?SFOXZglP8AL7SI9mACdrzzN&0PY5^G&jOf8cTV
zkb|1LHc^LUE|D6X;}4Tu$8ZgX{ui9hv%mG#{{r@aE=I{fhssZ))GLCWP^)EcFvxVC
zyS@&?TrKCpOKt7)ThUhKx~k}2wbejB4}85{9Hd%hdQS~p-}8ss4TD&_C|1FV2xI2b
z#wmhG@6aEeyPN4}BOUt(iav)ko*yRu{*0e_@gDsxVpunb2YRf6xX@WPN{f7Ix~Z4x
zxR?p}NnB(}80t(dR~7c0H2P@VN{3!NAVQ|u$V=VG%lGF)W<WEBDhu;skc<l2vKZpA
zhzJA1fG{8o2m``^Fdz&F1HynXAPfit!hkR!3<v|lfG{8o2m``^Fdz&F1HynXAPfit
W!hkR!3<v|lfG{8o2m}8&1AhU`J`#BV

literal 0
HcmV?d00001

diff --git a/pc-bios/mpc8544ds.dts b/pc-bios/mpc8544ds.dts
new file mode 100644
index 0000000..872152d
--- /dev/null
+++ b/pc-bios/mpc8544ds.dts
@@ -0,0 +1,122 @@
+/*
+ * MPC8544 DS Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "MPC8544DS";
+	compatible = "MPC8544DS", "MPC85xxDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8544@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;	// Filled by U-Boot
+	};
+
+	soc8544@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	pci0: pci@e0008000 {
+		cell-index = <0>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x12 J16 Slot 2 */
+
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+	};
+
+	chosen {
+		linux,stdout-path = "/soc8544@e0000000/serial@4500";
+	};
+};
-- 
1.5.4

  reply	other threads:[~2009-02-26 10:48 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-26 10:35 [Qemu-devel] [PATCH v4 0/5] powerpc/kvm: Add MPC8544DS board support Liu Yu
2009-02-26 10:35 ` [Qemu-devel] [PATCH 1/5] kvm/powerpc: Enable MPIC for E500 platform Liu Yu
2009-02-26 10:35   ` [Qemu-devel] [PATCH 2/5] kvm/powerpc: Add freescale pci controller's support Liu Yu
2009-02-26 10:35     ` [Qemu-devel] [PATCH 3/5] kvm/powerpc: Add irq support for E500 core Liu Yu
2009-02-26 10:35       ` [Qemu-devel] [PATCH 4/5] kvm/powerpc: Add MPC8544DS board support Liu Yu
2009-02-26 10:35         ` Liu Yu [this message]
2009-02-26 16:21           ` [Qemu-devel] Re: [PATCH 5/5] kvm/powerpc: flat device tree files for MPC8544DS Hollis Blanchard
2009-02-26 16:18         ` [Qemu-devel] Re: [PATCH 4/5] kvm/powerpc: Add MPC8544DS board support Hollis Blanchard
2009-02-26 18:47   ` [Qemu-devel] Re: [PATCH 1/5] kvm/powerpc: Enable MPIC for E500 platform Blue Swirl
2009-02-27  2:00     ` [Qemu-devel] " Liu Yu-B13201
2009-02-27 20:04       ` [Qemu-devel] " Blue Swirl
2009-03-02 16:42         ` Aurelien Jarno
2009-03-02 16:42 ` [Qemu-devel] Re: [PATCH v4 0/5] powerpc/kvm: Add MPC8544DS board support Aurelien Jarno
  -- strict thread matches above, loose matches on Subject: below --
2009-02-17  9:59 [Qemu-devel] " Liu Yu
2009-02-17  9:59 ` [Qemu-devel] [PATCH 1/5] kvm/powerpc: Enable MPIC for E500 platform Liu Yu
2009-02-17  9:59   ` [Qemu-devel] [PATCH 2/5] kvm/powerpc: Add freescale pci controller's support Liu Yu
2009-02-17  9:59     ` [Qemu-devel] [PATCH 3/5] kvm/powerpc: Add irq support for E500 core Liu Yu
2009-02-17  9:59       ` [Qemu-devel] [PATCH 4/5] kvm/powerpc: Add MPC8544DS board support Liu Yu
2009-02-17  9:59         ` [Qemu-devel] [PATCH 5/5] kvm/powerpc: flat device tree files for MPC8544DS Liu Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1235644545-20816-6-git-send-email-yu.liu@freescale.com \
    --to=yu.liu@freescale.com \
    --cc=aurelien@aurel32.net \
    --cc=blauwirbel@gmail.com \
    --cc=hollisb@us.ibm.com \
    --cc=kvm-ppc@vger.kernel.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).